target/linux/ipq806x/patches-3.18/801-ARM-qcom-add-Netgear-Nighthawk-X4-D7800-device-tree.patch

   1 --- a/arch/arm/boot/dts/Makefile        2015-09-22 18:30:09.033530282 +0530
   2 +++ b/arch/arm/boot/dts/Makefile        2015-09-23 17:06:44.892947581 +0530
   3 @@ -362,6 +362,7 @@
   4         qcom-ipq8064-ap148.dtb \
   5         qcom-ipq8064-db149.dtb \
   6         qcom-ipq8064-r7500.dtb \
   7 +       qcom-ipq8064-d7800.dtb \
   8         qcom-msm8660-surf.dtb \
   9         qcom-msm8960-cdp.dtb \
  10         qcom-msm8974-sony-xperia-honami.dtb
  11 --- a/arch/arm/boot/dts/qcom-ipq8064-d7800.dts  1970-01-01 05:30:00.000000000 +0530
  12 +++ b/arch/arm/boot/dts/qcom-ipq8064-d7800.dts  2015-09-23 17:06:45.336947567 +0530
  13 @@ -0,0 +1,368 @@
  14 +#include "qcom-ipq8064-v1.0.dtsi"
  15 +
  16 +#include <dt-bindings/input/input.h>
  17 +
  18 +/ {
  19 +       model = "Netgear Nighthawk X4 D7800";
  20 +       compatible = "netgear,d7800", "qcom,ipq8064";
  21 +
  22 +       memory@0 {
  23 +               reg = <0x42000000 0xe000000>;
  24 +               device_type = "memory";
  25 +       };
  26 +
  27 +       reserved-memory {
  28 +               #address-cells = <1>;
  29 +               #size-cells = <1>;
  30 +               ranges;
  31 +               rsvd@41200000 {
  32 +                       reg = <0x41200000 0x300000>;
  33 +                       no-map;
  34 +               };
  35 +       };
  36 +
  37 +       aliases {
  38 +               serial0 = &uart4;
  39 +               mdio-gpio0 = &mdio0;
  40 +       };
  41 +
  42 +       chosen {
  43 +               bootargs = "rootfstype=squashfs noinitrd";
  44 +               linux,stdout-path = "serial0:115200n8";
  45 +       };
  46 +
  47 +       soc {
  48 +               pinmux@800000 {
  49 +                       i2c4_pins: i2c4_pinmux {
  50 +                               pins = "gpio12", "gpio13";
  51 +                               function = "gsbi4";
  52 +                               bias-disable;
  53 +                       };
  54 +
  55 +                       pcie0_pins: pcie0_pinmux {
  56 +                               mux {
  57 +                                       pins = "gpio3";
  58 +                                       function = "pcie1_rst";
  59 +                                       drive-strength = <12>;
  60 +                                       bias-disable;
  61 +                               };
  62 +                       };
  63 +
  64 +                       pcie1_pins: pcie1_pinmux {
  65 +                               mux {
  66 +                                       pins = "gpio48";
  67 +                                       function = "pcie2_rst";
  68 +                                       drive-strength = <12>;
  69 +                                       bias-disable;
  70 +                               };
  71 +                       };
  72 +
  73 +                       nand_pins: nand_pins {
  74 +                               mux {
  75 +                                       pins = "gpio34", "gpio35", "gpio36",
  76 +                                              "gpio37", "gpio38", "gpio39",
  77 +                                              "gpio40", "gpio41", "gpio42",
  78 +                                              "gpio43", "gpio44", "gpio45",
  79 +                                              "gpio46", "gpio47";
  80 +                                       function = "nand";
  81 +                                       drive-strength = <10>;
  82 +                                       bias-disable;
  83 +                               };
  84 +                               pullups {
  85 +                                       pins = "gpio39";
  86 +                                       bias-pull-up;
  87 +                               };
  88 +                               hold {
  89 +                                       pins = "gpio40", "gpio41", "gpio42",
  90 +                                              "gpio43", "gpio44", "gpio45",
  91 +                                              "gpio46", "gpio47";
  92 +                                       bias-bus-hold;
  93 +                               };
  94 +                       };
  95 +
  96 +                       mdio0_pins: mdio0_pins {
  97 +                               mux {
  98 +                                       pins = "gpio0", "gpio1";
  99 +                                       function = "gpio";
 100 +                                       drive-strength = <8>;
 101 +                                       bias-disable;
 102 +                               };
 103 +                       };
 104 +
 105 +                       rgmii2_pins: rgmii2_pins {
 106 +                               mux {
 107 +                                       pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
 108 +                                              "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
 109 +                                       function = "rgmii2";
 110 +                                       drive-strength = <8>;
 111 +                                       bias-disable;
 112 +                               };
 113 +                       };
 114 +               };
 115 +
 116 +               gsbi@16300000 {
 117 +                       qcom,mode = <GSBI_PROT_I2C_UART>;
 118 +                       status = "ok";
 119 +                       serial@16340000 {
 120 +                               status = "ok";
 121 +                       };
 122 +                       /*
 123 +                        * The i2c device on gsbi4 should not be enabled.
