target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4019-fritz4040.dts

   1 /* Copyright (c) 2015, The Linux Foundation. All rights reserved.
   2  *
   3  * Permission to use, copy, modify, and/or distribute this software for any
   4  * purpose with or without fee is hereby granted, provided that the above
   5  * copyright notice and this permission notice appear in all copies.
   6  *
   7  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
   8  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
   9  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
  10  * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
  11  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
  12  * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
  13  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  14  *
  15  */
  16
  17 #include "qcom-ipq4019.dtsi"
  18 #include "qcom-ipq4019-bus.dtsi"
  19 #include <dt-bindings/gpio/gpio.h>
  20 #include <dt-bindings/input/input.h>
  21 #include <dt-bindings/soc/qcom,tcsr.h>
  22
  23 / {
  24         model = "AVM FRITZ!Box 4040";
  25         compatible = "avm,fritzbox-4040", "qcom,ipq4019";
  26
  27         aliases {
  28                 led-boot = &power;
  29                 led-failsafe = &flash;
  30                 led-running = &power;
  31                 led-upgrade = &flash;
  32         };
  33
  34         reserved-memory {
  35                 #address-cells = <0x1>;
  36                 #size-cells = <0x1>;
  37                 ranges;
  38
  39                 tz_apps@87b80000 {
  40                         reg = <0x87b80000 0x280000>;
  41                         reusable;
  42                 };
  43
  44                 smem@87e00000 {
  45                         reg = <0x87e00000 0x080000>;
  46                         no-map;
  47                 };
  48
  49                 tz@87e80000 {
  50                         reg = <0x87e80000 0x180000>;
  51                         no-map;
  52                 };
  53         };
  54
  55         soc {
  56                 mdio@90000 {
  57                         status = "okay";
  58                 };
  59
  60                 ess-psgmii@98000 {
  61                         status = "okay";
  62                 };
  63
  64                 tcsr@1949000 {
  65                         compatible = "qcom,tcsr";
  66                         reg = <0x1949000 0x100>;
  67                         qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
  68                 };
  69
  70                 tcsr@194b000 {
  71                         compatible = "qcom,tcsr";
  72                         reg = <0x194b000 0x100>;
  73                         qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
  74                 };
  75
  76                 ess_tcsr@1953000 {
  77                         compatible = "qcom,tcsr";
  78                         reg = <0x1953000 0x1000>;
  79                         qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
  80                 };
  81
  82                 tcsr@1957000 {
  83                         compatible = "qcom,tcsr";
  84                         reg = <0x1957000 0x100>;
  85                         qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
  86                 };
  87
  88                 usb2@60f8800 {
  89                         status = "okay";
  90                 };
  91
  92                 serial@78af000 {
  93                         pinctrl-0 = <&serial_pins>;
  94                         pinctrl-names = "default";
  95                         status = "okay";
  96                 };
  97
  98                 usb3@8af8800 {
  99                         status = "okay";
 100                 };
 101
 102                 crypto@8e3a000 {
 103                         status = "okay";
 104                 };
 105
 106                 wifi@a000000 {
 107                         status = "okay";
 108                 };
 109
 110                 wifi@a800000 {
 111                         status = "okay";
 112                 };
 113
 114                 watchdog@b017000 {
 115                         status = "okay";
 116                 };
 117
 118                 qca8075: ess-switch@c000000 {
 119                         status = "okay";
 120
 121                         #gpio-cells = <2>;
 122                         gpio-controller;
 123
 124                         enable-usb-power {
 125                                 gpio-hog;
 126                                 line-name = "enable USB3 power";
 127                                 gpios = <7 GPIO_ACTIVE_HIGH>;
 128                                 output-high;
 129                         };
 130                 };
 131
 132                 edma@c080000 {
 133                         status = "okay";
 134                 };
 135         };
 136
 137         gpio-keys {
 138                 compatible = "gpio-keys";
 139
 140                 wlan {
 141                         label = "wlan";
 142                         gpios = <&tlmm 58 GPIO_ACTIVE_LOW>;
 143                         linux,code = <KEY_RFKILL>;
 144                 };
 145
 146                 wps {
 147                         label = "wps";
 148                         gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
 149                         linux,code = <KEY_WPS_BUTTON>;
 150                 };
 151         };
 152
 153         gpio-leds {
 154                 compatible = "gpio-leds";
 155
 156                 wlan {
 157                         label = "fritz4040:green:wlan";
 158                         gpios = <&qca8075 1 GPIO_ACTIVE_HIGH>;
 159                 };
 160
 161                 panic: info_red {
 162                         label = "fritz4040:red:info";
 163                         gpios = <&qca8075 3 GPIO_ACTIVE_HIGH>;
 164                         panic-indicator;
 165                 };
 166
 167                 wan {
 168                         label = "fritz4040:green:wan";
