target/linux/ipq40xx/image/Makefile

   1 include $(TOPDIR)/rules.mk
   2 include $(INCLUDE_DIR)/image.mk
   3
   4 define Device/Default
   5         PROFILES := Default
   6         KERNEL_DEPENDS = $$(wildcard $(DTS_DIR)/$$(DEVICE_DTS).dts)
   7         KERNEL_INITRAMFS_PREFIX := $$(IMG_PREFIX)-$(1)-initramfs
   8         KERNEL_PREFIX := $$(IMAGE_PREFIX)
   9         KERNEL_LOADADDR := 0x80208000
  10         SUPPORTED_DEVICES := $(subst _,$(comma),$(1))
  11         IMAGE/sysupgrade.bin = sysupgrade-tar | append-metadata
  12         IMAGE/sysupgrade.bin/squashfs :=
  13 endef
  14
  15 define Device/FitImage
  16         KERNEL_SUFFIX := -fit-uImage.itb
  17         KERNEL = kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb
  18         KERNEL_NAME := Image
  19 endef
  20
  21 define Device/FitImageLzma
  22         KERNEL_SUFFIX := -fit-uImage.itb
  23         KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb
  24         KERNEL_NAME := Image
  25 endef
  26
  27 define Device/UbiFit
  28         KERNEL_IN_UBI := 1
  29         IMAGES := nand-factory.ubi nand-sysupgrade.bin
  30         IMAGE/nand-factory.ubi := append-ubi
  31         IMAGE/nand-sysupgrade.bin := sysupgrade-tar | append-metadata
  32 endef
  33
  34 define Device/DniImage
  35         KERNEL_SUFFIX := -fit-uImage.itb
  36         KERNEL = kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb
  37         KERNEL_NAME := Image
  38         NETGEAR_BOARD_ID :=
  39         NETGEAR_HW_ID :=
  40         IMAGES := factory.img sysupgrade.bin
  41         IMAGE/factory.img := append-kernel | pad-offset 64k 64 | append-uImage-fakehdr filesystem | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | netgear-dni
  42         IMAGE/sysupgrade.bin := append-kernel | pad-offset 64k 64 | append-uImage-fakehdr filesystem | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | append-metadata
  43 endef
  44 DEVICE_VARS += NETGEAR_BOARD_ID NETGEAR_HW_ID
  45
  46
  47 define Device/8dev_jalapeno
  48         $(call Device/FitImage)
  49         $(call Device/UbiFit)
  50         DEVICE_DTS := qcom-ipq4018-jalapeno
  51         BLOCKSIZE := 128k
  52         PAGESIZE := 2048
  53         DEVICE_TITLE := 8devices Jalapeno
  54 endef
  55 TARGET_DEVICES += 8dev_jalapeno
  56
  57 define Device/asus_rt-ac58u
  58         $(call Device/FitImageLzma)
  59         DEVICE_DTS := qcom-ipq4018-rt-ac58u
  60         BLOCKSIZE := 128k
  61         PAGESIZE := 2048
  62         DTB_SIZE := 65536
  63         DEVICE_TITLE := Asus RT-AC58U
  64         IMAGE_SIZE := 20439364
  65         FILESYSTEMS := squashfs
  66 #       Someone - in their infinite wisdom - decided to put the firmware
  67 #       version in front of the image name \03\00\00\04 => Version 3.0.0.4
  68 #       Since u-boot works with strings we either need another fixup step
  69 #       to add a version... or we are very careful not to add '\0' into that
  70 #       string and call it a day.... Yeah, we do the latter!
  71         UIMAGE_NAME:=$(shell echo -e '\03\01\01\01RT-AC58U')
  72         IMAGES := sysupgrade.bin
  73         DEVICE_PACKAGES := kmod-usb-ledtrig-usbport
  74 endef
  75 TARGET_DEVICES += asus_rt-ac58u
  76
  77 define Device/avm_fritzbox-4040
  78         $(call Device/FitImageLzma)
  79         DEVICE_DTS := qcom-ipq4018-fritz4040
  80         BOARD_NAME := fritz4040
  81         DEVICE_TITLE := AVM Fritz!Box 4040
  82         IMAGE_SIZE := 29753344
  83         UBOOT_PATH := $$(BIN_DIR)/u-boot-fritz4040/uboot-fritz4040.bin
  84         UBOOT_PARTITION_SIZE := 524288
  85         IMAGES = eva.bin sysupgrade.bin
  86         IMAGE/eva.bin := append-uboot | pad-to $$$$(UBOOT_PARTITION_SIZE) | append-kernel | append-rootfs | pad-rootfs
  87         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
  88         DEVICE_PACKAGES := fritz-tffs fritz-caldata u-boot-fritz4040
  89 endef
  90 TARGET_DEVICES += avm_fritzbox-4040
  91
  92 define Device/compex_wpj428
  93         $(call Device/FitImage)
  94         DEVICE_DTS := qcom-ipq4028-wpj428
  95         DEVICE_DTS_CONFIG := config@4
  96         BLOCKSIZE := 64k
  97         DEVICE_TITLE := Compex WPJ428
  98         IMAGE_SIZE := 31232k
  99         KERNEL_SIZE := 4096k
 100         IMAGES = sysupgrade.bin
 101         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
