target/linux/ipq40xx/image/Makefile

   1 include $(TOPDIR)/rules.mk
   2 include $(INCLUDE_DIR)/image.mk
   3
   4 define Device/Default
   5         PROFILES := Default
   6         KERNEL_DEPENDS = $$(wildcard $(DTS_DIR)/$$(DEVICE_DTS).dts)
   7         KERNEL_INITRAMFS_PREFIX := $$(IMG_PREFIX)-$(1)-initramfs
   8         KERNEL_PREFIX := $$(IMAGE_PREFIX)
   9         KERNEL_LOADADDR := 0x80208000
  10         SUPPORTED_DEVICES := $(subst _,$(comma),$(1))
  11         IMAGE/sysupgrade.bin = sysupgrade-tar | append-metadata
  12         IMAGE/sysupgrade.bin/squashfs :=
  13 endef
  14
  15 define Device/FitImage
  16         KERNEL_SUFFIX := -fit-uImage.itb
  17         KERNEL = kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb
  18         KERNEL_NAME := Image
  19 endef
  20
  21 define Device/FitImageLzma
  22         KERNEL_SUFFIX := -fit-uImage.itb
  23         KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb
  24         KERNEL_NAME := Image
  25 endef
  26
  27 define Device/UbiFit
  28         KERNEL_IN_UBI := 1
  29         IMAGES := nand-factory.ubi nand-sysupgrade.bin
  30         IMAGE/nand-factory.ubi := append-ubi
  31         IMAGE/nand-sysupgrade.bin := sysupgrade-tar | append-metadata
  32 endef
  33
  34 define Device/DniImage
  35         KERNEL_SUFFIX := -fit-uImage.itb
  36         KERNEL = kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb
  37         KERNEL_NAME := Image
  38         NETGEAR_BOARD_ID :=
  39         NETGEAR_HW_ID :=
  40         IMAGES := factory.img sysupgrade.bin
  41         IMAGE/factory.img := append-kernel | pad-offset 64k 64 | append-uImage-fakeroot-hdr | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | netgear-dni
  42         IMAGE/sysupgrade.bin := append-kernel | pad-offset 64k 64 | append-uImage-fakeroot-hdr | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | append-metadata
  43 endef
  44 DEVICE_VARS += NETGEAR_BOARD_ID NETGEAR_HW_ID
  45
  46
  47 define Device/8dev_jalapeno
  48         $(call Device/FitImage)
  49         $(call Device/UbiFit)
  50         DEVICE_DTS := qcom-ipq4018-jalapeno
  51         BLOCKSIZE := 128k
  52         PAGESIZE := 2048
  53         DEVICE_TITLE := 8devices Jalapeno
  54         DEVICE_PACKAGES := ipq-wifi-8dev_jalapeno
  55 endef
  56 TARGET_DEVICES += 8dev_jalapeno
  57
  58 define Device/asus_rt-ac58u
  59         $(call Device/FitImageLzma)
  60         DEVICE_DTS := qcom-ipq4018-rt-ac58u
  61         BLOCKSIZE := 128k
  62         PAGESIZE := 2048
  63         DTB_SIZE := 65536
  64         DEVICE_TITLE := Asus RT-AC58U
  65         IMAGE_SIZE := 20439364
  66         FILESYSTEMS := squashfs
  67 #       Someone - in their infinite wisdom - decided to put the firmware
  68 #       version in front of the image name \03\00\00\04 => Version 3.0.0.4
  69 #       Since u-boot works with strings we either need another fixup step
  70 #       to add a version... or we are very careful not to add '\0' into that
  71 #       string and call it a day.... Yeah, we do the latter!
