kernel: Add support spi-nor, Eon EN25QH32
[openwrt/openwrt.git] / target / linux / generic / pending-4.14 / 831-ledtrig_netdev.patch
1 From: Alexey Brodkin <abrodkin@synopsys.com>
2 Subject: usb: Remove annoying warning about bogus URB
3
4 When ath9k-htc Wi-Fi dongle is used with generic OHCI controller
5 infinite stream of warnings appears in debug console like this:
6 -------------------------->8----------------------
7 usb 1-1: new full-speed USB device number 2 using ohci-platform
8 usb 1-1: ath9k_htc: Firmware ath9k_htc/htc_9271-1.4.0.fw requested
9 usb 1-1: ath9k_htc: Transferred FW: ath9k_htc/htc_9271-1.4.0.fw, size:
10 51008
11 ------------[ cut here ]------------
12 WARNING: CPU: 0 PID: 19 at drivers/usb/core/urb.c:449
13 usb_submit_urb+0x1b4/0x498()
14 usb 1-1: BOGUS urb xfer, pipe 1 != type 3
15 Modules linked in:
16 CPU: 0 PID: 19 Comm: kworker/0:1 Not tainted
17 4.4.0-rc4-00017-g00e2d79-dirty #3
18 Workqueue: events request_firmware_work_func
19
20 Stack Trace:
21 arc_unwind_core.constprop.1+0xa4/0x110
22 ---[ end trace 649ef8c342817fc2 ]---
23 ------------[ cut here ]------------
24 WARNING: CPU: 0 PID: 19 at drivers/usb/core/urb.c:449
25 usb_submit_urb+0x1b4/0x498()
26 usb 1-1: BOGUS urb xfer, pipe 1 != type 3
27 Modules linked in:
28 CPU: 0 PID: 19 Comm: kworker/0:1 Tainted: G W
29 4.4.0-rc4-00017-g00e2d79-dirty #3
30 Workqueue: events request_firmware_work_func
31
32 Stack Trace:
33 arc_unwind_core.constprop.1+0xa4/0x110
34 ---[ end trace 649ef8c342817fc3 ]---
35 ------------[ cut here ]------------
36 -------------------------->8----------------------
37
38 There're some discussions in mailing lists proposing to disable
39 that particular check alltogether and magically all seem to work
40 fine with muted warning.
41
42 Anyways new thread on that regard could be found here:
43 http://lists.infradead.org/pipermail/linux-snps-arc/2016-July/001310.html
44
45 Let's see what comes out of that new discussion, hopefully patching
46 of generic USB stuff won't be required then.
47
48 Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
49 ---
50 drivers/leds/Makefile | 1 +
51 drivers/leds/trigger/Kconfig | 7 +++++++
52 2 files changed, 8 insertions(+)
53
54 --- a/drivers/leds/Makefile
55 +++ b/drivers/leds/Makefile
56 @@ -82,3 +82,4 @@ obj-$(CONFIG_LEDS_USER) += uleds.o
57
58 # LED Triggers
59 obj-$(CONFIG_LEDS_TRIGGERS) += trigger/
60 +obj-$(CONFIG_LEDS_TRIGGER_NETDEV) += ledtrig-netdev.o
61 --- a/drivers/leds/trigger/Kconfig
62 +++ b/drivers/leds/trigger/Kconfig
63 @@ -126,4 +126,11 @@ config LEDS_TRIGGER_PANIC
64 a different trigger.
65 If unsure, say Y.
66
67 +config LEDS_TRIGGER_NETDEV
68 + tristate "LED Netdev Trigger"
69 + depends on NET && LEDS_TRIGGERS
70 + help
71 + This allows LEDs to be controlled by network device activity.
72 + If unsure, say Y.
73 +
74 endif # LEDS_TRIGGERS