target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-jalapeno.dts

   1 /* Copyright (c) 2015, The Linux Foundation. All rights reserved.
   2  * Copyright (c) 2018, Robert Marko <robimarko@gmail.com>
   3  *
   4  * Permission to use, copy, modify, and/or distribute this software for any
   5  * purpose with or without fee is hereby granted, provided that the above
   6  * copyright notice and this permission notice appear in all copies.
   7  *
   8  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
   9  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
  10  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
  11  * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
  12  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
  13  * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
  14  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  15  *
  16  */
  17
  18 #include "qcom-ipq4019.dtsi"
  19 #include <dt-bindings/gpio/gpio.h>
  20 #include <dt-bindings/input/input.h>
  21 #include <dt-bindings/soc/qcom,tcsr.h>
  22
  23 / {
  24         model = "8devices Jalapeno";
  25         compatible = "8dev,jalapeno", "qcom,ipq4019";
  26
  27         soc {
  28                 rng@22000 {
  29                         status = "okay";
  30                 };
  31
  32                 mdio@90000 {
  33                         status = "okay";
  34                         pinctrl-0 = <&mdio_pins>;
  35                         pinctrl-names = "default";
  36                 };
  37
  38                 ess-psgmii@98000 {
  39                         status = "okay";
  40                 };
  41
  42                 counter@4a1000 {
  43                         compatible = "qcom,qca-gcnt";
  44                         reg = <0x4a1000 0x4>;
  45                 };
  46
  47                 tcsr@1949000 {
  48                         compatible = "qcom,tcsr";
  49                         reg = <0x1949000 0x100>;
  50                         qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
  51                 };
  52
  53                 tcsr@194b000 {
  54                         /* select hostmode */
  55                         compatible = "qcom,tcsr";
  56                         reg = <0x194b000 0x100>;
  57                         qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
  58                         status = "okay";
  59                 };
  60
  61                 ess_tcsr@1953000 {
  62                         compatible = "qcom,tcsr";
  63                         reg = <0x1953000 0x1000>;
  64                         qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
  65                 };
  66
  67                 tcsr@1957000 {
  68                         compatible = "qcom,tcsr";
  69                         reg = <0x1957000 0x100>;
  70                         qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
  71                 };
  72
  73                 usb2: usb2@60f8800 {
  74                         status = "okay";
  75                 };
  76
  77                 usb3: usb3@8af8800 {
  78                         status = "okay";
  79                 };
  80
  81                 crypto@8e3a000 {
  82                         status = "okay";
  83                 };
  84
  85                 watchdog@b017000 {
  86                         status = "okay";
  87                 };
  88
  89                 ess-switch@c000000 {
  90                         status = "okay";
  91                         switch_lan_bmp = <0x10>; /* lan port bitmap */
  92                 };
  93
  94                 edma@c080000 {
  95                         status = "okay";
  96                 };
  97         };
  98 };
  99
 100 &tlmm {
 101         mdio_pins: mdio_pinmux {
 102                 pinmux_1 {
 103                         pins = "gpio53";
 104                         function = "mdio";
 105                 };
 106                 pinmux_2 {
 107                         pins = "gpio52";
 108                         function = "mdc";
 109                 };
 110                 pinconf {
 111                         pins = "gpio52", "gpio53";
 112                         bias-pull-up;
 113                 };
 114         };
 115
 116         serial_pins: serial_pinmux {
 117                 mux {
 118                         pins = "gpio60", "gpio61";
 119                         function = "blsp_uart0";
 120                         bias-disable;
 121                 };
 122         };
 123
 124         spi_0_pins: spi_0_pinmux {
 125                 pin {
 126                         function = "blsp_spi0";
 127                         pins = "gpio55", "gpio56", "gpio57";
 128                         drive-strength = <2>;
