target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-wre6606.dts

   1 /* Copyright (c) 2015, The Linux Foundation. All rights reserved.
   2  * Copyright (c) 2018, David Bauer <mail@david-bauer.net>
   3  *
   4  * Permission to use, copy, modify, and/or distribute this software for any
   5  * purpose with or without fee is hereby granted, provided that the above
   6  * copyright notice and this permission notice appear in all copies.
   7  *
   8  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
   9  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
  10  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
  11  * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
  12  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
  13  * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
  14  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  15  *
  16  */
  17
  18 #include "qcom-ipq4019.dtsi"
  19 #include <dt-bindings/gpio/gpio.h>
  20 #include <dt-bindings/input/input.h>
  21 #include <dt-bindings/soc/qcom,tcsr.h>
  22
  23 / {
  24         model = "ZyXEL WRE6606";
  25         compatible = "zyxel,wre6606";
  26
  27         aliases {
  28                 led-boot = &power;
  29                 led-failsafe = &power;
  30                 led-running = &power;
  31                 led-upgrade = &power;
  32         };
  33
  34         chosen {
  35                 bootargs-append = " mtdparts=";
  36         };
  37
  38         soc {
  39                 rng@22000 {
  40                         status = "okay";
  41                 };
  42
  43                 mdio@90000 {
  44                         status = "okay";
  45                 };
  46
  47                 ess-psgmii@98000 {
  48                         status = "okay";
  49                 };
  50
  51                 tcsr@1949000 {
  52                         compatible = "qcom,tcsr";
  53                         reg = <0x1949000 0x100>;
  54                         qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
  55                 };
  56
  57                 ess_tcsr@1953000 {
  58                         compatible = "qcom,tcsr";
  59                         reg = <0x1953000 0x1000>;
  60                         qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
  61                 };
  62
  63                 tcsr@1957000 {
  64                         compatible = "qcom,tcsr";
  65                         reg = <0x1957000 0x100>;
  66                         qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
  67                 };
  68
  69                 crypto@8e3a000 {
  70                         status = "okay";
  71                 };
  72
  73                 watchdog@b017000 {
  74                         status = "okay";
  75                 };
  76
  77                 ess-switch@c000000 {
  78                         status = "okay";
  79                 };
  80
  81                 edma@c080000 {
  82                         status = "okay";
  83                         qcom,num_gmac = <1>;
  84                 };
  85         };
  86
  87         gpio-leds {
  88                 compatible = "gpio-leds";
  89
  90                 wps {
  91                         label = "wre6606:green:wps";
  92                         gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>;
  93                 };
  94
  95                 wlan5g_green {
  96                         label = "wre6606:green:wlan5g";
  97                         gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
  98                 };
  99
 100                 power: power {
 101                         label = "wre6606:green:power";
 102                         gpios = <&tlmm 4 GPIO_ACTIVE_HIGH>;
 103                 };
 104
 105                 wlan5g_red {
 106                         label = "wre6606:red:wlan5g";
 107                         gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>;
 108                 };
 109
 110                 wlan2g_red {
 111                         label = "wre6606:red:wlan2g";
 112                         gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>;
 113                 };
 114
 115                 wlan2g_green {
 116                         label = "wre6606:green:wlan2g";
 117                         gpios = <&tlmm 59 GPIO_ACTIVE_HIGH>;
 118                 };
 119         };
 120
 121         gpio-keys {
 122                 compatible = "gpio-keys";
 123
 124                 wps {
 125                         label = "wps";
 126                         gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
 127                         linux,code = <KEY_WPS_BUTTON>;
 128                 };
 129         };
 130 };
 131
 132 &tlmm {
 133         serial_pins: serial_pinmux {
 134                 mux {
 135                         pins = "gpio60", "gpio61";
 136                         function = "blsp_uart0";
 137                         bias-disable;
 138                 };
 139         };
 140
 141         spi_0_pins: spi_0_pinmux {
 142                 pin {
 143                         function = "blsp_spi0";
 144                         pins = "gpio55", "gpio56", "gpio57";
 145                         drive-strength = <12>;
 146                         bias-disable;
 147                 };
 148                 pin_cs {
 149                         function = "gpio";
 150                         pins = "gpio54";
 151                         drive-strength = <2>;
 152                         bias-disable;
 153                         output-high;
 154                 };
 155         };
 156 };
 157
 158 &blsp_dma {
 159         status = "okay";
 160 };
 161
 162 &blsp1_spi1 {
 163         pinctrl-0 = <&spi_0_pins>;
 164         pinctrl-names = "default";
 165         status = "okay";
 166         cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
 167
 168         mx25l12805d@0 {
 169                 compatible = "jedec,spi-nor";
 170                 reg = <0>;
 171                 spi-max-frequency = <24000000>;
 172
 173                 partitions {
 174                         compatible = "fixed-partitions";
 175                         #address-cells = <1>;
 176                         #size-cells = <1>;
 177
 178                         partition0@0 {
 179                                 label = "SBL1";
 180                                 reg = <0x00000000 0x00040000>;
 181                                 read-only;
 182                         };
 183
 184                         partition1@40000 {
 185                                 label = "MIBIB";
 186                                 reg = <0x00040000 0x00020000>;
 187                                 read-only;
 188                         };
 189
 190                         partition2@60000 {
 191                                 label = "QSEE";
 192                                 reg = <0x00060000 0x00060000>;
 193                                 read-only;
 194                         };
 195
 196                         partition3@c0000 {
 197                                 label = "CDT";
 198                                 reg = <0x000c0000 0x00010000>;
 199                                 read-only;
 200                         };
 201
 202                         partition4@d0000 {
 203                                 label = "DDRPARAMS";
 204                                 reg = <0x000d0000 0x00010000>;
 205                                 read-only;
 206                         };
 207
 208                         partition5@E0000 {
 209                                 label = "APPSBLENV";
 210                                 reg = <0x000e0000 0x00010000>;
 211                                 read-only;
 212                         };
 213
 214                         partition6@F0000 {
 215                                 label = "APPSBL";
 216                                 reg = <0x000f0000 0x00080000>;
 217                                 read-only;
 218                         };
 219
 220                         partition7@170000 {
 221                                 label = "ART";
 222                                 reg = <0x00170000 0x00010000>;
 223                                 read-only;
 224                         };
 225
 226                         partition8@180000 {
 227                                 compatible = "denx,fit";
 228                                 label = "firmware";
 229                                 reg = <0x00180000 0x00ce0000>;
 230                         };
 231
 232                         partition9@e60000 {
 233                                 label = "manufacture";
 234                                 reg = <0x00e60000 0x00050000>;
 235                                 read-only;
 236                         };
 237
 238                         partition10@eb0000 {
 239                                 label = "storage";
 240                                 reg = <0x00eb0000 0x00150000>;
 241                                 read-only;
 242                         };
 243                 };
 244         };
 245 };
 246
 247 &blsp1_uart1 {
 248         pinctrl-0 = <&serial_pins>;
 249         pinctrl-names = "default";
 250         status = "okay";
 251 };
 252
 253 &cryptobam {
 254         status = "okay";
 255 };
 256
 257 &wifi0 {
 258         status = "okay";
 259         qcom,ath10k-calibration-variant = "ZyXEL-WRE6606";
 260 };
 261
 262 &wifi1 {
 263         status = "okay";
 264         qcom,ath10k-calibration-variant = "ZyXEL-WRE6606";
 265 };