target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4028-wpj428.dts

   1 /* Copyright (c) 2015, The Linux Foundation. All rights reserved.
   2  * Copyright (c) 2017, Christian Mehlis <christian@m3hlis.de>
   3  * Copyright (c) 2017-2018, Sven Eckelmann <sven.eckelmann@openmesh.com>
   4  *
   5  * Permission to use, copy, modify, and/or distribute this software for any
   6  * purpose with or without fee is hereby granted, provided that the above
   7  * copyright notice and this permission notice appear in all copies.
   8  *
   9  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
  10  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
  11  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
  12  * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
  13  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
  14  * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
  15  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  16  *
  17  */
  18
  19 #include "qcom-ipq4019.dtsi"
  20 #include <dt-bindings/gpio/gpio.h>
  21 #include <dt-bindings/input/input.h>
  22 #include <dt-bindings/soc/qcom,tcsr.h>
  23
  24 / {
  25         model = "Compex WPJ428";
  26         compatible = "compex,wpj428", "qcom,ipq4019";
  27
  28         soc {
  29                 mdio@90000 {
  30                         status = "okay";
  31                 };
  32
  33                 ess-psgmii@98000 {
  34                         status = "okay";
  35                 };
  36
  37                 tcsr@194b000 {
  38                         /* select hostmode */
  39                         compatible = "qcom,tcsr";
  40                         reg = <0x194b000 0x100>;
  41                         qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
  42                         status = "okay";
  43                 };
  44
  45                 tcsr@1949000 {
  46                         compatible = "qcom,tcsr";
  47                         reg = <0x1949000 0x100>;
  48                         qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
  49                 };
  50
  51                 ess_tcsr@1953000 {
  52                         compatible = "qcom,tcsr";
  53                         reg = <0x1953000 0x1000>;
  54                         qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
  55                 };
  56
  57                 tcsr@1957000 {
  58                         compatible = "qcom,tcsr";
  59                         reg = <0x1957000 0x100>;
  60                         qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
  61                 };
  62
  63                 usb2: usb2@60f8800 {
  64                         status = "okay";
  65                 };
  66
  67                 usb3: usb3@8af8800 {
  68                         status = "okay";
  69                 };
  70
  71                 crypto@8e3a000 {
  72                         status = "okay";
  73                 };
  74
  75                 watchdog@b017000 {
  76                         status = "okay";
  77                 };
  78
  79                 ess-switch@c000000 {
  80                         switch_lan_bmp = <0x10>;
  81                         switch_wan_bmp = <0x20>;
  82
  83                         status = "okay";
  84                 };
  85
  86                 edma@c080000 {
  87                         status = "okay";
  88                 };
  89         };
  90
  91         gpio-keys {
  92                 compatible = "gpio-keys";
  93
  94                 reset {
  95                         label = "reset";
  96                         gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
  97                         linux,code = <KEY_RESTART>;
  98                 };
  99         };
 100
 101         aliases {
 102                 led-boot = &status;
 103                 led-failsafe = &status;
 104                 led-upgrade = &status;
 105         };
 106
 107         gpio-leds {
 108                 compatible = "gpio-leds";
 109
 110                 status: rss4 {
 111                         label = "wpj428:green:rss4";
 112                         gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>;
 113                 };
 114
 115                 rss3 {
 116                         label = "wpj428:green:rss3";
 117                         gpios = <&tlmm 4 GPIO_ACTIVE_HIGH>;
 118                 };
 119         };
 120
 121         beeper: beeper {
 122                 compatible = "gpio-beeper";
 123                 gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>;
 124         };
 125 };
 126
 127 &tlmm {
 128         serial_pins: serial_pinmux {
 129                 mux {
 130                         pins = "gpio60", "gpio61";
