target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-rt-ac58u.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include "qcom-ipq4019.dtsi"
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6 #include <dt-bindings/soc/qcom,tcsr.h>
   7
   8 / {
   9         model = "ASUS RT-AC58U";
  10         compatible = "asus,rt-ac58u", "qcom,ipq4019";
  11
  12         memory {
  13                 device_type = "memory";
  14                 reg = <0x80000000 0x8000000>;
  15         };
  16
  17         aliases {
  18                 led-boot = &power;
  19                 led-failsafe = &power;
  20                 led-running = &power;
  21                 led-upgrade = &power;
  22         };
  23
  24         chosen {
  25                 bootargs-append = " ubi.mtd=UBI_DEV";
  26         };
  27
  28         soc {
  29                 mdio@90000 {
  30                         status = "okay";
  31                 };
  32
  33                 ess-psgmii@98000 {
  34                         status = "okay";
  35                 };
  36
  37                 tcsr@1949000 {
  38                         compatible = "qcom,tcsr";
  39                         reg = <0x1949000 0x100>;
  40                         qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
  41                 };
  42
  43                 tcsr@194b000 {
  44                         compatible = "qcom,tcsr";
  45                         reg = <0x194b000 0x100>;
  46                         qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
  47                 };
  48
  49                 ess_tcsr@1953000 {
  50                         compatible = "qcom,tcsr";
  51                         reg = <0x1953000 0x1000>;
  52                         qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
  53                 };
  54
  55                 tcsr@1957000 {
  56                         compatible = "qcom,tcsr";
  57                         reg = <0x1957000 0x100>;
  58                         qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
  59                 };
  60
  61                 usb2@60f8800 {
  62                         status = "okay";
  63                 };
  64
  65                 usb3@8af8800 {
  66                         status = "okay";
  67                 };
  68
  69                 crypto@8e3a000 {
  70                         status = "okay";
  71                 };
  72
  73                 wifi@a000000 {
  74                         status = "okay";
  75                         qcom,ath10k-calibration-variant = "RT-AC58U";
  76                 };
  77
  78                 wifi@a800000 {
  79                         status = "okay";
  80                         qcom,ath10k-calibration-variant = "RT-AC58U";
  81                 };
  82
  83                 watchdog@b017000 {
  84                         status = "okay";
  85                 };
  86
  87                 ess-switch@c000000 {
  88                         status = "okay";
  89                 };
  90
  91                 edma@c080000 {
  92                         status = "okay";
  93                 };
  94         };
  95
  96         gpio-keys {
  97                 compatible = "gpio-keys";
  98
  99                 reset {
 100                         label = "reset";
 101                         gpios = <&tlmm 4 GPIO_ACTIVE_LOW>;
 102                         linux,code = <KEY_RESTART>;
 103                 };
 104
 105                 wps {
 106                         label = "wps";
 107                         gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
 108                         linux,code = <KEY_WPS_BUTTON>;
 109                 };
 110         };
 111
 112         gpio-leds {
 113                 compatible = "gpio-leds";
 114
 115                 power: status {
 116                         label = "rt-ac58u:blue:status";
 117                         gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
 118                 };
 119
 120                 wan {
 121                         label = "rt-ac58u:blue:wan";
 122                         gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>;
 123                 };
 124
 125                 wlan2G {
 126                         label = "rt-ac58u:blue:wlan2G";
 127                         gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>;
 128                 };
 129
 130                 wan5G {
 131                         label = "rt-ac58u:blue:wlan5G";
 132                         gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>;
 133                 };
 134
 135                 usb {
 136                         label = "rt-ac58u:blue:usb";
 137                         gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
 138                 };
 139
 140                 lan {
 141                         label = "rt-ac58u:blue:lan";
 142                         gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
 143                 };
 144         };
 145 };
 146
 147 &cryptobam {
 148         status = "okay";
 149 };
 150
 151 &blsp_dma {
 152         status = "okay";
 153 };
 154
 155 &tlmm {
 156         serial_pins: serial_pinmux {
 157                 mux {
 158                         pins = "gpio60", "gpio61";
 159                         function = "blsp_uart0";
 160                         bias-disable;
 161                 };
 162         };
 163
 164         spi_0_pins: spi_0_pinmux {
 165                 mux {
 166                         function = "blsp_spi0";
 167                         pins = "gpio55", "gpio56", "gpio57";
 168                         drive-strength = <12>;
 169                         bias-disable;
 170                 };
 171
 172                 mux_cs {
 173                         function = "gpio";
 174                         pins = "gpio54", "gpio59";
 175                         drive-strength = <2>;
 176                         bias-disable;
 177                         output-high;
 178                 };
 179         };
 180 };
 181
 182 &blsp1_spi1 { /* BLSP1 QUP1 */
 183         pinctrl-0 = <&spi_0_pins>;
 184         pinctrl-names = "default";
 185         status = "okay";
 186         cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>,
 187                    <&tlmm 59 GPIO_ACTIVE_HIGH>;
 188
 189         flash@0 {
 190                 #address-cells = <1>;
 191                 #size-cells = <0>;
 192                 /*
 193                  * U-boot looks for "n25q128a11" node,
 194                  * if we don't have it, it will spit out the following warning:
 195                  * "ipq: fdt fixup unable to find compatible node".