 124 +                        * On ipq806x designs gsbi4 i2c is meant for exclusive
 125 +                        * RPM usage. Turning this on in kernel manifests as
 126 +                        * i2c failure for the RPM.
 127 +                        */
 128 +               };
 129 +
 130 +               sata-phy@1b400000 {
 131 +                       status = "ok";
 132 +               };
 133 +
 134 +               sata@29000000 {
 135 +                       status = "ok";
 136 +               };
 137 +
 138 +               phy@100f8800 {          /* USB3 port 1 HS phy */
 139 +                       status = "ok";
 140 +               };
 141 +
 142 +               phy@100f8830 {          /* USB3 port 1 SS phy */
 143 +                       status = "ok";
 144 +               };
 145 +
 146 +               phy@110f8800 {          /* USB3 port 0 HS phy */
 147 +                       status = "ok";
 148 +               };
 149 +
 150 +               phy@110f8830 {          /* USB3 port 0 SS phy */
 151 +                       status = "ok";
 152 +               };
 153 +
 154 +               usb30@0 {
 155 +                       status = "ok";
 156 +               };
 157 +
 158 +               usb30@1 {
 159 +                       status = "ok";
 160 +               };
 161 +
 162 +               pcie0: pci@1b500000 {
 163 +                       status = "ok";
 164 +                       reset-gpio = <&qcom_pinmux 3 0>;
 165 +                       pinctrl-0 = <&pcie0_pins>;
 166 +                       pinctrl-names = "default";
 167 +               };
 168 +
 169 +               pcie1: pci@1b700000 {
 170 +                       status = "ok";
 171 +                       reset-gpio = <&qcom_pinmux 48 0>;
 172 +                       pinctrl-0 = <&pcie1_pins>;
 173 +                       pinctrl-names = "default";
 174 +               };
 175 +
 176 +               nand@1ac00000 {
 177 +                       status = "ok";
 178 +
 179 +                       pinctrl-0 = <&nand_pins>;
 180 +                       pinctrl-names = "default";
 181 +
 182 +                       nand-ecc-strength = <4>;
 183 +                       nand-bus-width = <8>;
 184 +
 185 +                       #address-cells = <1>;
 186 +                       #size-cells = <1>;
 187 +
 188 +                       qcadata@0 {
 189 +                               label = "qcadata";
 190 +                               reg = <0x0000000 0x0c80000>;
 191 +                               read-only;
 192 +                       };
 193 +
 194 +                       APPSBL@c80000 {
 195 +                               label = "APPSBL";
 196 +                               reg = <0x0c80000 0x0500000>;
 197 +                               read-only;
 198 +                       };
 199 +
 200 +                       APPSBLENV@1180000 {
 201 +                               label = "APPSBLENV";
 202 +                               reg = <0x1180000 0x0080000>;
 203 +                               read-only;
 204 +                       };
 205 +
 206 +                       art: art@1200000 {
 207 +                               label = "art";
 208 +                               reg = <0x1200000 0x0140000>;
 209 +                               read-only;
 210 +                       };
 211 +
 212 +                       artbak: art@1340000 {
 213 +                               label = "artbak";
 214 +                               reg = <0x1340000 0x0140000>;
 215 +                               read-only;
 216 +                       };
 217 +
 218 +                       kernel@1480000 {
 219 +                               label = "kernel";
 220 +                               reg = <0x1480000 0x0200000>;
 221 +                       };
 222 +
 223 +                       ubi@1680000 {
 224 +                               label = "ubi";
 225 +                               reg = <0x1680000 0x1E00000>;
 226 +                       };
 227 +
 228 +                       netgear@3480000 {
 229 +                               label = "netgear";
 230 +                               reg = <0x3480000 0x4480000>;
 231 +                               read-only;
 232 +                       };
 233 +
 234 +                       reserve@7900000 {
 235 +                               label = "reserve";
 236 +                               reg = <0x7900000 0x0700000>;
 237 +                               read-only;
 238 +                       };
 239 +
 240 +                       firmware@1480000 {
 241 +                               label = "firmware";
 242 +                               reg = <0x1480000 0x2000000>;
 243 +                       };
 244 +
 245 +               };
 246 +
 247 +               mdio0: mdio {
 248 +                       compatible = "virtual,mdio-gpio";
 249 +                       #address-cells = <1>;
 250 +                       #size-cells = <0>;
