ipq806x: remove rpm pinctrl from board dts
[openwrt/openwrt.git] / target / linux / ipq806x / files-4.9 / arch / arm / boot / dts / qcom-ipq8064-r7500.dts
1 #include "qcom-ipq8064-v1.0.dtsi"
2
3 #include <dt-bindings/input/input.h>
4 #include <dt-bindings/soc/qcom,tcsr.h>
5
6 / {
7 model = "Netgear Nighthawk X4 R7500";
8 compatible = "netgear,r7500", "qcom,ipq8064";
9
10 memory@0 {
11 reg = <0x42000000 0xe000000>;
12 device_type = "memory";
13 };
14
15 reserved-memory {
16 #address-cells = <1>;
17 #size-cells = <1>;
18 ranges;
19 rsvd@41200000 {
20 reg = <0x41200000 0x300000>;
21 no-map;
22 };
23 };
24
25 aliases {
26 serial0 = &gsbi4_serial;
27 mdio-gpio0 = &mdio0;
28
29 led-boot = &power_white;
30 led-failsafe = &power_amber;
31 led-running = &power_white;
32 led-upgrade = &power_amber;
33 };
34
35 chosen {
36 bootargs = "rootfstype=squashfs noinitrd";
37 linux,stdout-path = "serial0:115200n8";
38 };
39
40 soc {
41 pinmux@800000 {
42 button_pins: button_pins {
43 mux {
44 pins = "gpio6", "gpio54", "gpio65";
45 function = "gpio";
46 drive-strength = <2>;
47 bias-pull-up;
48 };
49 };
50
51 i2c4_pins: i2c4_pinmux {
52 mux {
53 pins = "gpio12", "gpio13";
54 function = "gsbi4";
55 drive-strength = <12>;
56 bias-disable;
57 };
58 };
59
60 led_pins: led_pins {
61 mux {
62 pins = "gpio7", "gpio8", "gpio9", "gpio22", "gpio23",
63 "gpio24","gpio26", "gpio53", "gpio64";
64 function = "gpio";
65 drive-strength = <2>;
66 bias-pull-up;
67 };
68 };
69
70 mdio0_pins: mdio0_pins {
71 mux {
72 pins = "gpio0", "gpio1";
73 function = "gpio";
74 drive-strength = <8>;
75 bias-disable;
76 };
77 };
78
79 nand_pins: nand_pins {
80 mux {
81 pins = "gpio34", "gpio35", "gpio36",
82 "gpio37", "gpio38", "gpio39",
83 "gpio40", "gpio41", "gpio42",
84 "gpio43", "gpio44", "gpio45",
85 "gpio46", "gpio47";
86 function = "nand";
87 drive-strength = <10>;
88 bias-disable;
89 };
90 pullups {
91 pins = "gpio39";
92 bias-pull-up;
93 };
94 hold {
95 pins = "gpio40", "gpio41", "gpio42",
96 "gpio43", "gpio44", "gpio45",
97 "gpio46", "gpio47";
98 bias-bus-hold;
99 };
100 };
101
102 rgmii2_pins: rgmii2_pins {
103 mux {
104 pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
105 "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
106 function = "rgmii2";
107 drive-strength = <8>;
108 bias-disable;
109 };
110 };
111 };
112
113 gsbi@16300000 {
114 qcom,mode = <GSBI_PROT_I2C_UART>;
115 status = "ok";
116 serial@16340000 {
117 status = "ok";
118 };
119 /*
120 * The i2c device on gsbi4 should not be enabled.
121 * On ipq806x designs gsbi4 i2c is meant for exclusive
122 * RPM usage. Turning this on in kernel manifests as
123 * i2c failure for the RPM.
