target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-eap2200.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include "qcom-ipq4019.dtsi"
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         model = "EnGenius EAP2200";
   9         compatible = "engenius,eap2200";
  10
  11         aliases {
  12                 led-boot = &led_power;
  13                 led-failsafe = &led_power;
  14                 led-running = &led_power;
  15                 led-upgrade = &led_power;
  16         };
  17
  18         keys {
  19                 compatible = "gpio-keys";
  20
  21                 wps {
  22                         label = "wps";
  23                         gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
  24                         linux,code = <KEY_WPS_BUTTON>;
  25                 };
  26         };
  27
  28         leds {
  29                 compatible = "gpio-leds";
  30
  31                 led_power: power {
  32                         label = "eap2200:amber:power";
  33                         gpios = <&tlmm 43 GPIO_ACTIVE_LOW>;
  34                 };
  35
  36                 lan1 {
  37                         label = "eap2200:blue:lan1";
  38                         gpios = <&tlmm 44 GPIO_ACTIVE_LOW>;
  39                 };
  40
  41                 lan2 {
  42                         label = "eap2200:blue:lan2";
  43                         gpios = <&tlmm 45 GPIO_ACTIVE_LOW>;
  44                 };
  45
  46                 wlan2g {
  47                         label = "eap2200:blue:wlan2g";
  48                         gpios = <&tlmm 46 GPIO_ACTIVE_LOW>;
  49                         linux,default-trigger = "phy0tpt";
  50                 };
  51
  52                 wlan5g {
  53                         label = "eap2200:yellow:wlan5g";
  54                         gpios = <&tlmm 47 GPIO_ACTIVE_LOW>;
  55                         linux,default-trigger = "phy1tpt";
  56                 };
  57
  58                 wlan5g2 {
  59                         label = "eap2200:yellow:wlan5g2";
  60                         gpios = <&tlmm 48 GPIO_ACTIVE_LOW>;
  61                         linux,default-trigger = "phy2tpt";
  62                 };
  63
  64                 mode {
  65                         label = "eap2200:blue:mode";
  66                         gpios = <&tlmm 50 GPIO_ACTIVE_LOW>;
  67                 };
  68         };
  69
  70         soc {
  71                 rng@22000 {
  72                         status = "okay";
  73                 };
  74
  75                 mdio@90000 {
  76                         status = "okay";
  77                 };
  78
  79                 ess-psgmii@98000 {
  80                         status = "okay";
  81                 };
  82
  83                 crypto@8e3a000 {
  84                         status = "okay";
  85                 };
  86
  87                 watchdog@b017000 {
  88                         status = "okay";
  89                 };
  90
  91                 ess-switch@c000000 {
  92                         status = "okay";
  93                         switch_lan_bmp = <0x10>;
  94                 };
  95
  96                 edma@c080000 {
  97                         status = "okay";
  98                 };
  99         };
 100 };
 101
 102 &blsp_dma {
 103         status = "okay";
 104 };
 105
 106 &blsp1_spi1 {
 107         pinctrl-0 = <&spi_0_pins>;
 108         pinctrl-names = "default";
 109         status = "okay";
 110         cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
 111
 112         flash@0 {
 113                 #address-cells = <1>;
 114                 #size-cells = <1>;
 115                 compatible = "jedec,spi-nor";
 116                 reg = <0>;
 117                 spi-max-frequency = <24000000>;
 118                 partitions {
 119                         compatible = "fixed-partitions";
 120                         #address-cells = <1>;
 121                         #size-cells = <1>;
 122
 123                         partition0@0 {
 124                                 label = "0:SBL1";
 125                                 reg = <0x00000000 0x00040000>;
 126                                 read-only;
 127                         };
 128                         partition1@40000 {
 129                                 label = "0:MIBIB";
 130                                 reg = <0x00040000 0x00020000>;
 131                                 read-only;
 132                         };
 133                         partition2@60000 {
 134                                 label = "0:QSEE";
 135                                 reg = <0x00060000 0x00060000>;
 136                                 read-only;
 137                         };
 138                         partition3@c0000 {
 139                                 label = "0:CDT";
 140                                 reg = <0x000c0000 0x00010000>;
