target/linux/lantiq/base-files/etc/board.d/02_network

   1 #!/bin/sh
   2 #
   3 # Copyright (C) 2011-2015 OpenWrt.org
   4 #
   5
   6 . /lib/functions/uci-defaults.sh
   7 . /lib/functions/system.sh
   8 . /lib/functions/lantiq.sh
   9
  10 board_config_update
  11
  12 vpi=1
  13 vci=32
  14 annex="a"
  15 encaps="llc"
  16 payload="bridged"
  17 lan_mac=""
  18 wan_mac=""
  19 interface_wan=""
  20
  21 board=$(lantiq_board_name)
  22
  23 case "$board" in
  24 # adm6996
  25 ARV4510PW)
  26         lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
  27         wan_mac=$(macaddr_add "$lan_mac" 1)
  28         ucidef_add_switch "switch0" \
  29                 "3:lan:1" "2:lan:2" "1:lan:3" "0:lan:4" "5t@eth0"
  30         ;;
  31
  32 ARV4520PW)
  33         ucidef_add_switch "switch0" \
  34                 "3:lan:1" "2:lan:2" "1:lan:3" "0:lan:4" "5t@eth0"
  35         ;;
  36
  37 ACMP252|GIGASX76X)
  38         ucidef_add_switch "switch0" \
  39                 "4:lan:1" "3:lan:2" "2:lan:3" "1:lan:4" "5t@eth0"
  40         ;;
  41
  42 # ar8316
  43 ARV4519PW|ARV7510PW22|ARV7518PW|ARV752DPW22|ARV8539PW22)
  44         ucidef_add_switch "switch0" \
  45                 "0t@eth0" "2:lan:1" "3:lan:2" "4:lan:3" "5:lan:4"
  46         ;;
  47
  48 # rtl8306g
  49 ARV7519PW)
  50         lan_mac=$(mtd_get_mac_binary board_config 22)
  51         wan_mac=$(macaddr_add "$lan_mac" 1)
  52         ucidef_add_switch "switch0" \
  53                 "0:lan:1" "1:lan:2" "2:lan:3" "3:lan:4" "4t@eth0"
  54         ;;
  55
  56 WBMR)
  57         ucidef_add_switch "switch0" \
  58                 "0t@eth0" "2:lan:1" "3:lan:2" "4:lan:3" "5:lan:4"
  59         ;;
  60
  61 VG3503J)
  62         ucidef_set_interface_lan 'eth0'
  63         ;;
  64
  65 ARV4518PWR01*)
  66         ucidef_set_interface_lan 'eth0'
  67         ;;
  68
  69 DGN3500*)
  70         eth0_mac=$(mtd_get_mac_ascii uboot-env ethaddr)
  71         nas0_mac=$(macaddr_add "$eth0_mac" 1)
  72         ifconfig eth0 hw ether "$eth0_mac"
  73         ifconfig wlan0 hw ether "$eth0_mac"
  74         esi $(echo "$nas0_mac" | tr -d :)
  75         ucidef_add_switch "switch0" \
  76                 "3:lan:1" "2:lan:2" "1:lan:3" "0:lan:4" "5t@eth0"
  77         ;;
  78
  79 FRITZ7360SL)
  80         ucidef_add_switch "switch0" \
  81                 "4:lan:1" "2:lan:2" "0:lan:3" "1:lan:4" "6t@eth0"
  82         ;;
  83
  84 GR7000)
  85         ucidef_set_interface_wan "eth0"
  86         ;;
  87
  88 H201L)
  89         ucidef_add_switch "switch0" \
  90                 "0:lan:1" "1:lan:2" "2:lan:3" "3:lan:4" "4t@eth0"
  91         ;;
  92
  93 #rtl8306g
  94 P2601HNFX)
  95         ucidef_add_switch "switch0" \
  96                 "0:lan:1" "1:lan:2" "2:lan:3" "3:lan:4" "5t@eth0"
  97         ;;
  98
  99 P2812HNUF*)
 100         lan_mac=$(mtd_get_mac_ascii uboot-env ethaddr)
 101         wan_mac=$(macaddr_add "$lan_mac" 1)
