target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-d7800.dts

   1 #include "qcom-ipq8064-v1.0.dtsi"
   2
   3 #include <dt-bindings/input/input.h>
   4
   5 / {
   6         model = "Netgear Nighthawk X4 D7800";
   7         compatible = "netgear,d7800", "qcom,ipq8064";
   8
   9         memory@0 {
  10                 reg = <0x42000000 0xe000000>;
  11                 device_type = "memory";
  12         };
  13
  14         reserved-memory {
  15                 #address-cells = <1>;
  16                 #size-cells = <1>;
  17                 ranges;
  18                 rsvd@41200000 {
  19                         reg = <0x41200000 0x300000>;
  20                         no-map;
  21                 };
  22         };
  23
  24         aliases {
  25                 serial0 = &uart4;
  26                 mdio-gpio0 = &mdio0;
  27
  28                 led-boot = &power_white;
  29                 led-failsafe = &power_amber;
  30                 led-running = &power_white;
  31                 led-upgrade = &power_amber;
  32         };
  33
  34         chosen {
  35                 bootargs = "rootfstype=squashfs noinitrd";
  36                 linux,stdout-path = "serial0:115200n8";
  37         };
  38
  39         soc {
  40                 pinmux@800000 {
  41                         button_pins: button_pins {
  42                                 mux {
  43                                         pins = "gpio6", "gpio54", "gpio65";
  44                                         function = "gpio";
  45                                         drive-strength = <2>;
  46                                         bias-pull-up;
  47                                 };
  48                         };
  49
  50                         i2c4_pins: i2c4_pinmux {
  51                                 mux {
  52                                         pins = "gpio12", "gpio13";
  53                                         function = "gsbi4";
  54                                         drive-strength = <12>;
  55                                         bias-disable;
  56                                 };
  57                         };
  58
  59                         led_pins: led_pins {
  60                                 mux {
  61                                         pins = "gpio7", "gpio8", "gpio9", "gpio22", "gpio23",
  62                                                 "gpio24","gpio26", "gpio53", "gpio64";
  63                                         function = "gpio";
  64                                         drive-strength = <2>;
  65                                         bias-pull-up;
  66                                 };
  67                         };
  68
  69                         mdio0_pins: mdio0_pins {
  70                                 mux {
  71                                         pins = "gpio0", "gpio1";
  72                                         function = "gpio";
  73                                         drive-strength = <8>;
  74                                         bias-disable;
  75                                 };
  76                         };
  77
  78                         nand_pins: nand_pins {
  79                                 mux {
  80                                         pins = "gpio34", "gpio35", "gpio36",
  81                                                "gpio37", "gpio38", "gpio39",
  82                                                "gpio40", "gpio41", "gpio42",
  83                                                "gpio43", "gpio44", "gpio45",
  84                                                "gpio46", "gpio47";
  85                                         function = "nand";
  86                                         drive-strength = <10>;
  87                                         bias-disable;
  88                                 };
  89                                 pullups {
  90                                         pins = "gpio39";
  91                                         bias-pull-up;
  92                                 };
  93                                 hold {
  94                                         pins = "gpio40", "gpio41", "gpio42",
  95                                                "gpio43", "gpio44", "gpio45",
  96                                                "gpio46", "gpio47";
  97                                         bias-bus-hold;
  98                                 };
  99                         };
 100
 101                         rgmii2_pins: rgmii2_pins {
 102                                 mux {
 103                                         pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
 104                                                "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
 105                                         function = "rgmii2";
 106                                         drive-strength = <8>;
 107                                         bias-disable;
 108                                 };
 109                         };
 110
 111                         usb0_pwr_en_pins: usb0_pwr_en_pins {
 112                                 mux {
 113                                         pins = "gpio15";
 114                                         function = "gpio";
 115                                         drive-strength = <12>;
 116                                         bias-pull-down;
 117                                         output-high;
 118                                 };
 119                         };
 120
 121                         usb1_pwr_en_pins: usb1_pwr_en_pins {
 122                                 mux {
 123                                         pins = "gpio16", "gpio68";
 124                                         function = "gpio";
 125                                         drive-strength = <12>;
 126                                         bias-pull-down;
 127                                         output-high;
 128                                 };
 129                         };
 130                 };
 131
 132                 gsbi@16300000 {
 133                         qcom,mode = <GSBI_PROT_I2C_UART>;
 134                         status = "ok";
 135                         serial@16340000 {
 136                                 status = "ok";
 137                         };
 138                         /*
 139                          * The i2c device on gsbi4 should not be enabled.