124 */
125 };
126
127 sata-phy@1b400000 {
128 status = "ok";
129 };
130
131 sata@29000000 {
132 status = "ok";
133 };
134
135 phy@100f8800 { /* USB3 port 1 HS phy */
136 clocks = <&gcc USB30_0_UTMI_CLK>;
137 status = "ok";
138 };
139
140 phy@100f8830 { /* USB3 port 1 SS phy */
141 clocks = <&gcc USB30_0_MASTER_CLK>;
142 status = "ok";
143 };
144
145 phy@110f8800 { /* USB3 port 0 HS phy */
146 clocks = <&gcc USB30_1_UTMI_CLK>;
147 status = "ok";
148 };
149
150 phy@110f8830 { /* USB3 port 0 SS phy */
151 clocks = <&gcc USB30_1_MASTER_CLK>;
152 status = "ok";
153 };
154
155 usb30@0 {
156 clocks = <&gcc USB30_1_MASTER_CLK>;
157 status = "ok";
158 };
159
160 usb30@1 {
161 clocks = <&gcc USB30_0_MASTER_CLK>;
162 status = "ok";
163 };
164
165 pcie0: pci@1b500000 {
166 status = "ok";
167 };
168
169 pcie1: pci@1b700000 {
170 status = "ok";
171 force_gen1 = <1>;
172 };
173
174 nand@1ac00000 {
175 status = "ok";
176
177 pinctrl-0 = <&nand_pins>;
178 pinctrl-names = "default";
179
180 cs0 {
181 reg = <0>;
182 compatible = "qcom,nandcs";
183
184 nand-ecc-strength = <4>;
185 nand-bus-width = <8>;
186 nand-ecc-step-size = <512>;
187
188 partitions {
189 compatible = "fixed-partitions";
190 #address-cells = <1>;
191 #size-cells = <1>;
192
193 qcadata@0 {
194 label = "qcadata";
195 reg = <0x0000000 0x0c80000>;
196 read-only;
197 };
198
199 APPSBL@c80000 {
200 label = "APPSBL";
201 reg = <0x0c80000 0x0500000>;
202 read-only;
203 };
204
205 APPSBLENV@1180000 {
206 label = "APPSBLENV";
207 reg = <0x1180000 0x0080000>;
208 read-only;
209 };
210
211 art: art@1200000 {
212 label = "art";
213 reg = <0x1200000 0x0140000>;
214 read-only;
215 };
216
217 kernel@1340000 {
218 label = "kernel";
219 reg = <0x1340000 0x0400000>;
220 };
221
222 ubi@1740000 {
223 label = "ubi";
224 reg = <0x1740000 0x1600000>;
225 };
226
227 netgear@2d40000 {
228 label = "netgear";
229 reg = <0x2d40000 0x0c00000>;
230 read-only;
231 };
232
233 reserve@3940000 {
234 label = "reserve";
235 reg = <0x3940000 0x46c0000>;
236 read-only;
237 };
238
239 firmware@1340000 {
240 label = "firmware";
241 reg = <0x1340000 0x1a00000>;
242 };
243 };
244 };
245 };
246
247 mdio0: mdio {
248 compatible = "virtual,mdio-gpio";
249 #address-cells = <1>;
250 #size-cells = <0>;
251 gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
252 pinctrl-0 = <&mdio0_pins>;
253 pinctrl-names = "default";
254
255 phy0: ethernet-phy@0 {
256 device_type = "ethernet-phy";
257 reg = <0>;
258 qca,ar8327-initvals = <
259 0x00004 0x7600000 /* PAD0_MODE */
260 0x00008 0x1000000 /* PAD5_MODE */
261 0x0000c 0x80 /* PAD6_MODE */
262 0x000e4 0x6a545 /* MAC_POWER_SEL */
263 0x000e0 0xc74164de /* SGMII_CTRL */
264 0x0007c 0x4e /* PORT0_STATUS */
265 0x00094 0x4e /* PORT6_STATUS */
266 >;
267 };
268
269 phy4: ethernet-phy@4 {
270 device_type = "ethernet-phy";
271 reg = <4>;
272 };
273 };
274
275 gmac1: ethernet@37200000 {
276 status = "ok";
277 phy-mode = "rgmii";
278 qcom,id = <1>;
279
280 pinctrl-0 = <&rgmii2_pins>;
281 pinctrl-names = "default";
282
283 mtd-mac-address = <&art 6>;
284
285 fixed-link {
286 speed = <1000>;
287 full-duplex;
288 };
289 };
290
291 gmac2: ethernet@37400000 {
292 status = "ok";
293 phy-mode = "sgmii";
294 qcom,id = <2>;
295
296 mtd-mac-address = <&art 0>;
297
298 fixed-link {
299 speed = <1000>;
300 full-duplex;
301 };
302 };
303 };
304
305 gpio-keys {
306 compatible = "gpio-keys";
307 pinctrl-0 = <&button_pins>;
308 pinctrl-names = "default";
309
310 wifi {
311 label = "wifi";
312 gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
313 linux,code = <KEY_RFKILL>;
314 };
315
316 reset {
317 label = "reset";
318 gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
319 linux,code = <KEY_RESTART>;
320 };
321
322 wps {
323 label = "wps";
324 gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
325 linux,code = <KEY_WPS_BUTTON>;
326 };
327 };
328
329 gpio-leds {
330 compatible = "gpio-leds";
331 pinctrl-0 = <&led_pins>;
332 pinctrl-names = "default";
333
334 usb1 {
335 label = "r7500:white:usb1";
336 gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
337 };
338
339 usb2 {
340 label = "r7500:white:usb2";
341 gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
342 };
343
344 power_amber: power_amber {
345 label = "r7500:amber:power";
346 gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
347 };
348
349 wan_white {
350 label = "r7500:white:wan";
351 gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
352 };
353
354 wan_amber {
355 label = "r7500:amber:wan";
356 gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
357 };
358
359 wps {
360 label = "r7500:white:wps";
361 gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
362 };
363
364 esata {
365 label = "r7500:white:esata";
366 gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
367 };
368
369 power_white: power_white {
370 label = "r7500:white:power";
371 gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
372 default-state = "keep";
373 };
374
375 wifi {
376 label = "r7500:white:wifi";
377 gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
378 };
379 };
380 };
381
382 &tcsr {
383 qcom,usb-ctrl-select = <TCSR_USB_SELECT_USB3_DUAL>;
384 compatible = "qcom,tcsr";
385 };
386
387 &adm_dma {
388 status = "ok";
389 };