target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-map-ac2200.dts

   1 // SPDX-License-Identifier: GPL-2.0+ OR MIT
   2 /dts-v1/;
   3
   4 #include "qcom-ipq4019.dtsi"
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7 #include <dt-bindings/soc/qcom,tcsr.h>
   8
   9 / {
  10         model = "ASUS Lyra MAP-AC2200";
  11         compatible = "asus,map-ac2200";
  12
  13         aliases {
  14                 led-boot = &led_blue0;
  15                 led-failsafe = &led_red0;
  16                 led-running = &led_blue0;
  17                 led-upgrade = &led_red0;
  18         };
  19
  20         soc {
  21                 rng@22000 {
  22                         status = "okay";
  23                 };
  24
  25                 mdio@90000 {
  26                         status = "okay";
  27                 };
  28
  29                 ess-psgmii@98000 {
  30                         status = "okay";
  31                 };
  32
  33                 tcsr@1949000 {
  34                         compatible = "qcom,tcsr";
  35                         reg = <0x1949000 0x100>;
  36                         qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
  37                 };
  38
  39                 ess_tcsr@1953000 {
  40                         compatible = "qcom,tcsr";
  41                         reg = <0x1953000 0x1000>;
  42                         qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
  43                 };
  44
  45                 tcsr@1957000 {
  46                         compatible = "qcom,tcsr";
  47                         reg = <0x1957000 0x100>;
  48                         qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
  49                 };
  50
  51                 usb2@60f8800 {
  52                         status = "okay";
  53                 };
  54
  55                 crypto@8e3a000 {
  56                         status = "okay";
  57                 };
  58
  59                 watchdog@b017000 {
  60                         status = "okay";
  61                 };
  62
  63                 ess-switch@c000000 {
  64                         status = "okay";
  65                 };
  66
  67                 edma@c080000 {
  68                         status = "okay";
  69                 };
  70         };
  71
  72         keys {
  73                 compatible = "gpio-keys";
  74
  75                 reset {
  76                         label = "reset";
  77                         gpios = <&tlmm 34 GPIO_ACTIVE_LOW>;
  78                         linux,code = <KEY_RESTART>;
  79                 };
  80
  81                 wps {
  82                         label = "wps";
  83                         gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
  84                         linux,code = <KEY_WPS_BUTTON>;
  85                 };
  86         };
  87 };
  88
  89 &nand {
  90         pinctrl-0 = <&nand_pins>;
  91         pinctrl-names = "default";
  92         status = "okay";
  93
  94         nand@0 {
  95                 partitions {
  96                         compatible = "fixed-partitions";
  97                         #address-cells = <1>;
  98                         #size-cells = <1>;
  99
 100                         partition@0 {
 101                                 label = "SBL1";
 102                                 reg = <0x0 0x80000>;
 103                                 read-only;
 104                         };
 105
 106                         partition@80000 {
 107                                 label = "MIBIB";
 108                                 reg = <0x80000 0x80000>;
 109                                 read-only;
 110                         };
 111
 112                         partition@100000 {
 113                                 label = "QSEE";
 114                                 reg = <0x100000 0x100000>;
 115                                 read-only;
 116                         };
 117
 118                         partition@200000 {
 119                                 label = "CDT";
 120                                 reg = <0x200000 0x80000>;
 121                                 read-only;
 122                         };
 123
 124                         partition@280000 {
 125                                 label = "APPSBL";
 126                                 reg = <0x280000 0x140000>;
 127                                 read-only;
 128                         };
 129
 130                         partition@3c0000 {
 131                                 label = "APPSBLENV";
 132                                 reg = <0x3c0000 0x40000>;
 133                                 read-only;
 134                         };
 135
 136                         partition@400000 {
 137                                 label = "ubi";
 138                                 reg = <0x400000 0x7c00000>;
 139                         };
 140                 };
 141         };
 142 };
 143
 144 &tlmm {
 145         i2c_0_pins: i2c_0_pinmux {
 146                 pinmux {
 147                         function = "blsp_i2c0";
 148                         pins = "gpio20", "gpio21";
 149                         drive-strength = <16>;
 150                         bias-disable;
 151                 };
 152         };
 153