 102         DEVICE_PACKAGES := kmod-gpio-beeper
 103 endef
 104 TARGET_DEVICES += compex_wpj428
 105
 106 define Device/glinet_gl-b1300
 107         $(call Device/FitImage)
 108         DEVICE_TITLE := GL.iNet GL-B1300
 109         BOARD_NAME := gl-b1300
 110         DEVICE_DTS := qcom-ipq4029-gl-b1300
 111         KERNEL_SIZE := 4096k
 112         IMAGE_SIZE := 26624k
 113         IMAGES := sysupgrade.bin
 114         IMAGE/sysupgrade.bin := append-kernel |append-rootfs | pad-rootfs | append-metadata
 115 endef
 116 TARGET_DEVICES += glinet_gl-b1300
 117
 118 define Device/meraki_mr33
 119         $(call Device/FitImage)
 120         DEVICE_DTS := qcom-ipq4029-mr33
 121         BLOCKSIZE := 131072
 122         PAGESIZE := 2048
 123         DEVICE_TITLE := Cisco Meraki MR33
 124         IMAGES = sysupgrade.bin
 125         DEVICE_PACKAGES := -swconfig ath10k-firmware-qca9887
 126 endef
 127 TARGET_DEVICES += meraki_mr33
 128
 129 define Device/netgear_ex61x0v2
 130         $(call Device/DniImage)
 131         KERNEL_SIZE := 3080192
 132         DEVICE_DTS_CONFIG := config@4
 133         NETGEAR_BOARD_ID := EX6150v2series
 134         NETGEAR_HW_ID := 29765285+16+0+128+2x2
 135 endef
 136
 137 define Device/netgear_ex6100v2
 138         $(call Device/netgear_ex61x0v2)
 139         DEVICE_DTS := qcom-ipq4018-ex6100v2
 140         DEVICE_TITLE := Netgear EX6100v2
 141 endef
 142 TARGET_DEVICES += netgear_ex6100v2
 143
 144 define Device/netgear_ex6150v2
 145         $(call Device/netgear_ex61x0v2)
 146         DEVICE_DTS := qcom-ipq4018-ex6150v2
 147         DEVICE_TITLE := Netgear EX6150v2
 148 endef
 149 TARGET_DEVICES += netgear_ex6150v2
 150
 151 define Device/openmesh_a42
 152         $(call Device/FitImageLzma)
 153         DEVICE_DTS := qcom-ipq4018-a42
 154         DEVICE_DTS_CONFIG := config@om.a42
 155         BLOCKSIZE := 64k
 156         DEVICE_TITLE := OpenMesh A42
 157         KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
 158         IMAGE_SIZE := 15616k
 159         IMAGES = factory.bin sysupgrade.bin
 160         IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=A42
 161         IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
 162         DEVICE_PACKAGES := uboot-envtools
 163 endef
 164 TARGET_DEVICES += openmesh_a42
 165
 166 define Device/openmesh_a62
 167         $(call Device/FitImageLzma)
 168         DEVICE_DTS := qcom-ipq4019-a62
 169         DEVICE_DTS_CONFIG := config@om.a62
 170         BLOCKSIZE := 64k
 171         DEVICE_TITLE := OpenMesh A62
 172         KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
 173         IMAGE_SIZE := 15552k
 174         IMAGES = factory.bin sysupgrade.bin
 175         IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=A62
 176         IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
 177         DEVICE_PACKAGES := ath10k-firmware-qca9888 uboot-envtools
 178 endef
 179
 180 TARGET_DEVICES += openmesh_a62
 181
 182 define Device/qcom_ap-dk01.1-c1
 183         DEVICE_TITLE := QCA AP-DK01.1-C1
 184         BOARD_NAME := ap-dk01.1-c1
 185         DEVICE_DTS := qcom-ipq4019-ap.dk01.1-c1
 186         KERNEL_INSTALL := 1
 187         KERNEL_SIZE := 4096k
 188         IMAGE_SIZE := 26624k
 189         $(call Device/FitImage)
 190         IMAGES := sysupgrade.bin
 191         IMAGE/sysupgrade.bin := append-kernel | pad-to $$$${KERNEL_SIZE} | append-rootfs | pad-rootfs | append-metadata
 192 endef
 193 TARGET_DEVICES += qcom_ap-dk01.1-c1
 194
 195 define Device/qcom_ap-dk04.1-c1
 196         $(call Device/FitImage)
 197         $(call Device/UbiFit)
 198         DEVICE_DTS := qcom-ipq4019-ap.dk04.1-c1
 199         KERNEL_INSTALL := 1
 200         KERNEL_SIZE := 4048k
 201         BLOCKSIZE := 128k
 202         PAGESIZE := 2048
 203         BOARD_NAME := ap-dk04.1-c1
 204         DEVICE_TITLE := QCA AP-DK04.1-C1
 205 endef
 206 TARGET_DEVICES += qcom_ap-dk04.1-c1
 207
 208 define Device/zyxel_wre6606
 209         $(call Device/FitImage)
 210         DEVICE_TITLE := ZyXEL WRE6606
 211         DEVICE_DTS_CONFIG := config@4
 212         DEVICE_DTS := qcom-ipq4018-wre6606
 213         DEVICE_PACKAGES := ipq-wifi-zyxel_wre6606
 214         IMAGES := sysupgrade.bin
 215         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
 216 endef
 217 TARGET_DEVICES += zyxel_wre6606
 218
 219 $(eval $(call BuildImage))