514ddb50147adde79729d4b69e183c5c69aff1d9
[openwrt/openwrt.git] / target / linux / ipq806x / files-4.14 / arch / arm / boot / dts / qcom-ipq8064-d7800.dts
1 #include "qcom-ipq8064-v2.0.dtsi"
2
3 #include <dt-bindings/input/input.h>
4
5 / {
6 model = "Netgear Nighthawk X4 D7800";
7 compatible = "netgear,d7800", "qcom,ipq8064";
8
9 memory@0 {
10 reg = <0x42000000 0xe000000>;
11 device_type = "memory";
12 };
13
14 reserved-memory {
15 #address-cells = <1>;
16 #size-cells = <1>;
17 ranges;
18 rsvd@41200000 {
19 reg = <0x41200000 0x300000>;
20 no-map;
21 };
22 };
23
24 aliases {
25 serial0 = &gsbi4_serial;
26 mdio-gpio0 = &mdio0;
27
28 led-boot = &power_white;
29 led-failsafe = &power_amber;
30 led-running = &power_white;
31 led-upgrade = &power_amber;
32 };
33
34 chosen {
35 bootargs = "rootfstype=squashfs noinitrd";
36 linux,stdout-path = "serial0:115200n8";
37 };
38
39 soc {
40 pinmux@800000 {
41 button_pins: button_pins {
42 mux {
43 pins = "gpio6", "gpio54", "gpio65";
44 function = "gpio";
45 drive-strength = <2>;
46 bias-pull-up;
47 };
48 };
49
50 i2c4_pins: i2c4_pinmux {
51 mux {
52 pins = "gpio12", "gpio13";
53 function = "gsbi4";
54 drive-strength = <12>;
55 bias-disable;
56 };
57 };
58
59 led_pins: led_pins {
60 mux {
61 pins = "gpio7", "gpio8", "gpio9", "gpio22", "gpio23",
62 "gpio24","gpio26", "gpio53", "gpio64";
63 function = "gpio";
64 drive-strength = <2>;
65 bias-pull-up;
66 };
67 };
68
69 mdio0_pins: mdio0_pins {
70 mux {
71 pins = "gpio0", "gpio1";
72 function = "gpio";
73 drive-strength = <8>;
74 bias-disable;
75 };
76 };
77
78 nand_pins: nand_pins {
79 mux {
80 pins = "gpio34", "gpio35", "gpio36",
81 "gpio37", "gpio38", "gpio39",
82 "gpio40", "gpio41", "gpio42",
83 "gpio43", "gpio44", "gpio45",
84 "gpio46", "gpio47";
85 function = "nand";
86 drive-strength = <10>;
87 bias-disable;
88 };
89 pullups {
90 pins = "gpio39";
91 bias-pull-up;
92 };
93 hold {
94 pins = "gpio40", "gpio41", "gpio42",
95 "gpio43", "gpio44", "gpio45",
96 "gpio46", "gpio47";
97 bias-bus-hold;
98 };
99 };
100
101 rgmii2_pins: rgmii2_pins {
102 mux {
103 pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
104 "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
105 function = "rgmii2";
106 drive-strength = <8>;
107 bias-disable;
108 };
109 };
110
111 usb0_pwr_en_pins: usb0_pwr_en_pins {
112 mux {
113 pins = "gpio15";
114 function = "gpio";
115 drive-strength = <12>;
116 bias-pull-down;
117 output-high;
118 };
119 };
120
121 usb1_pwr_en_pins: usb1_pwr_en_pins {
122 mux {
123 pins = "gpio16", "gpio68";
124 function = "gpio";
125 drive-strength = <12>;
126 bias-pull-down;
127 output-high;
128 };
129 };
130 };
131
132 gsbi@16300000 {
133 qcom,mode = <GSBI_PROT_I2C_UART>;
134 status = "ok";
135 serial@16340000 {
136 status = "ok";
137 };
138 /*
139 * The i2c device on gsbi4 should not be enabled.
140 * On ipq806x designs gsbi4 i2c is meant for exclusive
141 * RPM usage. Turning this on in kernel manifests as
142 * i2c failure for the RPM.