 196                  */
 197                 compatible = "jedec,spi-nor";
 198                 reg = <0>;
 199                 linux,modalias = "m25p80", "mx25l1606e", "n25q128a11";
 200                 spi-max-frequency = <24000000>;
 201
 202                 partitions {
 203                         compatible = "fixed-partitions";
 204                         #address-cells = <1>;
 205                         #size-cells = <1>;
 206
 207                         partition0@0 {
 208                                 label = "SBL1";
 209                                 reg = <0x00000000 0x00040000>;
 210                                 read-only;
 211                         };
 212                         partition1@40000 {
 213                                 label = "MIBIB";
 214                                 reg = <0x00040000 0x00020000>;
 215                                 read-only;
 216                         };
 217                         partition2@60000 {
 218                                 label = "QSEE";
 219                                 reg = <0x00060000 0x00060000>;
 220                                 read-only;
 221                         };
 222                         partition3@c0000 {
 223                                 label = "CDT";
 224                                 reg = <0x000c0000 0x00010000>;
 225                                 read-only;
 226                         };
 227                         partition4@d0000 {
 228                                 label = "DDRPARAMS";
 229                                 reg = <0x000d0000 0x00010000>;
 230                                 read-only;
 231                         };
 232                         partition5@e0000 {
 233                                 label = "APPSBLENV"; /* uboot env*/
 234                                 reg = <0x000e0000 0x00010000>;
 235                                 read-only;
 236                         };
 237                         partition5@f0000 {
 238                                 label = "APPSBL"; /* uboot */
 239                                 reg = <0x000f0000 0x00080000>;
 240                                 read-only;
 241                         };
 242                         partition5@170000 {
 243                                 label = "ART";
 244                                 reg = <0x00170000 0x00010000>;
 245                                 read-only;
 246                         };
 247                         /* 0x00180000 - 0x00200000 unused */
 248                 };
 249         };
 250
 251         flash@1 {
 252                 #address-cells = <1>;
 253                 #size-cells = <0>;
 254                 compatible = "spinand,mt29f";
 255                 reg = <1>;
 256                 spi-max-frequency = <24000000>;
 257
 258                 /*
 259                  * U-boot looks for "spinand,mt29f" node,
 260                  * if we don't have it, it will spit out the following warning:
 261                  * "ipq: fdt fixup unable to find compatible node".
 262                  */
 263
 264                 partitions {
 265                         compatible = "fixed-partitions";
 266                         #address-cells = <1>;
 267                         #size-cells = <1>;
 268
 269                         partition@0 {
 270                                 label = "ubi";
 271                                 reg = <0x00000000 0x08000000>;
 272                         };
 273                 };
 274         };
 275 };
 276
 277 &blsp1_uart1 {
 278         pinctrl-0 = <&serial_pins>;
 279         pinctrl-names = "default";
 280         status = "okay";
 281 };
 282
 283 &usb3_ss_phy {
 284         status = "okay";
 285 };
 286
 287 &usb3_hs_phy {
 288         status = "okay";
 289 };
 290
 291 &usb2_hs_phy {
 292         status = "okay";
 293 };