 140                          * On ipq806x designs gsbi4 i2c is meant for exclusive
 141                          * RPM usage. Turning this on in kernel manifests as
 142                          * i2c failure for the RPM.
 143                          */
 144                 };
 145
 146                 sata-phy@1b400000 {
 147                         status = "ok";
 148                 };
 149
 150                 sata@29000000 {
 151                         status = "ok";
 152                 };
 153
 154                 phy@100f8800 {          /* USB3 port 1 HS phy */
 155                         status = "ok";
 156                 };
 157
 158                 phy@100f8830 {          /* USB3 port 1 SS phy */
 159                         status = "ok";
 160                 };
 161
 162                 phy@110f8800 {          /* USB3 port 0 HS phy */
 163                         status = "ok";
 164                 };
 165
 166                 phy@110f8830 {          /* USB3 port 0 SS phy */
 167                         status = "ok";
 168                 };
 169
 170                 usb30@0 {
 171                         status = "ok";
 172
 173                         pinctrl-0 = <&usb0_pwr_en_pins>;
 174                         pinctrl-names = "default";
 175                 };
 176
 177                 usb30@1 {
 178                         status = "ok";
 179
 180                         pinctrl-0 = <&usb1_pwr_en_pins>;
 181                         pinctrl-names = "default";
 182                 };
 183
 184                 pcie0: pci@1b500000 {
 185                         status = "ok";
 186                         reset-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_HIGH>;
 187                         pinctrl-0 = <&pcie0_pins>;
 188                         pinctrl-names = "default";
 189                 };
 190
 191                 pcie1: pci@1b700000 {
 192                         status = "ok";
 193                         reset-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_HIGH>;
 194                         pinctrl-0 = <&pcie1_pins>;
 195                         pinctrl-names = "default";
 196                 };
 197
 198                 nand@1ac00000 {
 199                         status = "ok";
 200
 201                         pinctrl-0 = <&nand_pins>;
 202                         pinctrl-names = "default";
 203
 204                         nand-ecc-strength = <4>;
 205                         nand-bus-width = <8>;
 206
 207                         #address-cells = <1>;
 208                         #size-cells = <1>;
 209
 210                         qcadata@0 {
 211                                 label = "qcadata";
 212                                 reg = <0x0000000 0x0c80000>;
 213                                 read-only;
 214                         };
 215
 216                         APPSBL@c80000 {
 217                                 label = "APPSBL";
 218                                 reg = <0x0c80000 0x0500000>;
 219                                 read-only;
 220                         };
 221
 222                         APPSBLENV@1180000 {
 223                                 label = "APPSBLENV";
 224                                 reg = <0x1180000 0x0080000>;
 225                                 read-only;
 226                         };
 227
 228                         art: art@1200000 {
 229                                 label = "art";
 230                                 reg = <0x1200000 0x0140000>;
 231                                 read-only;
 232                         };
 233
 234                         artbak: art@1340000 {
 235                                 label = "artbak";
 236                                 reg = <0x1340000 0x0140000>;
 237                                 read-only;
 238                         };
 239
 240                         kernel@1480000 {
 241                                 label = "kernel";
 242                                 reg = <0x1480000 0x0200000>;
 243                         };
 244
 245                         ubi@1680000 {
 246                                 label = "ubi";
 247                                 reg = <0x1680000 0x1E00000>;
 248                         };
 249
 250                         netgear@3480000 {
 251                                 label = "netgear";
 252                                 reg = <0x3480000 0x4480000>;
 253                                 read-only;
 254                         };
 255
 256                         reserve@7900000 {
 257                                 label = "reserve";
 258                                 reg = <0x7900000 0x0700000>;
 259                                 read-only;
 260                         };
 261
 262                         firmware@1480000 {
 263                                 label = "firmware";
 264                                 reg = <0x1480000 0x2000000>;
 265                         };
 266                 };
 267
 268                 mdio0: mdio {
 269                         compatible = "virtual,mdio-gpio";
 270                         #address-cells = <1>;
 271                         #size-cells = <0>;
 272                         gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
 273                         pinctrl-0 = <&mdio0_pins>;
