target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-fritzbox-7530.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include "qcom-ipq4019.dtsi"
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6 #include <dt-bindings/soc/qcom,tcsr.h>
   7
   8 / {
   9         model = "AVM FRITZ!Box 7530";
  10         compatible = "avm,fritzbox-7530";
  11
  12         aliases {
  13                 led-boot = &power_green;
  14                 led-failsafe = &info_red;
  15                 led-running = &power_green;
  16                 led-upgrade = &info_green;
  17         };
  18
  19         soc {
  20                 rng@22000 {
  21                         status = "okay";
  22                 };
  23
  24                 mdio@90000 {
  25                         status = "okay";
  26                 };
  27
  28                 ess-psgmii@98000 {
  29                         status = "okay";
  30                 };
  31
  32                 tcsr@1949000 {
  33                         compatible = "qcom,tcsr";
  34                         reg = <0x1949000 0x100>;
  35                         qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
  36                 };
  37
  38                 tcsr@194b000 {
  39                         compatible = "qcom,tcsr";
  40                         reg = <0x194b000 0x100>;
  41                         qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
  42                 };
  43
  44                 ess_tcsr@1953000 {
  45                         compatible = "qcom,tcsr";
  46                         reg = <0x1953000 0x1000>;
  47                         qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
  48                 };
  49
  50                 tcsr@1957000 {
  51                         compatible = "qcom,tcsr";
  52                         reg = <0x1957000 0x100>;
  53                         qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
  54                 };
  55
  56                 usb3@8af8800 {
  57                         status = "okay";
  58                 };
  59
  60                 crypto@8e3a000 {
  61                         status = "okay";
  62                 };
  63
  64                 watchdog@b017000 {
  65                         status = "okay";
  66                 };
  67
  68                 ess-switch@c000000 {
  69                         status = "okay";
  70                 };
  71
  72                 edma@c080000 {
  73                         status = "okay";
  74                         qcom,num_gmac = <1>;
  75                 };
  76         };
  77
  78         keys {
  79                 compatible = "gpio-keys";
  80
  81                 wlan {
  82                         label = "wlan";
  83                         gpios = <&tlmm 42 GPIO_ACTIVE_LOW>;
  84                         linux,code = <KEY_RFKILL>;
  85                 };
  86
  87                 wps {
  88                         label = "wps";
  89                         gpios = <&tlmm 41 GPIO_ACTIVE_LOW>;
  90                         linux,code = <KEY_WPS_BUTTON>;
  91                 };
  92
  93                 dect {
  94                         label = "dect";
  95                         gpios = <&tlmm 43 GPIO_ACTIVE_LOW>;
  96                         linux,code = <KEY_PHONE>;
  97                 };
  98         };
  99
 100         leds {
 101                 compatible = "gpio-leds";
 102
 103                 info_red: info_red {
 104                         label = "fritzbox-7530:red:info";
 105                         gpios = <&tlmm 32 GPIO_ACTIVE_LOW>;
 106                 };
 107
 108                 info_green: info {
 109                         label = "fritzbox-7530:green:info";
 110                         gpios = <&tlmm 33 GPIO_ACTIVE_LOW>;
 111                 };
 112
 113                 wlan {
 114                         label = "fritzbox-7530:green:wlan";
 115                         gpios = <&tlmm 34 GPIO_ACTIVE_LOW>;
 116                 };
 117
 118                 fon {
 119                         label = "fritzbox-7530:green:fon";
 120                         gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
 121                 };
 122
 123                 power_green: power {
 124                         label = "fritzbox-7530:green:power";
 125                         gpios = <&tlmm 39 GPIO_ACTIVE_LOW>;
 126                 };
 127
 128                 wps {
 129                         label = "fritzbox-7530:green:wps";
 130                         gpios = <&tlmm 45 GPIO_ACTIVE_LOW>;
 131                 };
 132         };
 133 };
 134
 135 &tlmm {
 136         serial_0_pins: serial_pinmux {
 137                 mux {
 138                         pins = "gpio16", "gpio17";
 139                         function = "blsp_uart0";
 140                         bias-disable;
 141                 };
 142         };
 143
 144         nand_pins: nand_pins {
 145                 pullups {
 146                         pins = "gpio53", "gpio58", "gpio59";
 147                         function = "qpic";
 148                         bias-pull-up;
 149                 };
 150
