target/linux/kirkwood/patches-3.18/170-ea3500.patch

   1 --- a/arch/arm/boot/dts/Makefile
   2 +++ b/arch/arm/boot/dts/Makefile
   3 @@ -128,6 +128,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += kirkwood-
   4         kirkwood-is2.dtb \
   5         kirkwood-km_kirkwood.dtb \
   6         kirkwood-laplug.dtb \
   7 +       kirkwood-linksys-audi.dtb \
   8         kirkwood-linksys-viper.dtb \
   9         kirkwood-lschlv2.dtb \
  10         kirkwood-lsxhl.dtb \
  11 --- /dev/null
  12 +++ b/arch/arm/boot/dts/kirkwood-linksys-audi.dts
  13 @@ -0,0 +1,179 @@
  14 +/*
  15 + * kirkwood-linksys-audi.dts - Device Tree file for Linksys EA3500
  16 + *
  17 + * (c) 2013 Jonas Gorski <jogo@openwrt.org>
  18 + * (c) 2013 Deutsche Telekom Innovation Laboratories
  19 + * (c) 2014 Luka Perkov <luka@openwrt.org>
  20 + * (c) 2014 Dan Walters <dan@walters.io>
  21 + *
  22 + * This file is licensed under the terms of the GNU General Public
  23 + * License version 2.  This program is licensed "as is" without any
  24 + * warranty of any kind, whether express or implied.
  25 + */
  26 +
  27 +/dts-v1/;
  28 +
  29 +#include "kirkwood.dtsi"
  30 +#include "kirkwood-6282.dtsi"
  31 +
  32 +/ {
  33 +       model = "Linksys EA3500";
  34 +       compatible = "linksys,audi", "marvell,kirkwood-88f6282", "marvell,kirkwood";
  35 +
  36 +       memory {
  37 +               device_type = "memory";
  38 +               reg = <0x00000000 0x4000000>;
  39 +       };
  40 +
  41 +       chosen {
  42 +               bootargs = "console=ttyS0,115200n8 earlyprintk";
  43 +       };
  44 +
  45 +       mbus {
  46 +               pcie-controller {
  47 +                       status = "okay";
  48 +
  49 +                       pcie@1,0 {
  50 +                               status = "okay";
  51 +                       };
  52 +
  53 +                       pcie@2,0 {
  54 +                               status = "okay";
  55 +                       };
  56 +               };
  57 +       };
  58 +
  59 +       ocp@f1000000 {
  60 +               pinctrl: pin-controller@10000 {
  61 +                       pmx_led_green_power: pmx-led-green-power {
  62 +                               marvell,pins = "mpp7";
  63 +                               marvell,function = "gpo";
  64 +                       };
  65 +                       pmx_btn_wps: pmx-btn-wps {
  66 +                               marvell,pins = "mpp47";
  67 +                               marvell,function = "gpio";
  68 +                       };
  69 +                       pmx_btn_reset: pmx-btn-reset {
  70 +                               marvell,pins = "mpp48";
  71 +                               marvell,function = "gpio";
  72 +                       };
  73 +               };
  74 +
  75 +               rtc@10300 {
  76 +                       status = "disabled";
  77 +               };
  78 +
  79 +               serial@12000 {
  80 +                       status = "okay";
  81 +               };
  82 +
  83 +       };
  84 +
  85 +       gpio_keys {
  86 +               compatible = "gpio-keys";
  87 +               #address-cells = <1>;
  88 +               #size-cells = <0>;
  89 +               pinctrl-0 = < &pmx_btn_wps &pmx_btn_reset >;
  90 +               pinctrl-names = "default";
  91 +
  92 +               button@15 {
  93 +                       label = "WPS Button";
  94 +                       linux,code = <KEY_WPS_BUTTON>;
  95 +                       gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
  96 +               };
  97 +
  98 +               button@16 {
  99 +                       label = "Reset Button";
 100 +                       linux,code = <KEY_RESTART>;
 101 +                       gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
 102 +               };
 103 +       };
 104 +
 105 +       gpio-leds {
 106 +               compatible = "gpio-leds";
 107 +               pinctrl-0 = < &pmx_led_green_power >;
 108 +               pinctrl-names = "default";
 109 +
 110 +               green-power {
 111 +                       label = "audi:green:power";
 112 +                       gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
 113 +               };
 114 +       };
 115 +
 116 +       mvsw61xx {
 117 +               compatible = "marvell,88e6171";
 118 +               status = "okay";
 119 +               reg = <0x10>;
 120 +
 121 +               mii-bus = <&mdio>;
 122 +               cpu-port-0 = <5>;
 123 +               cpu-port-1 = <6>;
 124 +               is-indirect;
 125 +       };
 126 +};
 127 +
 128 +&nand {
 129 +       status = "okay";
 130 +       pinctrl-0 = <&pmx_nand>;
 131 +       pinctrl-names = "default";
 132 +
 133 +       partition@0 {
 134 +               label = "u-boot";
 135 +               reg = <0x0 0x80000>;
 136 +       };
 137 +
 138 +       partition@80000 {
 139 +               label = "u_env";
 140 +               reg = <0x80000 0x4000>;
 141 +       };
 142 +
 143 +       partition@84000 {
 144 +               label = "s_env";
 145 +               reg = <0x84000 0x4000>;
 146 +       };
 147 +
 148 +       partition@200000 {
 149 +               label = "kernel1";
 150 +               reg = <0x200000 0x1400000>;
 151 +       };
 152 +
 153 +       partition@490000 {
 154 +               label = "rootfs1";
 155 +               reg = <0x490000 0x1170000>;
 156 +       };
 157 +
 158 +       partition@1600000 {
 159 +               label = "kernel2";
 160 +               reg = <0x1600000 0x1400000>;
 161 +       };
 162 +
 163 +       partition@1890000 {
 164 +               label = "rootfs2";
 165 +               reg = <0x1890000 0x1170000>;
 166 +       };
 167 +
 168 +       partition@2a00000 {
 169 +               label = "syscfg";
 170 +               reg = <0x2a00000  0x1600000>;
 171 +       };
 172 +};
 173 +
 174 +&mdio {
 175 +       status = "okay";
 176 +};
 177 +
 178 +&eth0 {
 179 +       status = "okay";
 180 +       ethernet0-port@0 {
 181 +               speed = <1000>;
 182 +               duplex = <1>;
 183 +       };
 184 +};
 185 +
 186 +&eth1 {
 187 +       status = "okay";
 188 +       ethernet1-port@0 {
 189 +               speed = <1000>;
 190 +               duplex = <1>;
 191 +       };
 192 +};