target/linux/generic/pending-4.4/078-0001-net-phy-update-Broadcom-drivers-to-v4.5.patch

   1 From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
   2 Subject: [PATCH 1/4] net: phy: update Broadcom drivers to v4.5
   3 MIME-Version: 1.0
   4 Content-Type: text/plain; charset=UTF-8
   5 Content-Transfer-Encoding: 8bit
   6
   7 Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
   8 ---
   9
  10 --- a/drivers/net/phy/bcm7xxx.c
  11 +++ b/drivers/net/phy/bcm7xxx.c
  12 @@ -250,10 +250,6 @@ static int bcm7xxx_config_init(struct ph
  13         phy_write(phydev, MII_BCM7XXX_AUX_MODE, MII_BCM7XX_64CLK_MDIO);
  14         phy_read(phydev, MII_BCM7XXX_AUX_MODE);
  15
  16 -       /* Workaround only required for 100Mbits/sec capable PHYs */
  17 -       if (phydev->supported & PHY_GBIT_FEATURES)
  18 -               return 0;
  19 -
  20         /* set shadow mode 2 */
  21         ret = phy_set_clr_bits(phydev, MII_BCM7XXX_TEST,
  22                         MII_BCM7XXX_SHD_MODE_2, MII_BCM7XXX_SHD_MODE_2);
  23 @@ -270,7 +266,7 @@ static int bcm7xxx_config_init(struct ph
  24         phy_write(phydev, MII_BCM7XXX_100TX_FALSE_CAR, 0x7555);
  25
  26         /* reset shadow mode 2 */
  27 -       ret = phy_set_clr_bits(phydev, MII_BCM7XXX_TEST, MII_BCM7XXX_SHD_MODE_2, 0);
  28 +       ret = phy_set_clr_bits(phydev, MII_BCM7XXX_TEST, 0, MII_BCM7XXX_SHD_MODE_2);
  29         if (ret < 0)
  30                 return ret;
  31
  32 @@ -307,11 +303,6 @@ static int bcm7xxx_suspend(struct phy_de
  33         return 0;
  34  }
  35
  36 -static int bcm7xxx_dummy_config_init(struct phy_device *phydev)
  37 -{
  38 -       return 0;
  39 -}
  40 -
  41  #define BCM7XXX_28NM_GPHY(_oui, _name)                                 \
  42  {                                                                      \
  43         .phy_id         = (_oui),                                       \
  44 @@ -338,7 +329,7 @@ static struct phy_driver bcm7xxx_driver[
  45         .phy_id         = PHY_ID_BCM7425,
  46         .phy_id_mask    = 0xfffffff0,
  47         .name           = "Broadcom BCM7425",
  48 -       .features       = PHY_GBIT_FEATURES |
  49 +       .features       = PHY_BASIC_FEATURES |
  50                           SUPPORTED_Pause | SUPPORTED_Asym_Pause,
  51         .flags          = PHY_IS_INTERNAL,
  52         .config_init    = bcm7xxx_config_init,
  53 @@ -351,7 +342,7 @@ static struct phy_driver bcm7xxx_driver[
  54         .phy_id         = PHY_ID_BCM7429,
  55         .phy_id_mask    = 0xfffffff0,
  56         .name           = "Broadcom BCM7429",
  57 -       .features       = PHY_GBIT_FEATURES |
  58 +       .features       = PHY_BASIC_FEATURES |
  59                           SUPPORTED_Pause | SUPPORTED_Asym_Pause,
  60         .flags          = PHY_IS_INTERNAL,
  61         .config_init    = bcm7xxx_config_init,
  62 @@ -361,31 +352,18 @@ static struct phy_driver bcm7xxx_driver[
  63         .resume         = bcm7xxx_config_init,
  64         .driver         = { .owner = THIS_MODULE },
  65  }, {
  66 -       .phy_id         = PHY_BCM_OUI_4,
  67 -       .phy_id_mask    = 0xffff0000,
  68 -       .name           = "Broadcom BCM7XXX 40nm",
  69 -       .features       = PHY_GBIT_FEATURES |
  70 -                         SUPPORTED_Pause | SUPPORTED_Asym_Pause,
  71 -       .flags          = PHY_IS_INTERNAL,
  72 -       .config_init    = bcm7xxx_config_init,
  73 -       .config_aneg    = genphy_config_aneg,
  74 -       .read_status    = genphy_read_status,
  75 -       .suspend        = bcm7xxx_suspend,
  76 -       .resume         = bcm7xxx_config_init,
  77 -       .driver         = { .owner = THIS_MODULE },
  78 -}, {
  79 -       .phy_id         = PHY_BCM_OUI_5,
  80 -       .phy_id_mask    = 0xffffff00,
  81 -       .name           = "Broadcom BCM7XXX 65nm",
  82 -       .features       = PHY_BASIC_FEATURES |
  83 +       .phy_id         = PHY_ID_BCM7435,
  84 +       .phy_id_mask    = 0xfffffff0,
  85 +       .name           = "Broadcom BCM7435",
  86 +       .features       = PHY_BASIC_FEATURES |
  87                           SUPPORTED_Pause | SUPPORTED_Asym_Pause,
  88 -       .flags          = PHY_IS_INTERNAL,
  89 -       .config_init    = bcm7xxx_dummy_config_init,
  90 -       .config_aneg    = genphy_config_aneg,
  91 -       .read_status    = genphy_read_status,
  92 -       .suspend        = bcm7xxx_suspend,
  93 -       .resume         = bcm7xxx_config_init,
  94 -       .driver         = { .owner = THIS_MODULE },
  95 +       .flags          = PHY_IS_INTERNAL,
  96 +       .config_init    = bcm7xxx_config_init,
  97 +       .config_aneg    = genphy_config_aneg,
  98 +       .read_status    = genphy_read_status,
  99 +       .suspend        = bcm7xxx_suspend,
 100 +       .resume         = bcm7xxx_config_init,
 101 +       .driver         = { .owner = THIS_MODULE },
 102  } };
 103
 104  static struct mdio_device_id __maybe_unused bcm7xxx_tbl[] = {
 105 @@ -395,9 +373,8 @@ static struct mdio_device_id __maybe_unu
 106         { PHY_ID_BCM7425, 0xfffffff0, },
 107         { PHY_ID_BCM7429, 0xfffffff0, },
 108         { PHY_ID_BCM7439, 0xfffffff0, },
 109 +       { PHY_ID_BCM7435, 0xfffffff0, },
 110         { PHY_ID_BCM7445, 0xfffffff0, },
 111 -       { PHY_BCM_OUI_4, 0xffff0000 },
 112 -       { PHY_BCM_OUI_5, 0xffffff00 },
 113         { }
 114  };
 115
 116 --- a/include/linux/brcmphy.h
 117 +++ b/include/linux/brcmphy.h
 118 @@ -26,6 +26,7 @@
 119  #define PHY_ID_BCM7366                 0x600d8490
 120  #define PHY_ID_BCM7425                 0x600d86b0
 121  #define PHY_ID_BCM7429                 0x600d8730
 122 +#define PHY_ID_BCM7435                 0x600d8750
 123  #define PHY_ID_BCM7439                 0x600d8480
 124  #define PHY_ID_BCM7439_2               0xae025080
 125  #define PHY_ID_BCM7445                 0x600d8510