 151                 pulldowns {
 152                         pins = "gpio54", "gpio55", "gpio56",
 153                                 "gpio57", "gpio60", "gpio61",
 154                                 "gpio62", "gpio63", "gpio64",
 155                                 "gpio65", "gpio66", "gpio67",
 156                                 "gpio68", "gpio69";
 157                         function = "qpic";
 158                         bias-pull-down;
 159                 };
 160         };
 161
 162         usb-power {
 163                 line-name = "enable USB3 power";
 164                 gpios = <49 GPIO_ACTIVE_HIGH>;
 165                 gpio-hog;
 166                 output-high;
 167         };
 168 };
 169
 170 &nand {
 171         pinctrl-0 = <&nand_pins>;
 172         pinctrl-names = "default";
 173         status = "okay";
 174
 175         nand@0 {
 176                 partitions {
 177                         compatible = "fixed-partitions";
 178                         #address-cells = <1>;
 179                         #size-cells = <1>;
 180
 181                         partition@0 {
 182                                 label = "SBL1";
 183                                 reg = <0x000000 0x80000>;
 184                                 read-only;
 185                         };
 186
 187                         partition@80000 {
 188                                 label = "MIBIB";
 189                                 reg = <0x080000 0x80000>;
 190                                 read-only;
 191                         };
 192
 193                         partition@100000 {
 194                                 label = "QSEE";
 195                                 reg = <0x100000 0x80000>;
 196                                 read-only;
 197                         };
 198
 199                         partition@180000 {
 200                                 label = "CDT";
 201                                 reg = <0x180000 0x40000>;
 202                                 read-only;
 203                         };
 204
 205                         partition@1c0000 {
 206                                 label = "QSEE_B";
 207                                 reg = <0x1c0000 0x80000>;
 208                                 read-only;
 209                         };
 210
 211                         partition@240000 {
 212                                 label = "urlader0";
 213                                 reg = <0x240000 0x40000>;
 214                                 read-only;
 215                         };
 216
 217                         partition@280000 {
 218                                 label = "urlader1";
 219                                 reg = <0x280000 0x40000>;
 220                                 read-only;
 221                         };
 222
 223                         partition@2c0000 {
 224                                 label = "nand-tffs";
 225                                 reg = <0x2c0000 0x840000>;
 226                                 read-only;
 227                         };
 228
 229                         partition@b00000 {
 230                                 /* 'kernel1' in AVM firmware */
 231                                 label = "uboot0";
 232                                 reg = <0xb00000 0x400000>;
 233                         };
 234
 235                         partition@f00000 {
 236                                 /* 'kernel2' in AVM firmware */
 237                                 label = "uboot1";
 238                                 reg = <0xf00000 0x400000>;
 239                         };
 240
 241                         partition@1300000 {
 242                                 label = "ubi";
 243                                 reg = <0x1300000 0x6d00000>;
 244                         };
 245                 };
 246         };
 247 };
 248
 249 &cryptobam {
 250         status = "okay";
 251 };
 252
 253 &blsp_dma {
 254         status = "okay";
 255 };
 256
 257 &blsp1_uart1 {
 258         pinctrl-0 = <&serial_0_pins>;
 259         pinctrl-names = "default";
 260         status = "okay";
 261 };
 262
 263 &usb3_ss_phy {
 264         status = "okay";
 265 };
 266
 267 &usb3_hs_phy {
 268         status = "okay";
 269 };
 270
 271 &qpic_bam {
 272         status = "okay";
 273 };
 274
 275 &wifi0 {
 276         status = "okay";
 277         qcom,ath10k-calibration-variant = "AVM-FRITZBox-7530";
 278 };
 279
 280 &wifi1 {
 281         status = "okay";
 282         qcom,ath10k-calibration-variant = "AVM-FRITZBox-7530";
 283 };
 284
 285 &pcie0 {
 286         status = "okay";
 287
 288         perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>;
 289         wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>;
 290
 291         bridge@0,0 {
 292                 reg = <0x00000000 0 0 0 0>;
 293                 #address-cells = <3>;
 294                 #size-cells = <2>;
 295                 ranges;
 296
 297                 dsl@1,0 {
 298                         compatible = "intel,vrx518";
 299                         status = "okay";
 300                         reg = <0x00010000 0 0 0 0>;
 301                 };
 302         };
 303 };