target/linux/ipq40xx/patches-4.14/701-dts-ipq4019-add-mdio-node.patch

   1 From 09ed737593f71bcca08a537a6c15264a1a6add08 Mon Sep 17 00:00:00 2001
   2 From: Christian Lamparter <chunkeey@gmail.com>
   3 Date: Sun, 20 Nov 2016 01:10:33 +0100
   4 Subject: [PATCH] dts: ipq4019: add mdio node for ethernet
   5
   6 This patch adds the mdio device-tree node.
   7 This is where the switch is connected to, so it's needed
   8 for the ethernet interfaces.
   9
  10 Note: The driver isn't anywhere close to be upstream,
  11 so the info might change.
  12 ---
  13  arch/arm/boot/dts/qcom-ipq4019.dtsi | 28 ++++++++++++++++++++++++++++
  14  1 file changed, 28 insertions(+)
  15
  16 --- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
  17 +++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
  18 @@ -539,6 +539,34 @@
  19                         status = "disabled";
  20                 };
  21
  22 +               mdio@90000 {
  23 +                       #address-cells = <1>;
  24 +                       #size-cells = <0>;
  25 +                       compatible = "qcom,ipq4019-mdio";
  26 +                       reg = <0x90000 0x64>;
  27 +                       status = "disabled";
  28 +
  29 +                       ethernet-phy@0 {
  30 +                               reg = <0>;
  31 +                       };
  32 +
  33 +                       ethernet-phy@1 {
  34 +                               reg = <1>;
  35 +                       };
  36 +
  37 +                       ethernet-phy@2 {
  38 +                               reg = <2>;
  39 +                       };
  40 +
  41 +                       ethernet-phy@3 {
  42 +                               reg = <3>;
  43 +                       };
  44 +
  45 +                       ethernet-phy@4 {
  46 +                               reg = <4>;
  47 +                       };
  48 +               };
  49 +
  50                 usb3_ss_phy: ssphy@9a000 {
  51                         compatible = "qca,uni-ssphy";
  52                         reg = <0x9a000 0x800>;