 251 +                       gpios = <&qcom_pinmux 1 0 &qcom_pinmux 0 0>;
 252 +                       pinctrl-0 = <&mdio0_pins>;
 253 +                       pinctrl-names = "default";
 254 +
 255 +                       phy0: ethernet-phy@0 {
 256 +                               device_type = "ethernet-phy";
 257 +                               reg = <0>;
 258 +                               qca,ar8327-initvals = <
 259 +                                       0x00004 0x7600000   /* PAD0_MODE */
 260 +                                       0x00008 0x1000000   /* PAD5_MODE */
 261 +                                       0x0000c 0x80        /* PAD6_MODE */
 262 +                                       0x000e4 0xaa545     /* MAC_POWER_SEL */
 263 +                                       0x000e0 0xc74164de  /* SGMII_CTRL */
 264 +                                       0x0007c 0x4e        /* PORT0_STATUS */
 265 +                                       0x00094 0x4e        /* PORT6_STATUS */
 266 +                                       >;
 267 +                       };
 268 +
 269 +                       phy4: ethernet-phy@4 {
 270 +                               device_type = "ethernet-phy";
 271 +                               reg = <4>;
 272 +                       };
 273 +               };
 274 +
 275 +               gmac1: ethernet@37200000 {
 276 +                       status = "ok";
 277 +                       phy-mode = "rgmii";
 278 +                       phy-handle = <&phy4>;
 279 +                       qcom,id = <1>;
 280 +
 281 +                       pinctrl-0 = <&rgmii2_pins>;
 282 +                       pinctrl-names = "default";
 283 +
 284 +                       mtd-mac-address = <&art 6>;
 285 +               };
 286 +
 287 +               gmac2: ethernet@37400000 {
 288 +                       status = "ok";
 289 +                       phy-mode = "sgmii";
 290 +                       qcom,id = <2>;
 291 +
 292 +                       mtd-mac-address = <&art 0>;
 293 +
 294 +                       fixed-link {
 295 +                               speed = <1000>;
 296 +                               full-duplex;
 297 +                       };
 298 +               };
 299 +       };
 300 +
 301 +       gpio-keys {
 302 +               compatible = "gpio-keys";
 303 +
 304 +               wifi {
 305 +                       label = "wifi";
 306 +                       gpios = <&qcom_pinmux 6 1>;
 307 +                       linux,code = <KEY_WLAN>;
 308 +               };
 309 +
 310 +               reset {
 311 +                       label = "reset";
 312 +                       gpios = <&qcom_pinmux 54 1>;
 313 +                       linux,code = <KEY_RESTART>;
 314 +               };
 315 +
 316 +               wps {
 317 +                       label = "wps";
 318 +                       gpios = <&qcom_pinmux 65 1>;
 319 +                       linux,code = <KEY_WPS_BUTTON>;
 320 +               };
 321 +       };
 322 +
 323 +       gpio-leds {
 324 +               compatible = "gpio-leds";
 325 +
 326 +               usb1 {
 327 +                       label = "d7800:amber:usb1";
 328 +                       gpios = <&qcom_pinmux 7 0>;
 329 +               };
 330 +
 331 +               usb3 {
 332 +                       label = "d7800:amber:usb3";
 333 +                       gpios = <&qcom_pinmux 8 0>;
 334 +               };
 335 +
 336 +               status {
 337 +                       label = "d7800:amber:status";
 338 +                       gpios = <&qcom_pinmux 9 0>;
 339 +               };
 340 +
 341 +               internet {
 342 +                       label = "d7800:white:internet";
 343 +                       gpios = <&qcom_pinmux 22 0>;
 344 +               };
 345 +
 346 +               wan {
 347 +                       label = "d7800:white:wan";
 348 +                       gpios = <&qcom_pinmux 23 0>;
 349 +               };
 350 +
 351 +               wps {
 352 +                       label = "d7800:white:wps";
 353 +                       gpios = <&qcom_pinmux 24 0>;
 354 +               };
 355 +
 356 +               esata {
 357 +                       label = "d7800:white:esata";
 358 +                       gpios = <&qcom_pinmux 26 0>;
 359 +               };
 360 +
 361 +               power {
 362 +                       label = "d7800:white:power";
 363 +                       gpios = <&qcom_pinmux 53 0>;
 364 +                       default-state = "on";
 365 +               };
 366 +
 367 +               rfkill {
 368 +                       label = "d7800:white:rfkill";
 369 +                       gpios = <&qcom_pinmux 64 0>;
 370 +               };
 371 +
 372 +               wifi5g {
 373 +                       label = "d7800:white:wifi5g";
 374 +                       gpios = <&qcom_pinmux 67 0>;
 375 +               };
 376 +       };
 377 +};
 378 +
 379 +&adm_dma {
 380 +       status = "ok";
 381 +};