target/linux/kirkwood/patches-5.10/110-pogo_e02.patch

   1 --- a/arch/arm/boot/dts/kirkwood-pogo_e02.dts
   2 +++ b/arch/arm/boot/dts/kirkwood-pogo_e02.dts
   3 @@ -20,6 +20,13 @@
   4         compatible = "cloudengines,pogoe02", "marvell,kirkwood-88f6281",
   5                      "marvell,kirkwood";
   6
   7 +       aliases {
   8 +               led-boot = &led_health;
   9 +               led-failsafe = &led_fault;
  10 +               led-running = &led_health;
  11 +               led-upgrade = &led_fault;
  12 +       };
  13 +
  14         memory {
  15                 device_type = "memory";
  16                 reg = <0x00000000 0x10000000>;
  17 @@ -33,12 +40,12 @@
  18         gpio-leds {
  19                 compatible = "gpio-leds";
  20
  21 -               health {
  22 +               led_health: health {
  23                         label = "pogo_e02:green:health";
  24                         gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
  25 -                       default-state = "keep";
  26 +                       default-state = "on";
  27                 };
  28 -               fault {
  29 +               led_fault: fault {
  30                         label = "pogo_e02:orange:fault";
  31                         gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
  32                 };
  33 @@ -95,24 +102,24 @@
  34         status = "okay";
  35
  36         partition@0 {
  37 -               label = "u-boot";
  38 -               reg = <0x0000000 0x100000>;
  39 +               label = "uboot";
  40 +               reg = <0x0 0xe0000>;
  41                 read-only;
  42         };
  43
  44 -       partition@100000 {
  45 -               label = "uImage";
  46 -               reg = <0x0100000 0x400000>;
  47 +       partition@e0000 {
  48 +               label = "uboot_env";
  49 +               reg = <0xe0000 0x20000>;
  50         };
  51
  52 -       partition@500000 {
  53 -               label = "pogoplug";
  54 -               reg = <0x0500000 0x2000000>;
  55 +       partition@100000 {
  56 +               label = "second_stage_uboot";
  57 +               reg = <0x100000 0x100000>;
  58         };
  59
  60 -       partition@2500000 {
  61 -               label = "root";
  62 -               reg = <0x02500000 0x5b00000>;
  63 +       partition@200000 {
  64 +               label = "ubi";
  65 +               reg = <0x200000 0x7e00000>;
  66         };
  67  };
  68