 141                                 read-only;
 142                         };
 143                         partition4@d0000 {
 144                                 label = "0:DDRPARAMS";
 145                                 reg = <0x000d0000 0x00010000>;
 146                                 read-only;
 147                         };
 148                         partition5@e0000 {
 149                                 label = "0:APPSBLENV";
 150                                 reg = <0x000e0000 0x00010000>;
 151                                 read-only;
 152                         };
 153                         partition6@f0000 {
 154                                 label = "0:APPSBL";
 155                                 reg = <0x000f0000 0x00080000>;
 156                                 read-only;
 157                         };
 158                         partition7@170000 {
 159                                 label = "0:ART";
 160                                 reg = <0x00170000 0x00010000>;
 161                                 read-only;
 162                         };
 163                 };
 164         };
 165 };
 166
 167 &blsp1_uart1 {
 168         pinctrl-0 = <&serial_0_pins>;
 169         pinctrl-names = "default";
 170         status = "okay";
 171 };
 172
 173 &cryptobam {
 174         status = "okay";
 175 };
 176
 177 &gmac0 {
 178         vlan_tag = <1 0x10>;
 179 };
 180
 181 &nand {
 182         pinctrl-0 = <&nand_pins>;
 183         pinctrl-names = "default";
 184         status = "okay";
 185
 186         nand@0 {
 187                 partitions {
 188                         compatible = "fixed-partitions";
 189                         #address-cells = <1>;
 190                         #size-cells = <1>;
 191
 192                         partition@0 {
 193                                 label = "rootfs1";
 194                                 reg = <0x00000000 0x04000000>;
 195                         };
 196                         partition@40000000 {
 197                                 label = "ubi";
 198                                 reg = <0x04000000 0x04000000>;
 199                         };
 200
 201                 };
 202         };
 203 };
 204
 205 &pcie0 {
 206         status = "okay";
 207         perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>;
 208         wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>;
 209
 210         bridge@0,0 {
 211                 reg = <0x00000000 0 0 0 0>;
 212                 #address-cells = <3>;
 213                 #size-cells = <2>;
 214                 ranges;
 215
 216                 wifi2: wifi@1,0 {
 217                         compatible = "qcom,ath10k";
 218                         reg = <0x00010000 0 0 0 0>;
 219                         ieee80211-freq-limit = <5470000 5875000>;
 220                         qcom,ath10k-calibration-variant = "EnGenius-EAP2200";
 221                 };
 222         };
 223 };
 224
 225 &qpic_bam {
 226         status = "okay";
 227 };
 228
 229 &tlmm {
 230         nand_pins: nand_pins {
 231                 pullups {
 232                         pins = "gpio53", "gpio58", "gpio59";
 233                         function = "qpic";
 234                         bias-pull-up;
 235                 };
 236
 237                 pulldowns {
 238                         pins = "gpio54", "gpio55", "gpio56",
 239                                 "gpio57", "gpio60", "gpio61",
 240                                 "gpio62", "gpio63", "gpio64",
 241                                 "gpio65", "gpio66", "gpio67",
 242                                 "gpio68", "gpio69";
 243                         function = "qpic";
 244                         bias-pull-down;
 245                 };
 246         };
 247
 248         serial_0_pins: serial_pinmux {
 249                 mux {
 250                         pins = "gpio16", "gpio17";
 251                         function = "blsp_uart0";
 252                         bias-disable;
 253                 };
 254         };
 255
 256         spi_0_pins: spi_0_pinmux {
 257                 pinmux {
 258                         function = "blsp_spi0";
 259                         pins = "gpio13", "gpio14", "gpio15";
 260                         drive-strength = <12>;
 261                         bias-disable;
 262                 };
 263                 pinmux_cs {
 264                         function = "gpio";
 265                         pins = "gpio12";
 266                         drive-strength = <2>;
 267                         bias-disable;
 268                         output-high;
 269                 };
 270         };
 271 };
 272
 273 &wifi0 {
 274         status = "okay";
 275         qcom,ath10k-calibration-variant = "EnGenius-EAP2200";
 276 };
 277
 278 &wifi1 {
 279         status = "okay";
 280         ieee80211-freq-limit = <5170000 5350000>;
 281         qcom,ath10k-calibration-variant = "EnGenius-EAP2200";
 282 };