target/linux/ipq40xx/base-files/lib/upgrade/platform.sh

   1 PART_NAME=firmware
   2 REQUIRE_IMAGE_METADATA=1
   3
   4 RAMFS_COPY_BIN='fw_printenv fw_setenv'
   5 RAMFS_COPY_DATA='/etc/fw_env.config /var/lock/fw_printenv.lock'
   6
   7 platform_check_image() {
   8         case "$(board_name)" in
   9         asus,rt-ac58u)
  10                 CI_UBIPART="UBI_DEV"
  11                 local ubidev=$(nand_find_ubi $CI_UBIPART)
  12                 local asus_root=$(nand_find_volume $ubidev jffs2)
  13
  14                 [ -n "$asus_root" ] || return 0
  15
  16                 cat << EOF
  17 jffs2 partition is still present.
  18 There's probably no space left
  19 to install the filesystem.
  20
  21 You need to delete the jffs2 partition first:
  22 # ubirmvol /dev/ubi0 --name=jffs2
  23
  24 Once this is done. Retry.
  25 EOF
  26                 return 1
  27                 ;;
  28         esac
  29         return 0;
  30 }
  31
  32 askey_do_upgrade() {
  33         local tar_file="$1"
  34
  35         local board_dir=$(tar tf $tar_file | grep -m 1 '^sysupgrade-.*/$')
  36         board_dir=${board_dir%/}
  37
  38         tar Oxf $tar_file ${board_dir}/root | mtd write - rootfs
  39
  40         nand_do_upgrade "$1"
  41 }
  42
  43 zyxel_do_upgrade() {
  44         local tar_file="$1"
  45
  46         local board_dir=$(tar tf $tar_file | grep -m 1 '^sysupgrade-.*/$')
  47         board_dir=${board_dir%/}
  48
  49         tar Oxf $tar_file ${board_dir}/kernel | mtd write - kernel
  50
  51         if [ -n "$UPGRADE_BACKUP" ]; then
  52                 tar Oxf $tar_file ${board_dir}/root | mtd -j "$UPGRADE_BACKUP" write - rootfs
  53         else
  54                 tar Oxf $tar_file ${board_dir}/root | mtd write - rootfs
  55         fi
  56 }
  57
  58 platform_do_upgrade_mikrotik_nand() {
  59         local fw_mtd=$(find_mtd_part kernel)
  60         fw_mtd="${fw_mtd/block/}"
  61         [ -n "$fw_mtd" ] || return
  62
  63         local board_dir=$(tar tf "$1" | grep -m 1 '^sysupgrade-.*/$')
  64         board_dir=${board_dir%/}
  65         [ -n "$board_dir" ] || return
  66
  67         local kernel_len=$(tar xf "$1" ${board_dir}/kernel -O | wc -c)
  68         [ -n "$kernel_len" ] || return
  69
  70         tar xf "$1" ${board_dir}/kernel -O | ubiformat "$fw_mtd" -y -S $kernel_len -f -
  71
  72         CI_KERNPART="none"
  73         nand_do_upgrade "$1"
  74 }
  75
  76 platform_do_upgrade() {
  77         case "$(board_name)" in
  78         8dev,jalapeno |\
  79         aruba,ap-303 |\
  80         aruba,ap-303h |\
  81         aruba,ap-365 |\
  82         avm,fritzbox-7530 |\
  83         avm,fritzrepeater-1200 |\
  84         avm,fritzrepeater-3000 |\
  85         buffalo,wtr-m2133hp |\
  86         cilab,meshpoint-one |\
  87         edgecore,ecw5211 |\
  88         edgecore,oap100 |\
  89         engenius,eap2200 |\
  90         glinet,gl-ap1300 |\
  91         luma,wrtq-329acn |\
  92         mobipromo,cm520-79f |\
  93         netgear,wac510 |\
  94         p2w,r619ac-64m |\
  95         p2w,r619ac-128m |\
  96         qxwlan,e2600ac-c2)
  97                 nand_do_upgrade "$1"
  98                 ;;
  99         alfa-network,ap120c-ac)
 100                 part="$(awk -F 'ubi.mtd=' '{printf $2}' /proc/cmdline | sed -e 's/ .*$//')"
 101                 if [ "$part" = "rootfs1" ]; then
 102                         fw_setenv active 2 || exit 1
 103                         CI_UBIPART="rootfs2"
 104                 else
 105                         fw_setenv active 1 || exit 1
 106                         CI_UBIPART="rootfs1"
 107                 fi
 108                 nand_do_upgrade "$1"
 109                 ;;
 110         asus,map-ac2200)
 111                 CI_KERNPART="linux"
 112                 nand_do_upgrade "$1"
 113                 ;;
 114         asus,rt-ac58u)
 115                 CI_UBIPART="UBI_DEV"
 116                 CI_KERNPART="linux"
 117                 nand_do_upgrade "$1"
 118                 ;;
 119         cellc,rtl30vw)
 120                 CI_UBIPART="ubifs"
 121                 askey_do_upgrade "$1"
 122                 ;;
 123         compex,wpj419)
 124                 nand_do_upgrade "$1"
 125                 ;;
 126         linksys,ea6350v3 |\
 127         linksys,ea8300 |\
 128         linksys,mr8300)
 129                 platform_do_upgrade_linksys "$1"
 130                 ;;
 131         meraki,mr33)
 132                 CI_KERNPART="part.safe"
 133                 nand_do_upgrade "$1"
 134                 ;;
 135         mikrotik,hap-ac2|\
 136         mikrotik,sxtsq-5-ac)
 137                 [ "$(rootfs_type)" = "tmpfs" ] && mtd erase firmware
 138                 default_do_upgrade "$1"
 139                 ;;
 140         mikrotik,hap-ac3)
 141                 platform_do_upgrade_mikrotik_nand "$1"
 142                 ;;
 143         netgear,rbr50 |\
 144         netgear,rbs50 |\
 145         netgear,srr60 |\
 146         netgear,srs60)
 147                 platform_do_upgrade_netgear_orbi_upgrade "$1"
 148                 ;;
 149         openmesh,a42 |\
 150         openmesh,a62 |\
 151         plasmacloud,pa1200 |\
 152         plasmacloud,pa2200)
 153                 PART_NAME="inactive"
 154                 platform_do_upgrade_dualboot_datachk "$1"
 155                 ;;
 156         teltonika,rutx10)
 157                 CI_UBIPART="rootfs"
 158                 nand_do_upgrade "$1"
 159                 ;;
 160         zyxel,nbg6617)
 161                 zyxel_do_upgrade "$1"
 162                 ;;
 163         *)
 164                 default_do_upgrade "$1"
 165                 ;;
 166         esac
 167 }