143 */
144 };
145
146 sata-phy@1b400000 {
147 status = "ok";
148 };
149
150 sata@29000000 {
151 status = "ok";
152 };
153
154 phy@100f8800 { /* USB3 port 1 HS phy */
155 status = "ok";
156 };
157
158 phy@100f8830 { /* USB3 port 1 SS phy */
159 status = "ok";
160 };
161
162 phy@110f8800 { /* USB3 port 0 HS phy */
163 status = "ok";
164 };
165
166 phy@110f8830 { /* USB3 port 0 SS phy */
167 status = "ok";
168 };
169
170 usb30@0 {
171 status = "ok";
172
173 pinctrl-0 = <&usb0_pwr_en_pins>;
174 pinctrl-names = "default";
175 };
176
177 usb30@1 {
178 status = "ok";
179
180 pinctrl-0 = <&usb1_pwr_en_pins>;
181 pinctrl-names = "default";
182 };
183
184 pcie0: pci@1b500000 {
185 status = "ok";
186 reset-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_HIGH>;
187 pinctrl-0 = <&pcie0_pins>;
188 pinctrl-names = "default";
189 };
190
191 pcie1: pci@1b700000 {
192 status = "ok";
193 reset-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_HIGH>;
194 pinctrl-0 = <&pcie1_pins>;
195 pinctrl-names = "default";
196 force_gen1 = <1>;
197 };
198
199 nand@1ac00000 {
200 status = "ok";
201
202 pinctrl-0 = <&nand_pins>;
203 pinctrl-names = "default";
204
205 #address-cells = <1>;
206 #size-cells = <1>;
207
208 cs0 {
209 reg = <0>;
210 compatible = "qcom,nandcs";
211
212 nand-ecc-strength = <4>;
213 nand-bus-width = <8>;
214 nand-ecc-step-size = <512>;
215
216 partitions {
217 compatible = "fixed-partitions";
218 #address-cells = <1>;
219 #size-cells = <1>;
220
221 qcadata@0 {
222 label = "qcadata";
223 reg = <0x0000000 0x0c80000>;
224 read-only;
225 };
226
227 APPSBL@c80000 {
228 label = "APPSBL";
229 reg = <0x0c80000 0x0500000>;
230 read-only;
231 };
232
233 APPSBLENV@1180000 {
234 label = "APPSBLENV";
235 reg = <0x1180000 0x0080000>;
236 read-only;
237 };
238
239 art: art@1200000 {
240 label = "art";
241 reg = <0x1200000 0x0140000>;
242 read-only;
243 };
244
245 artbak: art@1340000 {
246 label = "artbak";
247 reg = <0x1340000 0x0140000>;
248 read-only;
249 };
250
251 kernel@1480000 {
252 label = "kernel";
253 reg = <0x1480000 0x0400000>;
254 };
255
256 ubi@1880000 {
257 label = "ubi";
258 reg = <0x1880000 0x1C00000>;
259 };
260
261 netgear@3480000 {
262 label = "netgear";
263 reg = <0x3480000 0x4480000>;
264 read-only;
265 };
266
267 reserve@7900000 {
268 label = "reserve";
269 reg = <0x7900000 0x0700000>;
270 read-only;
271 };
272
273 firmware@1480000 {
274 label = "firmware";
275 reg = <0x1480000 0x2000000>;
276 };
277 };
278 };
279 };
280
281 mdio0: mdio {
282 compatible = "virtual,mdio-gpio";
283 #address-cells = <1>;
284 #size-cells = <0>;
285 gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
286 pinctrl-0 = <&mdio0_pins>;
287 pinctrl-names = "default";
288
289 phy0: ethernet-phy@0 {
290 device_type = "ethernet-phy";
291 reg = <0>;
292 qca,ar8327-initvals = <
293 0x00004 0x7600000 /* PAD0_MODE */
294 0x00008 0x1000000 /* PAD5_MODE */
295 0x0000c 0x80 /* PAD6_MODE */
296 0x000e4 0x6a545 /* MAC_POWER_SEL */
297 0x000e0 0xc74164de /* SGMII_CTRL */
298 0x0007c 0x4e /* PORT0_STATUS */
299 0x00094 0x4e /* PORT6_STATUS */
300 >;
301 };
302
303 phy4: ethernet-phy@4 {
304 device_type = "ethernet-phy";
305 reg = <4>;
306 };
307 };
308
309 gmac1: ethernet@37200000 {
310 status = "ok";
311 phy-mode = "rgmii";
312 phy-handle = <&phy4>;
313 qcom,id = <1>;
314
315 pinctrl-0 = <&rgmii2_pins>;
316 pinctrl-names = "default";
317
318 mtd-mac-address = <&art 6>;
319 };
320
321 gmac2: ethernet@37400000 {
322 status = "ok";
323 phy-mode = "sgmii";
324 qcom,id = <2>;
325
326 mtd-mac-address = <&art 0>;
327
328 fixed-link {
329 speed = <1000>;
330 full-duplex;
331 };
332 };
333 };
334
335 gpio-keys {
336 compatible = "gpio-keys";
337 pinctrl-0 = <&button_pins>;
338 pinctrl-names = "default";
339
340 wifi {
341 label = "wifi";
342 gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
343 linux,code = <KEY_RFKILL>;
344 };
345
346 reset {
347 label = "reset";
348 gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
349 linux,code = <KEY_RESTART>;
350 };
351
352 wps {
353 label = "wps";
354 gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
355 linux,code = <KEY_WPS_BUTTON>;
356 };
357 };
358
359 gpio-leds {
360 compatible = "gpio-leds";
361 pinctrl-0 = <&led_pins>;
362 pinctrl-names = "default";
363
364 usb1 {
365 label = "d7800:white:usb1";
366 gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
367 };
368
369 usb2 {
370 label = "d7800:white:usb2";
371 gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
372 };
373
374 power_amber: power_amber {
375 label = "d7800:amber:power";
376 gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
377 };
378
379 wan_white {
380 label = "d7800:white:wan";
381 gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
382 };
383
384 wan_amber {
385 label = "d7800:amber:wan";
386 gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
387 };
388
389 wps {
390 label = "d7800:white:wps";
391 gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
392 };
393
394 esata {
395 label = "d7800:white:esata";
396 gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
397 };
398
399 power_white: power_white {
400 label = "d7800:white:power";
401 gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
402 default-state = "keep";
403 };
404
405 wifi {
406 label = "d7800:white:wifi";
407 gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
408 };
409 };
410 };
411
412 &adm_dma {
413 status = "ok";
414 };