target/linux/generic/patches-4.9/700-swconfig_switch_drivers.patch

   1 --- a/drivers/net/phy/Kconfig
   2 +++ b/drivers/net/phy/Kconfig
   3 @@ -147,6 +147,89 @@ config MDIO_XGENE
   4           This module provides a driver for the MDIO busses found in the
   5           APM X-Gene SoC's.
   6
   7 +comment "Switch configuration API + drivers"
   8 +
   9 +config SWCONFIG
  10 +       tristate "Switch configuration API"
  11 +       ---help---
  12 +         Switch configuration API using netlink. This allows
  13 +         you to configure the VLAN features of certain switches.
  14 +
  15 +config SWCONFIG_LEDS
  16 +       bool "Switch LED trigger support"
  17 +       depends on (SWCONFIG && LEDS_TRIGGERS)
  18 +
  19 +config ADM6996_PHY
  20 +       tristate "Driver for ADM6996 switches"
  21 +       select SWCONFIG
  22 +       ---help---
  23 +         Currently supports the ADM6996FC and ADM6996M switches.
  24 +         Support for FC is very limited.
  25 +
  26 +config AR8216_PHY
  27 +       tristate "Driver for Atheros AR8216 switches"
  28 +       select ETHERNET_PACKET_MANGLE
  29 +       select SWCONFIG
  30 +
  31 +config AR8216_PHY_LEDS
  32 +       bool "Atheros AR8216 switch LED support"
  33 +       depends on (AR8216_PHY && LEDS_CLASS)
  34 +
  35 +source "drivers/net/phy/b53/Kconfig"
  36 +
  37 +config IP17XX_PHY
  38 +       tristate "Driver for IC+ IP17xx switches"
  39 +       select SWCONFIG
  40 +
  41 +config MVSWITCH_PHY
  42 +       tristate "Driver for Marvell 88E6060 switches"
  43 +       select ETHERNET_PACKET_MANGLE
  44 +
  45 +config MVSW61XX_PHY
  46 +       tristate "Driver for Marvell 88E6171/6172 switches"
  47 +       select SWCONFIG
  48 +
  49 +config PSB6970_PHY
  50 +       tristate "Lantiq XWAY Tantos (PSB6970) Ethernet switch"
  51 +       select SWCONFIG
  52 +       select ETHERNET_PACKET_MANGLE
  53 +
  54 +config RTL8306_PHY
  55 +       tristate "Driver for Realtek RTL8306S switches"
  56 +       select SWCONFIG
  57 +
  58 +config RTL8366_SMI
  59 +       tristate "Driver for the RTL8366 SMI interface"
  60 +       depends on GPIOLIB
  61 +       ---help---
  62 +         This module implements the SMI interface protocol which is used
  63 +         by some RTL8366 ethernet switch devices via the generic GPIO API.
  64 +
  65 +if RTL8366_SMI
  66 +
  67 +config RTL8366_SMI_DEBUG_FS
  68 +       bool "RTL8366 SMI interface debugfs support"
  69 +        depends on DEBUG_FS
  70 +        default n
  71 +
  72 +config RTL8366S_PHY
  73 +       tristate "Driver for the Realtek RTL8366S switch"
  74 +       select SWCONFIG
  75 +
  76 +config RTL8366RB_PHY
  77 +       tristate "Driver for the Realtek RTL8366RB switch"
  78 +       select SWCONFIG
  79 +
  80 +config RTL8367_PHY
  81 +       tristate "Driver for the Realtek RTL8367R/M switches"
  82 +       select SWCONFIG
  83 +
  84 +config RTL8367B_PHY
  85 +       tristate "Driver fot the Realtek RTL8367R-VB switch"
  86 +       select SWCONFIG
  87 +
  88 +endif # RTL8366_SMI
  89 +
  90  comment "MII PHY device drivers"
  91
  92  config AMD_PHY
  93 --- a/drivers/net/phy/Makefile
  94 +++ b/drivers/net/phy/Makefile
  95 @@ -5,6 +5,21 @@ libphy-$(CONFIG_SWPHY)         += swphy.o
  96
  97  obj-$(CONFIG_PHYLIB)           += libphy.o
  98
  99 +obj-$(CONFIG_SWCONFIG)         += swconfig.o
 100 +obj-$(CONFIG_ADM6996_PHY)      += adm6996.o
 101 +obj-$(CONFIG_AR8216_PHY)       += ar8216.o ar8327.o
 102 +obj-$(CONFIG_SWCONFIG_B53)     += b53/
 103 +obj-$(CONFIG_IP17XX_PHY)       += ip17xx.o
 104 +obj-$(CONFIG_MVSWITCH_PHY)     += mvswitch.o
 105 +obj-$(CONFIG_MVSW61XX_PHY)     += mvsw61xx.o
 106 +obj-$(CONFIG_PSB6970_PHY)      += psb6970.o
 107 +obj-$(CONFIG_RTL8306_PHY)      += rtl8306.o
 108 +obj-$(CONFIG_RTL8366_SMI)      += rtl8366_smi.o
 109 +obj-$(CONFIG_RTL8366S_PHY)     += rtl8366s.o
 110 +obj-$(CONFIG_RTL8366RB_PHY)    += rtl8366rb.o
 111 +obj-$(CONFIG_RTL8367_PHY)      += rtl8367.o
 112 +obj-$(CONFIG_RTL8367B_PHY)     += rtl8367b.o
 113 +
 114  obj-$(CONFIG_MDIO_BCM_IPROC)   += mdio-bcm-iproc.o
 115  obj-$(CONFIG_MDIO_BCM_UNIMAC)  += mdio-bcm-unimac.o
 116  obj-$(CONFIG_MDIO_BITBANG)     += mdio-bitbang.o
 117 --- a/include/uapi/linux/Kbuild
 118 +++ b/include/uapi/linux/Kbuild
 119 @@ -399,6 +399,7 @@ header-y += stddef.h
 120  header-y += string.h
 121  header-y += suspend_ioctls.h
 122  header-y += swab.h
 123 +header-y += switch.h
 124  header-y += synclink.h
 125  header-y += sync_file.h
 126  header-y += sysctl.h