mpc85xx: fix address config for ws-ap3825i
[openwrt/openwrt.git] / target / linux / generic / pending-5.4 / 761-net-dsa-mt7530-Support-EEE-features.patch
1 From 9cfb2d426c38272f245e9e6f62b3552d1ed5852b Mon Sep 17 00:00:00 2001
2 From: =?UTF-8?q?Ren=C3=A9=20van=20Dorst?= <opensource@vdorst.com>
3 Date: Tue, 21 Apr 2020 00:18:08 +0200
4 Subject: [PATCH] net: dsa: mt7530: Support EEE features
5 MIME-Version: 1.0
6 Content-Type: text/plain; charset=UTF-8
7 Content-Transfer-Encoding: 8bit
8
9 Signed-off-by: René van Dorst <opensource@vdorst.com>
10 --- a/drivers/net/dsa/mt7530.c
11 +++ b/drivers/net/dsa/mt7530.c
12 @@ -1419,9 +1419,13 @@ static void mt7530_phylink_mac_config(st
13 switch (state->speed) {
14 case SPEED_1000:
15 mcr_new |= PMCR_FORCE_SPEED_1000;
16 + if (priv->eee_enable & BIT(port))
17 + mcr_new |= PMCR_FORCE_EEE1G;
18 break;
19 case SPEED_100:
20 mcr_new |= PMCR_FORCE_SPEED_100;
21 + if (priv->eee_enable & BIT(port))
22 + mcr_new |= PMCR_FORCE_EEE100;
23 break;
24 }
25 if (state->duplex == DUPLEX_FULL) {
26 @@ -1557,6 +1561,54 @@ mt7530_phylink_mac_link_state(struct dsa
27 return 1;
28 }
29
30 +static int mt7530_get_mac_eee(struct dsa_switch *ds, int port,
31 + struct ethtool_eee *e)
32 +{
33 + struct mt7530_priv *priv = ds->priv;
34 + u32 eeecr, pmsr;
35 +
36 + e->eee_enabled = !!(priv->eee_enable & BIT(port));
37 +
38 + if (e->eee_enabled) {
39 + eeecr = mt7530_read(priv, MT7530_PMEEECR_P(port));
40 + e->tx_lpi_enabled = !(eeecr & LPI_MODE_EN);
41 + e->tx_lpi_timer = (eeecr >> 4) & 0xFFF;
42 + pmsr = mt7530_read(priv, MT7530_PMSR_P(port));
43 + e->eee_active = e->eee_enabled && !!(pmsr & PMSR_EEE1G);
44 + } else {
45 + e->tx_lpi_enabled = 0;
46 + e->tx_lpi_timer = 0;
47 + e->eee_active = 0;
48 + }
49 +
50 + return 0;
51 +}
52 +
53 +static int mt7530_set_mac_eee(struct dsa_switch *ds, int port,
54 + struct ethtool_eee *e)
55 +{
56 + struct mt7530_priv *priv = ds->priv;
57 + u32 eeecr;
58 +
59 + if (e->tx_lpi_enabled && e->tx_lpi_timer > 0xFFF)
60 + return -EINVAL;
61 +
62 + if (e->eee_enabled) {
63 + priv->eee_enable |= BIT(port);
64 + //MT7530_PMEEECR_P
65 + eeecr = mt7530_read(priv, MT7530_PMEEECR_P(port));
66 + eeecr &= 0xFFFF0000;
67 + if (!e->tx_lpi_enabled)
68 + eeecr |= LPI_MODE_EN;
69 + eeecr = LPI_THRESH(e->tx_lpi_timer);
70 + mt7530_write(priv, MT7530_PMEEECR_P(port), eeecr);
71 + } else {
72 + priv->eee_enable &= ~(BIT(port));
73 + }
74 +
75 + return 0;
76 +}
77 +
78 static const struct dsa_switch_ops mt7530_switch_ops = {
79 .get_tag_protocol = mtk_get_tag_protocol,
80 .setup = mt7530_setup,
81 @@ -1584,6 +1636,8 @@ static const struct dsa_switch_ops mt753
82 .phylink_mac_config = mt7530_phylink_mac_config,
83 .phylink_mac_link_down = mt7530_phylink_mac_link_down,
84 .phylink_mac_link_up = mt7530_phylink_mac_link_up,
85 + .get_mac_eee = mt7530_get_mac_eee,
86 + .set_mac_eee = mt7530_set_mac_eee,
87 };
88
89 static const struct of_device_id mt7530_of_match[] = {
90 --- a/drivers/net/dsa/mt7530.h
91 +++ b/drivers/net/dsa/mt7530.h
92 @@ -212,6 +212,8 @@ enum mt7530_vlan_port_attr {
93 #define PMCR_RX_EN BIT(13)
94 #define PMCR_BACKOFF_EN BIT(9)
95 #define PMCR_BACKPR_EN BIT(8)
96 +#define PMCR_FORCE_EEE1G BIT(7)
97 +#define PMCR_FORCE_EEE100 BIT(6)
98 #define PMCR_TX_FC_EN BIT(5)
99 #define PMCR_RX_FC_EN BIT(4)
100 #define PMCR_FORCE_SPEED_1000 BIT(3)
101 @@ -233,6 +235,12 @@ enum mt7530_vlan_port_attr {
102 #define PMSR_DPX BIT(1)
103 #define PMSR_LINK BIT(0)
104
105 +#define MT7530_PMEEECR_P(x) (0x3004 + (x) * 0x100)
106 +#define WAKEUP_TIME_1000(x) ((x & 0xFF) << 24)
107 +#define WAKEUP_TIME_100(x) ((x & 0xFF) << 16)
108 +#define LPI_THRESH(x) ((x & 0xFFF) << 4)
109 +#define LPI_MODE_EN BIT(0)
110 +
111 /* Register for MIB */
112 #define MT7530_PORT_MIB_COUNTER(x) (0x4000 + (x) * 0x100)
113 #define MT7530_MIB_CCR 0x4fe0
114 @@ -471,6 +479,7 @@ struct mt7530_priv {
115 unsigned int p5_intf_sel;
116 u8 mirror_rx;
117 u8 mirror_tx;
118 + u8 eee_enable;
119
120 struct mt7530_port ports[MT7530_NUM_PORTS];
121 /* protect among processes for registers access*/