 131                         function = "blsp_uart0";
 132                         bias-disable;
 133                 };
 134         };
 135
 136         spi_0_pins: spi_0_pinmux {
 137                 pin {
 138                         function = "blsp_spi0";
 139                         pins = "gpio55", "gpio56", "gpio57";
 140                         drive-strength = <12>;
 141                         bias-disable;
 142                 };
 143                 pin_cs {
 144                         function = "gpio";
 145                         pins = "gpio54";
 146                         drive-strength = <2>;
 147                         bias-disable;
 148                         output-high;
 149                 };
 150         };
 151 };
 152
 153 &blsp_dma {
 154         status = "okay";
 155 };
 156
 157 &blsp1_spi1 {
 158         pinctrl-0 = <&spi_0_pins>;
 159         pinctrl-names = "default";
 160         status = "okay";
 161         cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
 162
 163         m25p80@0 {
 164                 #address-cells = <1>;
 165                 #size-cells = <1>;
 166                 compatible = "jedec,spi-nor";
 167                 reg = <0>;
 168                 spi-max-frequency = <24000000>;
 169
 170                 partitions {
 171                         compatible = "fixed-partitions";
 172                         #address-cells = <1>;
 173                         #size-cells = <1>;
 174
 175                         partition0@0 {
 176                                 label = "0:SBL1";
 177                                 reg = <0x00000000 0x00040000>;
 178                                 read-only;
 179                         };
 180                         partition1@40000 {
 181                                 label = "0:MIBIB";
 182                                 reg = <0x00040000 0x00020000>;
 183                                 read-only;
 184                         };
 185                         partition2@60000 {
 186                                 label = "0:QSEE";
 187                                 reg = <0x00060000 0x00060000>;
 188                                 read-only;
 189                         };
 190                         partition3@c0000 {
 191                                 label = "0:CDT";
 192                                 reg = <0x000c0000 0x00010000>;
 193                                 read-only;
 194                         };
 195                         partition4@d0000 {
 196                                 label = "0:DDRPARAMS";
 197                                 reg = <0x000d0000 0x00010000>;
 198                                 read-only;
 199                         };
 200                         partition5@e0000 {
 201                                 label = "0:APPSBLENV"; /* uboot env*/
 202                                 reg = <0x000e0000 0x00010000>;
 203                                 read-only;
 204                         };
 205                         partition5@f0000 {
 206                                 label = "0:APPSBL"; /* uboot */
 207                                 reg = <0x000f0000 0x00080000>;
 208                                 read-only;
 209                         };
 210                         partition5@170000 {
 211                                 label = "0:ART";
 212                                 reg = <0x00170000 0x00010000>;
 213                                 read-only;
 214                         };
 215                         partition6@180000 {
 216                                 compatible = "denx,fit";
 217                                 label = "firmware";
 218                                 reg = <0x00180000 0x01e80000>;
 219                         };
 220                 };
 221         };
 222 };
 223
 224 &blsp1_uart1 {
 225         pinctrl-0 = <&serial_pins>;
 226         pinctrl-names = "default";
 227         status = "okay";
 228 };
 229
 230 &cryptobam {
 231         status = "okay";
 232 };
 233
 234 &gmac0 {
 235         qcom,phy_mdio_addr = <4>;
 236         qcom,poll_required = <1>;
 237         qcom,forced_speed = <1000>;
 238         qcom,forced_duplex = <1>;
 239         vlan_tag = <2 0x20>;
 240 };
 241
 242 &gmac1 {
 243         qcom,phy_mdio_addr = <3>;
 244         qcom,poll_required = <1>;
 245         qcom,forced_speed = <1000>;
 246         qcom,forced_duplex = <1>;
 247         vlan_tag = <1 0x10>;
 248 };
 249
 250 &usb3_ss_phy {
 251         status = "okay";
 252 };
 253
 254 &usb3_hs_phy {
 255         status = "okay";
 256 };
 257
 258 &usb2_hs_phy {
 259         status = "okay";
 260 };
 261
 262 &wifi0 {
 263         status = "okay";
 264 };
 265
 266 &wifi1 {
 267         status = "okay";
 268 };