 169                         gpios = <&qca8075 5 GPIO_ACTIVE_HIGH>;
 170                 };
 171
 172                 power: power {
 173                         label = "fritz4040:green:power";
 174                         gpios = <&qca8075 11 GPIO_ACTIVE_HIGH>;
 175                 };
 176
 177                 lan {
 178                         label = "fritz4040:green:lan";
 179                         gpios = <&qca8075 13 GPIO_ACTIVE_HIGH>;
 180                 };
 181
 182                 flash: info_amber {
 183                         label = "fritz4040:amber:info";
 184                         gpios = <&qca8075 15 GPIO_ACTIVE_HIGH>;
 185                 };
 186         };
 187 };
 188
 189 &tlmm {
 190         serial_pins: serial_pinmux {
 191                 mux {
 192                         pins = "gpio60", "gpio61";
 193                         function = "blsp_uart0";
 194                         bias-disable;
 195                 };
 196         };
 197
 198         spi_0_pins: spi_0_pinmux {
 199                 mux {
 200                         function = "blsp_spi0";
 201                         pins = "gpio55", "gpio56", "gpio57";
 202                         drive-strength = <12>;
 203                         bias-disable;
 204                 };
 205
 206                 mux_cs {
 207                         function = "gpio";
 208                         pins = "gpio54";
 209                         drive-strength = <2>;
 210                         bias-disable;
 211                         output-high;
 212                 };
 213         };
 214 };
 215
 216 &cryptobam {
 217         status = "okay";
 218 };
 219
 220 &blsp_dma {
 221         status = "okay";
 222 };
 223
 224 &spi_0 { /* BLSP1 QUP1 */
 225         pinctrl-0 = <&spi_0_pins>;
 226         pinctrl-names = "default";
 227         status = "okay";
 228         cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
 229
 230         mx25l25635f@0 {
 231                 compatible = "jedec,spi-nor";
 232                 #address-cells = <1>;
 233                 #size-cells = <0>;
 234                 reg = <0>;
 235                 spi-max-frequency = <24000000>;
 236                 status = "okay";
 237                 m25p,fast-read;
 238
 239                 partitions {
 240                         compatible = "fixed-partitions";
 241                         #address-cells = <1>;
 242                         #size-cells = <1>;
 243
 244                         partition0@0 {
 245                                 label = "SBL1";
 246                                 reg = <0x00000000 0x00040000>;
 247                                 read-only;
 248                         };
 249                         partition1@40000 {
 250                                 label = "MIBIB";
 251                                 reg = <0x00040000 0x00020000>;
 252                                 read-only;
 253                         };
 254                         partition2@60000 {
 255                                 label = "QSEE";
 256                                 reg = <0x00060000 0x00060000>;
 257                                 read-only;
 258                         };
 259                         partition3@c0000 {
 260                                 label = "CDT";
 261                                 reg = <0x000c0000 0x00010000>;
 262                                 read-only;
 263                         };
 264                         partition4@d0000 {
 265                                 label = "DDRPARAMS";
 266                                 reg = <0x000d0000 0x00010000>;
 267                                 read-only;
 268                         };
 269                         partition5@e0000 {
 270                                 label = "APPSBLENV"; /* uboot env - empty */
 271                                 reg = <0x000e0000 0x00010000>;
 272                                 read-only;
 273                         };
 274                         partition6@f0000 {
 275                                 label = "urlader"; /* APPSBL */
 276                                 reg = <0x000f0000 0x0002dc000>;
 277                                 read-only;
 278                         };
 279                         partition7@11dc00 {
 280                                 /* make a backup of this partition! */
 281                                 label = "urlader_config";
 282                                 reg = <0x0011dc00 0x00002400>;
 283                                 read-only;
 284                         };
 285                         partition8@120000 {
 286                                 label = "tffs1";
 287                                 reg = <0x00120000 0x00080000>;
 288                                 read-only;
 289                         };
 290                         partition9@1a0000 {
 291                                 label = "tffs2";
 292                                 reg = <0x001a0000 0x00080000>;
 293                                 read-only;
 294                         };
 295                         partition10@220000 {
 296                                 label = "uboot";
 297                                 reg = <0x00220000 0x00080000>;
 298                                 read-only;
 299                         };
 300                         partition11@2A0000 {
 301                                 label = "firmware";
 302                                 reg = <0x002a0000 0x01c60000>;
 303                         };
 304                         partition12@1f00000 {
 305                                 label = "jffs2";
 306                                 reg = <0x01f00000 0x00100000>;
 307                         };
 308                 };
 309         };
 310 };
 311
 312 &usb3_ss_phy {
 313         status = "okay";
 314 };
 315
 316 &usb3_hs_phy {
 317         status = "okay";
 318 };
 319
 320 &usb2_hs_phy {
 321         status = "okay";
 322 };