target/linux/kirkwood/patches-3.10/0023-net-mv643xx_eth-use-of_phy_connect-if-phy_node-prese.patch

   1 From db22a1196162f981444d241f92d02e2e50d12ed7 Mon Sep 17 00:00:00 2001
   2 From: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
   3 Date: Wed, 29 May 2013 09:32:46 +0000
   4 Subject: [PATCH 23/29] net: mv643xx_eth: use of_phy_connect if phy_node
   5  present
   6
   7 This connects to a phy node passed to the port device instead of probing
   8 the phy by phy_addr.
   9
  10 Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
  11 Signed-off-by: David S. Miller <davem@davemloft.net>
  12 ---
  13  drivers/net/ethernet/marvell/mv643xx_eth.c | 25 ++++++++++++++++++-------
  14  1 file changed, 18 insertions(+), 7 deletions(-)
  15
  16 --- a/drivers/net/ethernet/marvell/mv643xx_eth.c
  17 +++ b/drivers/net/ethernet/marvell/mv643xx_eth.c
  18 @@ -60,6 +60,7 @@
  19  #include <linux/types.h>
  20  #include <linux/slab.h>
  21  #include <linux/clk.h>
  22 +#include <linux/of_mdio.h>
  23
  24  static char mv643xx_eth_driver_name[] = "mv643xx_eth";
  25  static char mv643xx_eth_driver_version[] = "1.4";
  26 @@ -2714,17 +2715,27 @@ static int mv643xx_eth_probe(struct plat
  27         netif_set_real_num_tx_queues(dev, mp->txq_count);
  28         netif_set_real_num_rx_queues(dev, mp->rxq_count);
  29
  30 -       if (pd->phy_addr != MV643XX_ETH_PHY_NONE) {
  31 +       err = 0;
  32 +       if (pd->phy_node) {
  33 +               mp->phy = of_phy_connect(mp->dev, pd->phy_node,
  34 +                                        mv643xx_eth_adjust_link, 0,
  35 +                                        PHY_INTERFACE_MODE_GMII);
  36 +               if (!mp->phy)
  37 +                       err = -ENODEV;
  38 +       } else if (pd->phy_addr != MV643XX_ETH_PHY_NONE) {
  39                 mp->phy = phy_scan(mp, pd->phy_addr);
  40
  41 -               if (IS_ERR(mp->phy)) {
  42 +               if (IS_ERR(mp->phy))
  43                         err = PTR_ERR(mp->phy);
  44 -                       if (err == -ENODEV)
  45 -                               err = -EPROBE_DEFER;
  46 -                       goto out;
  47 -               }
  48 -               phy_init(mp, pd->speed, pd->duplex);
  49 +               else
  50 +                       phy_init(mp, pd->speed, pd->duplex);
  51         }
  52 +       if (err == -ENODEV) {
  53 +               err = -EPROBE_DEFER;
  54 +               goto out;
  55 +       }
  56 +       if (err)
  57 +               goto out;
  58
  59         SET_ETHTOOL_OPS(dev, &mv643xx_eth_ethtool_ops);
  60