 102         ucidef_add_switch "switch0" \
 103                 "0:lan:1" "1:lan:2" "2:lan:3" "4:lan:4" "5:lan:5" "6t@eth0"
 104         ;;
 105
 106 TDW8970|TDW8980)
 107         lan_mac=$(mtd_get_mac_binary boardconfig 61696)
 108         wan_mac=$(macaddr_add "$lan_mac" 1)
 109         ucidef_add_switch "switch0" \
 110                 "0:lan:1" "2:lan:2" "4:lan:3" "5:lan:4" "6t@eth0"
 111         ;;
 112
 113 VR200v)
 114         lan_mac=$(mtd_get_mac_binary romfile 61696)
 115         wan_mac=$(macaddr_add "$lan_mac" 1)
 116         ucidef_add_switch "switch0" \
 117                 "0:lan:1" "2:lan:2" "4:lan:3" "5:lan:4" "6t@eth0"
 118         ;;
 119
 120 ARV7519RW22)
 121         lan_mac=$(mtd_get_mac_binary boardconfig 22)
 122         wan_mac=$(macaddr_add "$lan_mac" 1)
 123         ucidef_add_switch "switch0" \
 124                 "0:lan:1" "2:lan:2" "3:lan:3" "4:lan:4" "5:lan:5" "6t@eth0"
 125         ;;
 126
 127 BTHOMEHUBV2B|BTHOMEHUBV3A)
 128         lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
 129         wan_mac=$(macaddr_add "$lan_mac" 1)
 130         ucidef_set_interface_lan 'eth0'
 131         ;;
 132
 133 BTHOMEHUBV5A)
 134         lan_mac=$(mtd_get_mac_binary caldata 4364)
 135         wan_mac=$(macaddr_add "$lan_mac" 1)
 136         ucidef_add_switch "switch0" \
 137                 "0:lan:1" "1:lan:2" "2:lan:3" "4:lan:4" "6t@eth0"
 138         ;;
 139
 140 VGV7519)
 141         lan_mac=$(mtd_get_mac_binary board_config 22)
 142         wan_mac=$(macaddr_add "$lan_mac" 1)
 143         ucidef_add_switch "switch0" \
 144                 "4:lan:1" "2:lan:2" "1:lan:3" "0:lan:4" "6t@eth0"
 145         ;;
 146
 147 VGV7510KW22)
 148         lan_mac=$(mtd_get_mac_binary board_config 22)
 149         wan_mac=$(macaddr_add "$lan_mac" 1)
 150         ucidef_add_switch "switch0" \
 151                 "2:lan:1" "3:lan:2" "4:lan:3" "5:lan:4" "6t@eth0"
 152         ;;
 153 *)
 154         ucidef_set_interface_lan 'eth0'
 155         ;;
 156
 157 WBMR300)
 158         lan_mac=$(mtd_get_mac_ascii ubootconfig ethaddr)
 159         wan_mac="$lan_mac"
 160         ucidef_add_switch "switch0" \
 161                 "2:lan:1" "3:lan:2" "5:lan:3" "4:wan:1" "6t@eth0"
 162         ;;
 163
 164 esac
 165
 166 if [ -n "$(ls /lib/modules/`uname -r`/ltq_atm*)" ]; then
 167         ucidef_add_atm_bridge "$vpi" "$vci" "$encaps" "$payload"
 168 fi
 169
 170 if grep -qE "system type.*: (VR9|xRX200)" /proc/cpuinfo; then
 171         interface_wan="ptm0"
 172         ucidef_add_vdsl_modem "$annex" "av" "ptm"
 173 else
 174         interface_wan="nas0"
 175         ucidef_add_adsl_modem "$annex" "/lib/firmware/adsl.bin"
 176 fi
 177
 178 ucidef_set_interface_wan "$interface_wan" "pppoe"
 179
 180 [ -n "$lan_mac" ] && ucidef_set_interface_macaddr lan "$lan_mac"
 181 [ -n "$wan_mac" ] && ucidef_set_interface_macaddr wan "$wan_mac"
 182
 183 board_config_flush
 184
 185 exit 0