0e5005ed1971e546edbb4fff5e7c3876a9578a18
[openwrt/openwrt.git] / target / linux / generic / pending-4.19 / 756-net-sfp-use-a-definition-for-the-fault-recovery-atte.patch
1 From 4d6bfb6fbb00af38402db4d1ce464e22def9fd9e Mon Sep 17 00:00:00 2001
2 From: Russell King <rmk+kernel@armlinux.org.uk>
3 Date: Thu, 28 Nov 2019 14:24:40 +0000
4 Subject: [PATCH 1/4] net: sfp: use a definition for the fault recovery
5 attempts
6
7 Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
8 ---
9 drivers/net/phy/sfp.c | 14 +++++++++++---
10 1 file changed, 11 insertions(+), 3 deletions(-)
11
12 --- a/drivers/net/phy/sfp.c
13 +++ b/drivers/net/phy/sfp.c
14 @@ -160,6 +160,14 @@ static const enum gpiod_flags gpio_flags
15 #define T_RESET_US 10
16 #define T_FAULT_RECOVER msecs_to_jiffies(1000)
17
18 +/* N_FAULT_INIT is the number of recovery attempts at module initialisation
19 + * time. If the TX_FAULT signal is not deasserted after this number of
20 + * attempts at clearing it, we decide that the module is faulty.
21 + * N_FAULT is the same but after the module has initialised.
22 + */
23 +#define N_FAULT_INIT 5
24 +#define N_FAULT 5
25 +
26 /* SFP module presence detection is poor: the three MOD DEF signals are
27 * the same length on the PCB, which means it's possible for MOD DEF 0 to
28 * connect before the I2C bus on MOD DEF 1/2.
29 @@ -1803,7 +1811,7 @@ static void sfp_sm_main(struct sfp *sfp,
30 sfp_module_tx_enable(sfp);
31
32 /* Initialise the fault clearance retries */
33 - sfp->sm_retries = 5;
34 + sfp->sm_retries = N_FAULT_INIT;
35
36 /* We need to check the TX_FAULT state, which is not defined
37 * while TX_DISABLE is asserted. The earliest we want to do
38 @@ -1842,7 +1850,7 @@ static void sfp_sm_main(struct sfp *sfp,
39 * there is a fault.
40 */
41 sfp_sm_fault(sfp, SFP_S_INIT_TX_FAULT,
42 - sfp->sm_retries == 5);
43 + sfp->sm_retries == N_FAULT_INIT);
44 } else if (event == SFP_E_TIMEOUT || event == SFP_E_TX_CLEAR) {
45 init_done: /* TX_FAULT deasserted or we timed out with TX_FAULT
46 * clear. Probe for the PHY and check the LOS state.
47 @@ -1855,7 +1863,7 @@ static void sfp_sm_main(struct sfp *sfp,
48 sfp_sm_link_check_los(sfp);
49
50 /* Reset the fault retry count */
51 - sfp->sm_retries = 5;
52 + sfp->sm_retries = N_FAULT;
53 }
54 break;
55