 274                         pinctrl-names = "default";
 275
 276                         phy0: ethernet-phy@0 {
 277                                 device_type = "ethernet-phy";
 278                                 reg = <0>;
 279                                 qca,ar8327-initvals = <
 280                                         0x00004 0x7600000   /* PAD0_MODE */
 281                                         0x00008 0x1000000   /* PAD5_MODE */
 282                                         0x0000c 0x80        /* PAD6_MODE */
 283                                         0x000e4 0x6a545     /* MAC_POWER_SEL */
 284                                         0x000e0 0xc74164de  /* SGMII_CTRL */
 285                                         0x0007c 0x4e        /* PORT0_STATUS */
 286                                         0x00094 0x4e        /* PORT6_STATUS */
 287                                         >;
 288                         };
 289
 290                         phy4: ethernet-phy@4 {
 291                                 device_type = "ethernet-phy";
 292                                 reg = <4>;
 293                         };
 294                 };
 295
 296                 gmac1: ethernet@37200000 {
 297                         status = "ok";
 298                         phy-mode = "rgmii";
 299                         phy-handle = <&phy4>;
 300                         qcom,id = <1>;
 301
 302                         pinctrl-0 = <&rgmii2_pins>;
 303                         pinctrl-names = "default";
 304
 305                         mtd-mac-address = <&art 6>;
 306                 };
 307
 308                 gmac2: ethernet@37400000 {
 309                         status = "ok";
 310                         phy-mode = "sgmii";
 311                         qcom,id = <2>;
 312
 313                         mtd-mac-address = <&art 0>;
 314
 315                         fixed-link {
 316                                 speed = <1000>;
 317                                 full-duplex;
 318                         };
 319                 };
 320
 321                 rpm@108000 {
 322                         pinctrl-0 = <&i2c4_pins>;
 323                         pinctrl-names = "default";
 324                 };
 325         };
 326
 327         gpio-keys {
 328                 compatible = "gpio-keys";
 329                 pinctrl-0 = <&button_pins>;
 330                 pinctrl-names = "default";
 331
 332                 wifi {
 333                         label = "wifi";
 334                         gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
 335                         linux,code = <KEY_RFKILL>;
 336                 };
 337
 338                 reset {
 339                         label = "reset";
 340                         gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
 341                         linux,code = <KEY_RESTART>;
 342                 };
 343
 344                 wps {
 345                         label = "wps";
 346                         gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
 347                         linux,code = <KEY_WPS_BUTTON>;
 348                 };
 349         };
 350
 351         gpio-leds {
 352                 compatible = "gpio-leds";
 353                 pinctrl-0 = <&led_pins>;
 354                 pinctrl-names = "default";
 355
 356                 usb1 {
 357                         label = "d7800:white:usb1";
 358                         gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
 359                 };
 360
 361                 usb2 {
 362                         label = "d7800:white:usb2";
 363                         gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
 364                 };
 365
 366                 power_amber: power_amber {
 367                         label = "d7800:amber:power";
 368                         gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
 369                 };
 370
 371                 wan_white {
 372                         label = "d7800:white:wan";
 373                         gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
 374                 };
 375
 376                 wan_amber {
 377                         label = "d7800:amber:wan";
 378                         gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
 379                 };
 380
 381                 wps {
 382                         label = "d7800:white:wps";
 383                         gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
 384                 };
 385
 386                 esata {
 387                         label = "d7800:white:esata";
 388                         gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
 389                 };
 390
 391                 power_white: power_white {
 392                         label = "d7800:white:power";
 393                         gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
 394                         default-state = "keep";
 395                 };
 396
 397                 wifi {
 398                         label = "d7800:white:wifi";
 399                         gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
 400                 };
 401         };
 402 };
 403
 404 &adm_dma {
 405         status = "ok";
 406 };