target/linux/kirkwood/base-files/lib/upgrade/linksys.sh

   1 #
   2 # Copyright (C) 2014 OpenWrt.org
   3 #
   4
   5 linksys_get_target_firmware() {
   6
   7         local cur_boot_part mtd_ubi0
   8
   9         cur_boot_part=$(/usr/sbin/fw_printenv -n boot_part)
  10         if [ -z "${cur_boot_part}" ] ; then
  11                 mtd_ubi0=$(cat /sys/devices/virtual/ubi/ubi0/mtd_num)
  12                 case $(egrep ^mtd${mtd_ubi0}: /proc/mtd | cut -d '"' -f 2) in
  13                 kernel|rootfs)
  14                         cur_boot_part=1
  15                         ;;
  16                 alt_kernel|alt_rootfs)
  17                         cur_boot_part=2
  18                         ;;
  19                 esac
  20                 >&2 printf "Current boot_part='%s' selected from ubi0/mtd_num='%s'" \
  21                         "${cur_boot_part}" "${mtd_ubi0}"
  22         fi
  23
  24         case $cur_boot_part in
  25         1)
  26                 fw_setenv -s - <<-EOF
  27                         boot_part 2
  28                         bootcmd "run altnandboot"
  29                 EOF
  30                 printf "kernel2"
  31                 return
  32                 ;;
  33         2)
  34                 fw_setenv -s - <<-EOF
  35                         boot_part 1
  36                         bootcmd "run nandboot"
  37                 EOF
  38                 printf "kernel1"
  39                 return
  40                 ;;
  41         *)
  42                 return
  43                 ;;
  44         esac
  45 }
  46
  47 linksys_get_root_magic() {
  48         (get_image "$@" | dd skip=786432 bs=4 count=1 | hexdump -v -n 4 -e '1/1 "%02x"') 2>/dev/null
  49 }
  50
  51 platform_do_upgrade_linksys() {
  52         local magic_long="$(get_magic_long "$1")"
  53
  54         mkdir -p /var/lock
  55         local part_label="$(linksys_get_target_firmware)"
  56         touch /var/lock/fw_printenv.lock
  57
  58         if [ ! -n "$part_label" ]
  59         then
  60                 echo "cannot find target partition"
  61                 exit 1
  62         fi
  63
  64         local target_mtd=$(find_mtd_part $part_label)
  65
  66         [ "$magic_long" = "73797375" ] && {
  67                 CI_KERNPART="$part_label"
  68                 if [ "$part_label" = "kernel1" ]
  69                 then
  70                         CI_UBIPART="rootfs1"
  71                 else
  72                         CI_UBIPART="rootfs2"
  73                 fi
  74
  75                 nand_upgrade_tar "$1"
  76         }
  77         [ "$magic_long" = "27051956" ] && {
  78                 # check firmwares' rootfs types
  79                 local target_mtd=$(find_mtd_part $part_label)
  80                 local oldroot="$(linksys_get_root_magic $target_mtd)"
  81                 local newroot="$(linksys_get_root_magic "$1")"
  82
  83                 if [ "$newroot" = "55424923" -a "$oldroot" = "55424923" ]
  84                 # we're upgrading from a firmware with UBI to one with UBI
  85                 then
  86                         # erase everything to be safe
  87                         mtd erase $part_label
  88                         get_image "$1" | mtd -n write - $part_label
  89                 else
  90                         get_image "$1" | mtd write - $part_label
  91                 fi
  92         }
  93 }