 129                         bias-disable;
 130                 };
 131                 pin_cs {
 132                         function = "gpio";
 133                         pins = "gpio54", "gpio59";
 134                         drive-strength = <2>;
 135                         bias-disable;
 136                         output-high;
 137                 };
 138         };
 139 };
 140
 141 &blsp_dma {
 142         status = "okay";
 143 };
 144
 145 &blsp1_spi1 {
 146         pinctrl-0 = <&spi_0_pins>;
 147         pinctrl-names = "default";
 148         cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>, <&tlmm 59 GPIO_ACTIVE_HIGH>;
 149         status = "okay";
 150
 151         m25p80@0 {
 152                 reg = <0>;
 153                 compatible = "jedec,spi-nor";
 154                 spi-max-frequency = <24000000>;
 155
 156                 partitions {
 157                         compatible = "fixed-partitions";
 158                         #address-cells = <1>;
 159                         #size-cells = <1>;
 160
 161                         partition0@0 {
 162                                 label = "SBL1";
 163                                 reg = <0x00000000 0x00040000>;
 164                                 read-only;
 165                         };
 166                         partition1@40000 {
 167                                 label = "MIBIB";
 168                                 reg = <0x00040000 0x00020000>;
 169                                 read-only;
 170                         };
 171                         partition2@60000 {
 172                                 label = "QSEE";
 173                                 reg = <0x00060000 0x00060000>;
 174                                 read-only;
 175                         };
 176                         partition3@c0000 {
 177                                 label = "CDT";
 178                                 reg = <0x000c0000 0x00010000>;
 179                                 read-only;
 180                         };
 181                         partition4@d0000 {
 182                                 label = "DDRPARAMS";
 183                                 reg = <0x000d0000 0x00010000>;
 184                                 read-only;
 185                         };
 186                         partition5@e0000 {
 187                                 label = "APPSBLENV"; /* uboot env*/
 188                                 reg = <0x000e0000 0x00010000>;
 189                                 read-only;
 190                         };
 191                         partition5@f0000 {
 192                                 label = "APPSBL"; /* uboot */
 193                                 reg = <0x000f0000 0x00080000>;
 194                                 read-only;
 195                         };
 196                         partition5@170000 {
 197                                 label = "ART";
 198                                 reg = <0x00170000 0x00010000>;
 199                                 read-only;
 200                         };
 201                 };
 202         };
 203
 204         spi-nand@1 {
 205                 status = "okay";
 206                 compatible = "spi-nand";
 207                 reg = <1>;
 208                 spi-max-frequency = <24000000>;
 209                 partitions {
 210                         compatible = "fixed-partitions";
 211                         #address-cells = <1>;
 212                         #size-cells = <1>;
 213
 214                         partition0@0 {
 215                                 label = "ubi";
 216                                 reg = <0x00000000 0x08000000>;
 217                         };
 218                 };
 219         };
 220 };
 221
 222 &blsp1_uart1 {
 223         pinctrl-0 = <&serial_pins>;
 224         pinctrl-names = "default";
 225         status = "okay";
 226 };
 227
 228 &cryptobam {
 229         status = "okay";
 230 };
 231
 232 &gmac0 {
 233         qcom,poll_required = <1>;
 234         qcom,poll_required_dynamic = <1>;
 235         qcom,phy_mdio_addr = <3>;
 236         vlan_tag = <1 0x10>;
 237 };
 238
 239 &gmac1 {
 240         qcom,poll_required = <1>;
 241         qcom,poll_required_dynamic = <1>;
 242         qcom,phy_mdio_addr = <4>;
 243         vlan_tag = <2 0x20>;
 244 };
 245
 246 &wifi0 {
 247         status = "okay";
 248         qcom,ath10k-calibration-variant = "8devices-Jalapeno";
 249 };
 250
 251 &wifi1 {
 252         status = "okay";
 253         qcom,ath10k-calibration-variant = "8devices-Jalapeno";
 254 };
 255
 256 &usb3_ss_phy {
 257         status = "okay";
 258 };
 259
 260 &usb3_hs_phy {
 261         status = "okay";
 262 };
 263
 264 &usb2_hs_phy {
 265         status = "okay";
 266 };