 154         serial_pins: serial_pinmux {
 155                 mux {
 156                         pins = "gpio16", "gpio17";
 157                         function = "blsp_uart0";
 158                         bias-disable;
 159                 };
 160         };
 161
 162         nand_pins: nand_pins {
 163                 pullups {
 164                         pins =  "gpio52", "gpio53", "gpio58",
 165                                 "gpio59";
 166                         function = "qpic";
 167                         bias-pull-up;
 168                 };
 169
 170                 pulldowns {
 171                         pins =  "gpio54", "gpio55", "gpio56",
 172                                 "gpio57", "gpio60", "gpio61",
 173                                 "gpio62", "gpio63", "gpio64",
 174                                 "gpio65", "gpio66", "gpio67",
 175                                 "gpio68", "gpio69";
 176                         function = "qpic";
 177                         bias-pull-down;
 178                 };
 179         };
 180 };
 181
 182 &cryptobam {
 183         status = "okay";
 184 };
 185
 186 &blsp_dma {
 187         status = "okay";
 188 };
 189
 190 &qpic_bam {
 191         status = "okay";
 192 };
 193
 194 &wifi0 {
 195         status = "okay";
 196         qcom,ath10k-calibration-variant = "ASUS-MAP-AC2200";
 197 };
 198
 199 &wifi1 {
 200         status = "okay";
 201         qcom,ath10k-calibration-variant = "ASUS-MAP-AC2200";
 202         ieee80211-freq-limit = <5470000 5875000>;
 203 };
 204
 205 &pcie0 {
 206         status = "okay";
 207         perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>;
 208         wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>;
 209
 210         bridge@0,0 {
 211                 reg = <0x00000000 0 0 0 0>;
 212                 #address-cells = <3>;
 213                 #size-cells = <2>;
 214                 ranges;
 215
 216                 wifi2: wifi@1,0 {
 217                         compatible = "qcom,ath10k";
 218                         status = "okay";
 219                         reg = <0x00010000 0 0 0 0>;
 220                         qcom,ath10k-calibration-variant = "ASUS-MAP-AC2200";
 221                         ieee80211-freq-limit = <5170000 5350000>;
 222                 };
 223         };
 224 };
 225
 226 &usb2_hs_phy {
 227         /* Bluetooth module attached via USB */
 228         status = "okay";
 229 };
 230
 231 &blsp1_i2c3 {
 232         pinctrl-0 = <&i2c_0_pins>;
 233         pinctrl-names = "default";
 234         status = "okay";
 235
 236         led-controller@32 {
 237                 /* 9-channel RGB LED controller */
 238                 compatible = "national,lp5523";
 239                 reg = <0x32>;
 240                 clock-mode = [01];
 241
 242                 led_blue0: blue0 {
 243                         chan-name = "blue0";
 244                         label = "map-ac2200:blue:chan0";
 245                         led-cur = [fa];
 246                         max-cur = [ff];
 247                 };
 248
 249                 blue1 {
 250                         chan-name = "blue1";
 251                         label = "map-ac2200:blue:chan1";
 252                         led-cur = [fa];
 253                         max-cur = [ff];
 254                 };
 255
 256                 blue2 {
 257                         chan-name = "blue2";
 258                         label = "map-ac2200:blue:chan2";
 259                         led-cur = [fa];
 260                         max-cur = [ff];
 261                 };
 262
 263                 led_green0: green0 {
 264                         chan-name = "green0";
 265                         label = "map-ac2200:green:chan0";
 266                         led-cur = [fa];
 267                         max-cur = [ff];
 268                 };
 269
 270                 green1 {
 271                         chan-name = "green1";
 272                         label = "map-ac2200:green:chan1";
 273                         led-cur = [fa];
 274                         max-cur = [ff];
 275                 };
 276
 277                 green2 {
 278                         chan-name = "green2";
 279                         label = "map-ac2200:green:chan2";
 280                         led-cur = [fa];
 281                         max-cur = [ff];
 282                 };
 283
 284                 led_red0: red0 {
 285                         chan-name = "red0";
 286                         label = "map-ac2200:red:chan0";
 287                         led-cur = [fa];
 288                         max-cur = [ff];
 289                 };
 290
 291                 red1 {
 292                         chan-name = "red1";
 293                         label = "map-ac2200:red:chan1";
 294                         led-cur = [fa];
 295                         max-cur = [ff];
 296                 };
 297
 298                 red2 {
 299                         chan-name = "red2";
 300                         label = "map-ac2200:red:chan2";
 301                         led-cur = [fa];
 302                         max-cur = [ff];
 303                 };
 304         };
 305 };
 306
 307 &blsp1_uart1 {
 308         pinctrl-0 = <&serial_pins>;
 309         pinctrl-names = "default";
 310         status = "okay";
 311 };