  72         UIMAGE_NAME:=$(shell echo -e '\03\01\01\01RT-AC58U')
  73         IMAGES := sysupgrade.bin
  74         DEVICE_PACKAGES := ipq-wifi-asus_rt-ac58u kmod-usb-ledtrig-usbport
  75 endef
  76 TARGET_DEVICES += asus_rt-ac58u
  77
  78 define Device/avm_fritzbox-4040
  79         $(call Device/FitImageLzma)
  80         DEVICE_DTS := qcom-ipq4018-fritz4040
  81         BOARD_NAME := fritz4040
  82         DEVICE_TITLE := AVM Fritz!Box 4040
  83         IMAGE_SIZE := 29753344
  84         IMAGES = sysupgrade.bin
  85         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
  86         DEVICE_PACKAGES := ipq-wifi-avm_fritzbox-4040 fritz-tffs fritz-caldata u-boot-fritz4040
  87 endef
  88 TARGET_DEVICES += avm_fritzbox-4040
  89
  90 define Device/compex_wpj428
  91         $(call Device/FitImage)
  92         DEVICE_DTS := qcom-ipq4028-wpj428
  93         DEVICE_DTS_CONFIG := config@4
  94         BLOCKSIZE := 64k
  95         DEVICE_TITLE := Compex WPJ428
  96         IMAGE_SIZE := 31232k
  97         KERNEL_SIZE := 4096k
  98         IMAGES = sysupgrade.bin
  99         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
 100         DEVICE_PACKAGES := kmod-gpio-beeper
 101 endef
 102 TARGET_DEVICES += compex_wpj428
 103
 104 define Device/glinet_gl-b1300
 105         $(call Device/FitImage)
 106         DEVICE_TITLE := GL.iNet GL-B1300
 107         BOARD_NAME := gl-b1300
 108         DEVICE_DTS := qcom-ipq4029-gl-b1300
 109         KERNEL_SIZE := 4096k
 110         IMAGE_SIZE := 26624k
 111         IMAGES := sysupgrade.bin
 112         IMAGE/sysupgrade.bin := append-kernel |append-rootfs | pad-rootfs | append-metadata
 113         DEVICE_PACKAGES := ipq-wifi-glinet_gl-b1300
 114 endef
 115 TARGET_DEVICES += glinet_gl-b1300
 116
 117 define Device/meraki_mr33
 118         $(call Device/FitImage)
 119         DEVICE_DTS := qcom-ipq4029-mr33
 120         BLOCKSIZE := 131072
 121         PAGESIZE := 2048
 122         DEVICE_TITLE := Cisco Meraki MR33
 123         IMAGES = sysupgrade.bin
 124         DEVICE_PACKAGES := -swconfig ipq-wifi-meraki_mr33 ath10k-firmware-qca9887
 125 endef
 126 TARGET_DEVICES += meraki_mr33
 127
 128 define Device/netgear_ex61x0v2
 129         $(call Device/DniImage)
 130         KERNEL_SIZE := 3080192
 131         DEVICE_DTS_CONFIG := config@4
 132         DEVICE_PACKAGES := ipq-wifi-netgear_ex61x0v2
 133         NETGEAR_BOARD_ID := EX6150v2series
 134         NETGEAR_HW_ID := 29765285+16+0+128+2x2
 135 endef
 136
 137 define Device/netgear_ex6100v2
 138         $(call Device/netgear_ex61x0v2)
 139         DEVICE_DTS := qcom-ipq4018-ex6100v2
 140         DEVICE_TITLE := Netgear EX6100v2
 141 endef
 142 TARGET_DEVICES += netgear_ex6100v2
 143
 144 define Device/netgear_ex6150v2
 145         $(call Device/netgear_ex61x0v2)
 146         DEVICE_DTS := qcom-ipq4018-ex6150v2
 147         DEVICE_TITLE := Netgear EX6150v2
 148 endef
 149 TARGET_DEVICES += netgear_ex6150v2
 150
 151 define Device/openmesh_a42
 152         $(call Device/FitImageLzma)
 153         DEVICE_DTS := qcom-ipq4018-a42
 154         DEVICE_DTS_CONFIG := config@om.a42
 155         BLOCKSIZE := 64k
 156         DEVICE_TITLE := OpenMesh A42
 157         KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
 158         IMAGE_SIZE := 15616k
 159         IMAGES = factory.bin sysupgrade.bin
 160         IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=A42
 161         IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
 162         DEVICE_PACKAGES := uboot-envtools
 163 endef
 164 TARGET_DEVICES += openmesh_a42
 165
 166 define Device/qcom_ap-dk01.1-c1
 167         DEVICE_TITLE := QCA AP-DK01.1-C1
 168         BOARD_NAME := ap-dk01.1-c1
 169         DEVICE_DTS := qcom-ipq4019-ap.dk01.1-c1
 170         KERNEL_INSTALL := 1
 171         KERNEL_SIZE := 4096k
 172         IMAGE_SIZE := 26624k
 173         $(call Device/FitImage)
 174         IMAGES := sysupgrade.bin
 175         IMAGE/sysupgrade.bin := append-kernel | pad-to $$$${KERNEL_SIZE} | append-rootfs | pad-rootfs | append-metadata
 176 endef
 177 TARGET_DEVICES += qcom_ap-dk01.1-c1
 178
 179 define Device/qcom_ap-dk04.1-c1
 180         $(call Device/FitImage)
 181         $(call Device/UbiFit)
 182         DEVICE_DTS := qcom-ipq4019-ap.dk04.1-c1
 183         KERNEL_INSTALL := 1
 184         KERNEL_SIZE := 4048k
 185         BLOCKSIZE := 128k
 186         PAGESIZE := 2048
 187         BOARD_NAME := ap-dk04.1-c1
 188         DEVICE_TITLE := QCA AP-DK04.1-C1
 189 endef
 190 TARGET_DEVICES += qcom_ap-dk04.1-c1
 191
 192 $(eval $(call BuildImage))