target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-eap1300.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later
   2
   3 #include "qcom-ipq4019.dtsi"
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6 #include <dt-bindings/soc/qcom,tcsr.h>
   7
   8 / {
   9         model = "EnGenius EAP1300";
  10         compatible = "engenius,eap1300";
  11
  12         soc {
  13                 rng@22000 {
  14                         status = "okay";
  15                 };
  16
  17                 mdio@90000 {
  18                         status = "okay";
  19                 };
  20
  21                 ess-psgmii@98000 {
  22                         status = "okay";
  23                 };
  24
  25                 tcsr@1949000 {
  26                         compatible = "qcom,tcsr";
  27                         reg = <0x1949000 0x100>;
  28                         qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
  29                 };
  30
  31                 ess_tcsr@1953000 {
  32                         compatible = "qcom,tcsr";
  33                         reg = <0x1953000 0x1000>;
  34                         qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
  35                 };
  36
  37                 tcsr@1957000 {
  38                         compatible = "qcom,tcsr";
  39                         reg = <0x1957000 0x100>;
  40                         qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
  41                 };
  42
  43                 crypto@8e3a000 {
  44                         status = "okay";
  45                 };
  46
  47                 watchdog@b017000 {
  48                         status = "okay";
  49                 };
  50
  51                 ess-switch@c000000 {
  52                         status = "okay";
  53                 };
  54
  55                 edma@c080000 {
  56                         status = "okay";
  57                 };
  58         };
  59
  60         keys {
  61                 compatible = "gpio-keys";
  62
  63                 reset {
  64                         label = "reset";
  65                         gpios = <&tlmm 18 GPIO_ACTIVE_HIGH>;
  66                         linux,code = <KEY_RESTART>;
  67                 };
  68         };
  69
  70         aliases {
  71                 led-boot = &power;
  72                 led-failsafe = &power;
  73                 led-running = &power;
  74                 led-upgrade = &power;
  75         };
  76
  77         leds {
  78                 compatible = "gpio-leds";
  79
  80                 power: orange {
  81                         label = "eap1300:orange:power";
  82                         gpios = <&tlmm 58 GPIO_ACTIVE_LOW>;
  83                 };
  84
  85                 lan {
  86                         label = "eap1300:blue:lan";
  87                         gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
  88                 };
  89
  90                 mesh {
  91                         label = "eap1300:blue:mesh";
  92                         gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>;
  93                 };
  94
  95                 wlan2g {
  96                         label = "eap1300:blue:wlan2g";
  97                         gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
  98                 };
  99
 100                 wlan5g {
 101                         label = "eap1300:yellow:wlan5g";
 102                         gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
 103                 };
 104         };
 105 };
 106
 107 &tlmm {
 108         serial_pins: serial_pinmux {
 109                 mux {
 110                         pins = "gpio60", "gpio61";
 111                         function = "blsp_uart0";
 112                         bias-disable;
 113                 };
 114         };
 115
 116         spi_0_pins: spi_0_pinmux {
 117                 pin {
 118                         function = "blsp_spi0";
 119                         pins = "gpio54", "gpio55", "gpio56", "gpio57";
 120                         drive-strength = <12>;
 121                         bias-disable;
 122                 };
 123                 pin_cs {
 124                         function = "gpio";
 125                         pins = "gpio54";
 126                         drive-strength = <2>;
 127                         bias-disable;
 128                         output-high;
 129                 };
 130         };
 131 };
 132
 133 &blsp_dma {
 134         status = "okay";
 135 };
 136
 137 &blsp1_spi1 {
 138         pinctrl-0 = <&spi_0_pins>;
 139         pinctrl-names = "default";
 140         status = "okay";
 141         cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
 142
 143         m25p80@0 {
 144                 compatible = "jedec,spi-nor";
 145                 reg = <0>;
 146                 spi-max-frequency = <24000000>;
 147                 partitions {
 148                         compatible = "fixed-partitions";
 149                         #address-cells = <1>;
 150                         #size-cells = <1>;
 151
 152                         partition@0 {
 153                                 label = "0:SBL1";
 154                                 reg = <0x00000000 0x00040000>;
 155                                 read-only;
 156                         };
 157                         partition1@40000 {
 158                                 label = "0:MIBIB";
 159                                 reg = <0x00040000 0x00020000>;
 160                                 read-only;
 161                         };
 162                         partition2@60000 {
 163                                 label = "0:QSEE";
 164                                 reg = <0x00060000 0x00060000>;
 165                                 read-only;
 166                         };
 167                         partition3@c0000 {
 168                                 label = "0:CDT";
 169                                 reg = <0x000c0000 0x00010000>;
 170                                 read-only;
 171                         };
 172                         partition4@d0000 {
 173                                 label = "0:DDRPARAMS";
 174                                 reg = <0x000d0000 0x00010000>;
 175                                 read-only;
 176                         };
 177                         partition5@e0000 {
 178                                 label = "0:APPSBLENV";
 179                                 reg = <0x000e0000 0x00010000>;
 180                                 read-only;
 181                         };
 182                         partition6@f0000 {
 183                                 label = "0:APPSBL";
 184                                 reg = <0x000f0000 0x00090000>;
 185                                 read-only;
 186                         };
 187                         partition7@180000 {
 188                                 label = "0:ART";
 189                                 reg = <0x00180000 0x00010000>;
 190                                 read-only;
 191                         };
 192                         partition8@190000 {
 193                                 compatible = "denx,fit";
 194                                 label = "firmware";
 195                                 reg = <0x190000 0x1dc0000>;
 196                         };
 197                         partition9@1f50000 {
 198                                 label = "u-boot-env";
 199                                 reg = <0x01f50000 0x00010000>;
 200                         };
 201                         partition10@1f60000 {
 202                                 label = "userconfig";
 203                                 reg = <0x01f60000 0x000a0000>;
 204                         };
 205                 };
 206         };
 207 };
 208
 209 &blsp1_uart1 {
 210         pinctrl-0 = <&serial_pins>;
 211         pinctrl-names = "default";
 212         status = "okay";
 213 };
 214
 215 &cryptobam {
 216         status = "okay";
 217 };
 218
 219 &gmac0 {
 220         vlan_tag = <2 0x20>;
 221 };
 222
 223 &gmac1 {
 224         vlan_tag = <1 0x10>;
 225 };
 226
 227 &wifi0 {
 228         status = "okay";
 229         qcom,ath10k-calibration-variant = "EnGenius-EAP1300";
 230 };
 231
 232 &wifi1 {
 233         status = "okay";
 234         qcom,ath10k-calibration-variant = "EnGenius-EAP1300";
 235 };