target/linux/generic/pending-4.14/734-net-phy-at803x-allow-to-configure-via-pdata.patch

   1 From: Gabor Juhos <juhosg@openwrt.org>
   2 Subject: net: phy: allow to configure AR803x PHYs via platform data
   3
   4 Add a patch for the at803x phy driver, in order to be able
   5 to configure some register settings via platform data.
   6
   7 Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
   8 ---
   9  drivers/net/phy/at803x.c                 | 56 ++++++++++++++++++++++++++++++++
  10  include/linux/platform_data/phy-at803x.h | 11 +++++++
  11  2 files changed, 67 insertions(+)
  12  create mode 100644 include/linux/platform_data/phy-at803x.h
  13
  14 --- a/drivers/net/phy/at803x.c
  15 +++ b/drivers/net/phy/at803x.c
  16 @@ -12,12 +12,14 @@
  17   */
  18
  19  #include <linux/phy.h>
  20 +#include <linux/mdio.h>
  21  #include <linux/module.h>
  22  #include <linux/string.h>
  23  #include <linux/netdevice.h>
  24  #include <linux/etherdevice.h>
  25  #include <linux/of_gpio.h>
  26  #include <linux/gpio/consumer.h>
  27 +#include <linux/platform_data/phy-at803x.h>
  28
  29  #define AT803X_INTR_ENABLE                     0x12
  30  #define AT803X_INTR_ENABLE_AUTONEG_ERR         BIT(15)
  31 @@ -45,6 +47,11 @@
  32  #define AT803X_REG_CHIP_CONFIG                 0x1f
  33  #define AT803X_BT_BX_REG_SEL                   0x8000
  34
  35 +#define AT803X_PCS_SMART_EEE_CTRL3                     0x805D
  36 +#define AT803X_SMART_EEE_CTRL3_LPI_TX_DELAY_SEL_MASK   0x3
  37 +#define AT803X_SMART_EEE_CTRL3_LPI_TX_DELAY_SEL_SHIFT  12
  38 +#define AT803X_SMART_EEE_CTRL3_LPI_EN                  BIT(8)
  39 +
  40  #define AT803X_DEBUG_ADDR                      0x1D
  41  #define AT803X_DEBUG_DATA                      0x1E
  42
  43 @@ -73,6 +80,7 @@ MODULE_LICENSE("GPL");
  44  struct at803x_priv {
  45         bool phy_reset:1;
  46         struct gpio_desc *gpiod_reset;
  47 +       int prev_speed;
  48  };
  49
  50  struct at803x_context {
  51 @@ -273,8 +281,16 @@ does_not_require_reset_workaround:
  52         return 0;
  53  }
  54
  55 +static void at803x_disable_smarteee(struct phy_device *phydev)
  56 +{
  57 +       phy_write_mmd(phydev, MDIO_MMD_PCS, AT803X_PCS_SMART_EEE_CTRL3,
  58 +               1 << AT803X_SMART_EEE_CTRL3_LPI_TX_DELAY_SEL_SHIFT);
  59 +       phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_ADV, 0);
  60 +}
  61 +
  62  static int at803x_config_init(struct phy_device *phydev)
  63  {
  64 +       struct at803x_platform_data *pdata;
  65         int ret;
  66
  67         ret = genphy_config_init(phydev);
  68 @@ -295,6 +311,26 @@ static int at803x_config_init(struct phy
  69                         return ret;
  70         }
  71
  72 +       pdata = dev_get_platdata(&phydev->mdio.dev);
  73 +       if (pdata) {
  74 +               if (pdata->disable_smarteee)
  75 +                       at803x_disable_smarteee(phydev);
  76 +
  77 +               if (pdata->enable_rgmii_rx_delay)
  78 +                       at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_0, 0,
  79 +                               AT803X_DEBUG_RX_CLK_DLY_EN);
  80 +               else
  81 +                       at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_0,
  82 +                               AT803X_DEBUG_RX_CLK_DLY_EN, 0);
  83 +
  84 +               if (pdata->enable_rgmii_tx_delay)
  85 +                       at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_5, 0,
  86 +                               AT803X_DEBUG_TX_CLK_DLY_EN);
  87 +               else
  88 +                       at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_5,
  89 +                               AT803X_DEBUG_TX_CLK_DLY_EN, 0);
  90 +       }
  91 +
  92         return 0;
  93  }
  94
  95 @@ -332,6 +368,8 @@ static int at803x_config_intr(struct phy
  96  static void at803x_link_change_notify(struct phy_device *phydev)
  97  {
  98         struct at803x_priv *priv = phydev->priv;
  99 +       struct at803x_platform_data *pdata;
 100 +       pdata = dev_get_platdata(&phydev->mdio.dev);
 101
 102         /*
 103          * Conduct a hardware reset for AT8030/2 every time a link loss is
 104 @@ -360,6 +398,24 @@ static void at803x_link_change_notify(st
 105         } else {
 106                 priv->phy_reset = false;
 107         }
 108 +       if (pdata && pdata->fixup_rgmii_tx_delay &&
 109 +           phydev->speed != priv->prev_speed) {
 110 +               switch (phydev->speed) {
 111 +               case SPEED_10:
 112 +               case SPEED_100:
 113 +                       at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_5, 0,
 114 +                               AT803X_DEBUG_TX_CLK_DLY_EN);
 115 +                       break;
 116 +               case SPEED_1000:
 117 +                       at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_5,
 118 +                               AT803X_DEBUG_TX_CLK_DLY_EN, 0);
 119 +                       break;
 120 +               default:
 121 +                       break;
 122 +               }
 123 +
 124 +               priv->prev_speed = phydev->speed;
 125 +       }
 126  }
 127
 128  static int at803x_aneg_done(struct phy_device *phydev)
 129 --- /dev/null
 130 +++ b/include/linux/platform_data/phy-at803x.h
 131 @@ -0,0 +1,11 @@
 132 +#ifndef _PHY_AT803X_PDATA_H
 133 +#define _PHY_AT803X_PDATA_H
 134 +
 135 +struct at803x_platform_data {
 136 +       int disable_smarteee:1;
 137 +       int enable_rgmii_tx_delay:1;
 138 +       int enable_rgmii_rx_delay:1;
 139 +       int fixup_rgmii_tx_delay:1;
 140 +};
 141 +
 142 +#endif /* _PHY_AT803X_PDATA_H */