ipq40xx: drop bus driver, its a no-op and only does lots of alloc/free
[openwrt/openwrt.git] / target / linux / ipq40xx / files-4.14 / arch / arm / boot / dts / qcom-ipq4018-jalapeno.dts
1 /* Copyright (c) 2015, The Linux Foundation. All rights reserved.
2 * Copyright (c) 2018, Robert Marko <robimarko@gmail.com>
3 *
4 * Permission to use, copy, modify, and/or distribute this software for any
5 * purpose with or without fee is hereby granted, provided that the above
6 * copyright notice and this permission notice appear in all copies.
7 *
8 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
9 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
10 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
11 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
12 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
13 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
14 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
15 *
16 */
17
18 #include "qcom-ipq4019.dtsi"
19 #include <dt-bindings/gpio/gpio.h>
20 #include <dt-bindings/input/input.h>
21 #include <dt-bindings/soc/qcom,tcsr.h>
22
23 / {
24 model = "8devices Jalapeno";
25 compatible = "8dev,jalapeno", "qcom,ipq4019";
26
27 soc {
28 mdio@90000 {
29 status = "okay";
30 pinctrl-0 = <&mdio_pins>;
31 pinctrl-names = "default";
32 };
33
34 ess-psgmii@98000 {
35 status = "okay";
36 };
37
38 counter@4a1000 {
39 compatible = "qcom,qca-gcnt";
40 reg = <0x4a1000 0x4>;
41 };
42
43 tcsr@1949000 {
44 compatible = "qcom,tcsr";
45 reg = <0x1949000 0x100>;
46 qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
47 };
48
49 tcsr@194b000 {
50 /* select hostmode */
51 compatible = "qcom,tcsr";
52 reg = <0x194b000 0x100>;
53 qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
54 status = "okay";
55 };
56
57 ess_tcsr@1953000 {
58 compatible = "qcom,tcsr";
59 reg = <0x1953000 0x1000>;
60 qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
61 };
62
63 tcsr@1957000 {
64 compatible = "qcom,tcsr";
65 reg = <0x1957000 0x100>;
66 qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
67 };
68
69 usb2: usb2@60f8800 {
70 status = "okay";
71 };
72
73 serial@78af000 {
74 pinctrl-0 = <&serial_pins>;
75 pinctrl-names = "default";
76 status = "okay";
77 };
78
79 usb3: usb3@8af8800 {
80 status = "okay";
81 };
82
83 crypto@8e3a000 {
84 status = "okay";
85 };
86
87 watchdog@b017000 {
88 status = "okay";
89 };
90
91 ess-switch@c000000 {
92 status = "okay";
93 switch_lan_bmp = <0x10>; /* lan port bitmap */
94 };
95
96 edma@c080000 {
97 status = "okay";
98 };
99 };
100 };
101
102 &tlmm {
103 mdio_pins: mdio_pinmux {
104 pinmux_1 {
105 pins = "gpio53";
106 function = "mdio";
107 };
108 pinmux_2 {
109 pins = "gpio52";
110 function = "mdc";
111 };
112 pinconf {
113 pins = "gpio52", "gpio53";
114 bias-pull-up;
115 };
116 };
117
118 serial_pins: serial_pinmux {
119 mux {
120 pins = "gpio60", "gpio61";
121 function = "blsp_uart0";
122 bias-disable;
123 };
124 };
125
126 spi_0_pins: spi_0_pinmux {
127 pin {
128 function = "blsp_spi0";
129 pins = "gpio55", "gpio56", "gpio57";
130 drive-strength = <2>;
131 bias-disable;
132 };
133 pin_cs {
134 function = "gpio";
135 pins = "gpio54", "gpio59";
136 drive-strength = <2>;
137 bias-disable;
138 output-high;
139 };
140 };
141 };
142
143 &blsp_dma {
144 status = "okay";
145 };
146
147 &spi_0 {
148 pinctrl-0 = <&spi_0_pins>;
149 pinctrl-names = "default";
150 cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>, <&tlmm 59 GPIO_ACTIVE_HIGH>;
151 status = "okay";
152
153 m25p80@0 {
154 #address-cells = <1>;
155 #size-cells = <0>;
156 reg = <0>;
157 compatible = "jedec,spi-nor";
158 spi-max-frequency = <24000000>;
159
160 partitions {
161 compatible = "fixed-partitions";
162 #address-cells = <1>;
163 #size-cells = <1>;
164
165 partition0@0 {
166 label = "SBL1";
167 reg = <0x00000000 0x00040000>;
168 read-only;
169 };
170 partition1@40000 {
171 label = "MIBIB";
172 reg = <0x00040000 0x00020000>;
173 read-only;
174 };
175 partition2@60000 {
176 label = "QSEE";
177 reg = <0x00060000 0x00060000>;
178 read-only;
179 };
180 partition3@c0000 {
181 label = "CDT";
182 reg = <0x000c0000 0x00010000>;
183 read-only;
184 };
185 partition4@d0000 {
186 label = "DDRPARAMS";
187 reg = <0x000d0000 0x00010000>;
188 read-only;
189 };
190 partition5@e0000 {
191 label = "APPSBLENV"; /* uboot env*/
192 reg = <0x000e0000 0x00010000>;
193 read-only;
194 };
195 partition5@f0000 {
196 label = "APPSBL"; /* uboot */
197 reg = <0x000f0000 0x00080000>;
198 read-only;
199 };
200 partition5@170000 {
201 label = "ART";
202 reg = <0x00170000 0x00010000>;
203 read-only;
204 };
205 };
206 };
207
208 mt29f@1 {
209 status = "okay";
210 #address-cells = <1>;
211 #size-cells = <0>;
212 compatible = "spinand,mt29f", "w25n01gv";
213 reg = <1>;
214 spi-max-frequency = <24000000>;
215 partitions {
216 compatible = "fixed-partitions";
217 #address-cells = <1>;
218 #size-cells = <1>;
219
220 partition0@0 {
221 label = "ubi";
222 reg = <0x00000000 0x08000000>;
223 };
224 };
225 };
226 };
227
228 &cryptobam {
229 status = "okay";
230 };
231
232 &gmac0 {
233 qcom,poll_required = <1>;
234 qcom,poll_required_dynamic = <1>;
235 qcom,phy_mdio_addr = <3>;
236 vlan_tag = <1 0x10>;
237 };
238
239 &gmac1 {
240 qcom,poll_required = <1>;
241 qcom,poll_required_dynamic = <1>;
242 qcom,phy_mdio_addr = <4>;
243 vlan_tag = <2 0x20>;
244 };
245
246 &wifi0 {
247 status = "okay";
248 qcom,ath10k-calibration-variant = "8devices-Jalapeno";
249 };
250
251 &wifi1 {
252 status = "okay";
253 qcom,ath10k-calibration-variant = "8devices-Jalapeno";
254 };
255
256 &usb3_ss_phy {
257 status = "okay";
258 };
259
260 &usb3_hs_phy {
261 status = "okay";
262 };
263
264 &usb2_hs_phy {
265 status = "okay";
266 };