ipq40xx: use upstream board-2.bin
[openwrt/openwrt.git] / target / linux / ipq40xx / files-4.14 / arch / arm / boot / dts / qcom-ipq4029-gl-b1300.dts
1 /* Copyright (c) 2015, The Linux Foundation. All rights reserved.
2 *
3 * Permission to use, copy, modify, and/or distribute this software for any
4 * purpose with or without fee is hereby granted, provided that the above
5 * copyright notice and this permission notice appear in all copies.
6 *
7 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
8 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
9 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
10 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
11 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
12 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
13 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
14 *
15 */
16
17 #include "qcom-ipq4019.dtsi"
18 #include <dt-bindings/gpio/gpio.h>
19 #include <dt-bindings/input/input.h>
20 #include <dt-bindings/soc/qcom,tcsr.h>
21
22 / {
23 model = "GL.iNet GL-B1300";
24 compatible = "glinet,gl-b1300", "qcom,ipq4019";
25
26 aliases {
27 led-boot = &power;
28 led-failsafe = &power;
29 led-running = &power;
30 led-upgrade = &power;
31 };
32
33 memory {
34 device_type = "memory";
35 reg = <0x80000000 0x10000000>;
36 };
37
38 soc {
39 mdio@90000 {
40 status = "okay";
41 };
42
43 ess-psgmii@98000 {
44 status = "okay";
45 };
46
47 tcsr@1949000 {
48 compatible = "qcom,tcsr";
49 reg = <0x1949000 0x100>;
50 qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
51 };
52
53 tcsr@194b000 {
54 /* select hostmode */
55 compatible = "qcom,tcsr";
56 reg = <0x194b000 0x100>;
57 qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
58 status = "okay";
59 };
60
61 ess_tcsr@1953000 {
62 compatible = "qcom,tcsr";
63 reg = <0x1953000 0x1000>;
64 qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
65 };
66
67 tcsr@1957000 {
68 compatible = "qcom,tcsr";
69 reg = <0x1957000 0x100>;
70 qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
71 };
72
73 usb2@60f8800 {
74 status = "okay";
75 };
76
77 serial@78af000 {
78 pinctrl-0 = <&serial_pins>;
79 pinctrl-names = "default";
80 status = "okay";
81 };
82
83 usb3@8af8800 {
84 status = "okay";
85 };
86
87 crypto@8e3a000 {
88 status = "okay";
89 };
90
91 watchdog@b017000 {
92 status = "okay";
93 };
94
95 ess-switch@c000000 {
96 status = "okay";
97 switch_lan_bmp = <0x18>;
98 switch_wan_bmp = <0x20>;
99 };
100
101 edma@c080000 {
102 status = "okay";
103 };
104 };
105
106 gpio-keys {
107 compatible = "gpio-keys";
108
109 wps {
110 label = "wps";
111 gpios = <&tlmm 5 GPIO_ACTIVE_LOW>;
112 linux,code = <KEY_WPS_BUTTON>;
113 };
114
115 reset {
116 label = "reset";
117 gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
118 linux,code = <KEY_RESTART>;
119 };
120 };
121
122 gpio-leds {
123 compatible = "gpio-leds";
124
125 power: power {
126 label = "gl-b1300:green:power";
127 gpios = <&tlmm 4 GPIO_ACTIVE_HIGH>;
128 default-state = "on";
129 };
130
131 mesh {
132 label = "gl-b1300:green:mesh";
133 gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
134 };
135
136 wlan {
137 label = "gl-b1300:green:wlan";
138 gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
139 };
140 };
141 };
142
143 &blsp_dma {
144 status = "okay";
145 };
146
147 &cryptobam {
148 status = "okay";
149 };
150
151 &spi_0 {
152 pinctrl-0 = <&spi_0_pins>;
153 pinctrl-names = "default";
154 status = "okay";
155 cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
156
157 mx25l25635f@0 {
158 compatible = "jedec,spi-nor";
159 #address-cells = <1>;
160 #size-cells = <1>;
161 reg = <0>;
162 spi-max-frequency = <24000000>;
163
164 SBL1@0 {
165 label = "SBL1";
166 reg = <0x0 0x40000>;
167 read-only;
168 };
169
170 MIBIB@40000 {
171 label = "MIBIB";
172 reg = <0x40000 0x20000>;
173 read-only;
174 };
175
176 QSEE@60000 {
177 label = "QSEE";
178 reg = <0x60000 0x60000>;
179 read-only;
180 };
181
182 CDT@c0000 {
183 label = "CDT";
184 reg = <0xc0000 0x10000>;
185 read-only;
186 };
187
188 DDRPARAMS@d0000 {
189 label = "DDRPARAMS";
190 reg = <0xd0000 0x10000>;
191 read-only;
192 };
193
194 APPSBLENV@e0000 {
195 label = "APPSBLENV";
196 reg = <0xe0000 0x10000>;
197 read-only;
198 };
199
200 APPSBL@f0000 {
201 label = "APPSBL";
202 reg = <0xf0000 0x80000>;
203 read-only;
204 };
205
206 ART@170000 {
207 label = "ART";
208 reg = <0x170000 0x10000>;
209 read-only;
210 };
211
212 firmware@180000 {
213 label = "firmware";
214 reg = <0x180000 0x1e80000>;
215 };
216 };
217 };
218
219 &tlmm {
220 serial_pins: serial_pinmux {
221 mux {
222 pins = "gpio60", "gpio61";
223 function = "blsp_uart0";
224 bias-disable;
225 };
226 };
227
228 spi_0_pins: spi_0_pinmux {
229 pinmux {
230 function = "blsp_spi0";
231 pins = "gpio55", "gpio56", "gpio57";
232 };
233 pinmux_cs {
234 function = "gpio";
235 pins = "gpio54";
236 };
237 pinconf {
238 pins = "gpio55", "gpio56", "gpio57";
239 drive-strength = <12>;
240 bias-disable;
241 };
242 pinconf_cs {
243 pins = "gpio54";
244 drive-strength = <2>;
245 bias-disable;
246 output-high;
247 };
248 };
249 };
250
251 &usb2_hs_phy {
252 status = "okay";
253 };
254
255 &usb3_hs_phy {
256 status = "okay";
257 };
258
259 &usb3_ss_phy {
260 status = "okay";
261 };
262
263 &wifi0 {
264 status = "okay";
265 qcom,ath10k-calibration-variant = "GL-B1300";
266 };
267
268 &wifi1 {
269 status = "okay";
270 qcom,ath10k-calibration-variant = "GL-B1300";
271 };