target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata

   1 #!/bin/sh
   2
   3 [ -e /lib/firmware/$FIRMWARE ] && exit 0
   4
   5 . /lib/functions/caldata.sh
   6
   7 board=$(board_name)
   8
   9 case "$FIRMWARE" in
  10 "ath10k/cal-pci-0000:01:00.0.bin")
  11         case "$board" in
  12         meraki,mr33)
  13                 caldata_extract_ubi "ART" 0x9000 0x844
  14                 caldata_valid "4408" || caldata_extract "ART" 0x9000 0x844
  15                 ath10k_patch_mac $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) +1)
  16                 ;;
  17         esac
  18         ;;
  19 "ath10k/pre-cal-pci-0000:01:00.0.bin")
  20         case "$board" in
  21         asus,map-ac2200)
  22                 caldata_extract_ubi "Factory" 0x9000 0x2f20
  23                 ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
  24                         /lib/firmware/ath10k/QCA9888/hw2.0/board.bin
  25                 ;;
  26         avm,fritzrepeater-3000)
  27                 /usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
  28                 /usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
  29                 /usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
  30                 /usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
  31                 /usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
  32                 /usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1")
  33                 ;;
  34         linksys,ea8300)
  35                 caldata_extract "ART" 0x9000 0x2f20
  36                 # OEM assigns 4 sequential MACs
  37                 ath10k_patch_mac $(macaddr_setbit_la $(macaddr_add "$(cat /sys/class/net/eth0/address)" 4))
  38                 ;;
  39         openmesh,a62)
  40                 caldata_extract "0:ART" 0x9000 0x2f20
  41                 ;;
  42         esac
  43         ;;
  44 "ath10k/pre-cal-ahb-a000000.wifi.bin")
  45         case "$board" in
  46         8dev,jalapeno |\
  47         alfa-network,ap120c-ac |\
  48         cilab,meshpoint-one |\
  49         glinet,gl-b1300 |\
  50         linksys,ea6350v3 |\
  51         qcom,ap-dk01.1-c1)
  52                 caldata_extract "ART" 0x1000 0x2f20
  53                 ;;
  54         aruba,ap-303)
  55                 caldata_extract "ART" 0x1000 0x2f20
  56                 ath10k_patch_mac $(mtd_get_mac_binary mfginfo 0x1D)
  57                 ;;
  58         asus,map-ac2200)
  59                 caldata_extract_ubi "Factory" 0x1000 0x2f20
  60                 ;;
  61         asus,rt-ac58u)
  62                 CI_UBIPART=UBI_DEV
  63                 caldata_extract_ubi "Factory" 0x1000 0x2f20
  64                 ;;
  65         avm,fritzbox-4040)
  66                 /usr/bin/fritz_cal_extract -i 1 -s 0x400 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader_config")
  67                 ;;
  68         avm,fritzbox-7530 |\
  69         avm,fritzrepeater-1200 |\
  70         avm,fritzrepeater-3000)
  71                 /usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
  72                 /usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
  73                 /usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
  74                 /usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
  75                 /usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
  76                 /usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1")
  77                 ;;
  78         compex,wpj419 |\
  79         compex,wpj428 |\
  80         engenius,eap1300 |\
  81         openmesh,a42 |\
  82         openmesh,a62 |\
  83         qxwlan,e2600ac-c1 |\
  84         qxwlan,e2600ac-c2 |\
  85         unielec,u4019-32m)
  86                 caldata_extract "0:ART" 0x1000 0x2f20
  87                 ;;
  88         engenius,ens620ext)
  89                 caldata_extract "ART" 0x1000 0x2f20
  90                 ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +2)
  91                 ;;
  92         linksys,ea8300)
  93                 caldata_extract "ART" 0x1000 0x2f20
  94                 ath10k_patch_mac $(macaddr_add "$(cat /sys/class/net/eth0/address)" 2)
  95                 ;;
  96         meraki,mr33)
  97                 caldata_extract_ubi "ART" 0x1000 0x2f20
  98                 caldata_valid "202f" || caldata_extract "ART" 0x1000 0x2f20
  99                 ath10k_patch_mac $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) +2)
 100                 ;;
 101         netgear,ex6100v2 |\
 102         netgear,ex6150v2)
 103                 caldata_extract "ART" 0x1000 0x2f20
 104                 ath10k_patch_mac $(mtd_get_mac_binary dnidata 0x0)
 105                 ;;
 106         zyxel,nbg6617 |\
 107         zyxel,wre6606)
 108                 caldata_extract "ART" 0x1000 0x2f20
 109                 ath10k_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -2)
 110                 ;;
 111         esac
 112         ;;
 113 "ath10k/pre-cal-ahb-a800000.wifi.bin")
 114         case "$board" in
 115         8dev,jalapeno |\
 116         alfa-network,ap120c-ac |\
 117         cilab,meshpoint-one |\
 118         glinet,gl-b1300 |\
 119         linksys,ea6350v3 |\
 120         qcom,ap-dk01.1-c1)
 121                 caldata_extract "ART" 0x5000 0x2f20
 122                 ;;
 123         aruba,ap-303)
 124                 caldata_extract "ART" 0x5000 0x2f20
 125                 ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary mfginfo 0x1D) +1)
 126                 ;;
 127         asus,map-ac2200)
 128                 caldata_extract_ubi "Factory" 0x5000 0x2f20
 129                 ;;
 130         asus,rt-ac58u)
 131                 CI_UBIPART=UBI_DEV
 132                 caldata_extract_ubi "Factory" 0x5000 0x2f20
 133                 ;;
 134         avm,fritzbox-4040)
 135                 /usr/bin/fritz_cal_extract -i 1 -s 0x400 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader_config")
 136                 ;;
 137         avm,fritzbox-7530 |\
 138         avm,fritzrepeater-1200 |\
 139         avm,fritzrepeater-3000)
 140                 /usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
 141                 /usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
 142                 /usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
 143                 /usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
 144                 /usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
 145                 /usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1")
 146                 ;;
 147         compex,wpj419 |\
 148         compex,wpj428 |\
 149         engenius,eap1300 |\
 150         openmesh,a42 |\
 151         openmesh,a62 |\
 152         qxwlan,e2600ac-c1 |\
 153         qxwlan,e2600ac-c2 |\
 154         unielec,u4019-32m)
 155                 caldata_extract "0:ART" 0x5000 0x2f20
 156                 ;;
 157         engenius,ens620ext)
 158                 caldata_extract "ART" 0x5000 0x2f20
 159                 ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +3)
 160                 ;;
 161         linksys,ea8300)
 162                 caldata_extract "ART" 0x5000 0x2f20
 163                 ath10k_patch_mac $(macaddr_add "$(cat /sys/class/net/eth0/address)" 3)
 164                 ;;
 165         meraki,mr33)
 166                 caldata_extract_ubi "ART" 0x5000 0x2f20
 167                 caldata_valid "202f" || caldata_extract "ART" 0x5000 0x2f20
 168                 ath10k_patch_mac $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) +3)
 169                 ;;
 170         netgear,ex6100v2 |\
 171         netgear,ex6150v2)
 172                 caldata_extract "ART" 0x5000 0x2f20
 173                 ath10k_patch_mac $(mtd_get_mac_binary dnidata 0xc)
 174                 ;;
 175         zyxel,nbg6617 |\
 176         zyxel,wre6606)
 177                 caldata_extract "ART" 0x5000 0x2f20
 178                 ath10k_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -1)
 179                 ;;
 180         esac
 181         ;;
 182 *)
 183         exit 1
 184         ;;
 185 esac