target/linux/lantiq/base-files/etc/board.d/02_network

   1 #!/bin/sh
   2 #
   3 # Copyright (C) 2011-2015 OpenWrt.org
   4 #
   5
   6 . /lib/functions/uci-defaults.sh
   7 . /lib/functions/system.sh
   8 . /lib/functions/lantiq.sh
   9
  10 board_config_update
  11
  12 vpi=1
  13 vci=32
  14 annex="a"
  15 tone="av"
  16 xfer_mode=""
  17 encaps="llc"
  18 payload="bridged"
  19 lan_mac=""
  20 wan_mac=""
  21 interface_wan="dsl0"
  22
  23 board=$(board_name)
  24
  25 case "$board" in
  26 ACMP252)
  27         ucidef_add_switch "switch0" \
  28                 "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5t@eth0"
  29         ;;
  30
  31 ALL0333CJ)
  32         annex="b"
  33         lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
  34         wan_mac=$(macaddr_add "$lan_mac" 1)
  35         ucidef_set_interface_lan 'eth0'
  36         ;;
  37
  38 ARV4510PW)
  39         lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
  40         wan_mac=$(macaddr_add "$lan_mac" 1)
  41         ucidef_add_switch "switch0" \
  42                 "0:lan:4" "2:lan:2" "1:lan:3" "3:lan:1" "5t@eth0"
  43         ;;
  44
  45 ARV4519PW|ARV7510PW22|ARV7518PW)
  46         ucidef_add_switch "switch0" \
  47                 "0t@eth0" "2:lan" "3:lan" "4:lan" "5:lan"
  48         ;;
  49
  50 ARV4520PW)
  51         annex="b"
  52         ucidef_add_switch "switch0" \
  53                 "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5t@eth0"
  54         ;;
  55
  56 ARV4525PW|ARV452CQW|ARV7525PW|ARV752DPW)
  57         annex="b"
  58         ucidef_set_interface_lan 'eth0'
  59         ;;
  60
  61 ARV7506PW11)
  62         annex="b"
  63         wan_mac=$(macaddr_add "$(mtd_get_mac_binary board_config 22)" 2)
  64         ucidef_add_switch "switch0" \
  65                 "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5t@eth0"
  66         ;;
  67
  68 ARV7519PW)
  69         wan_mac=$(macaddr_add "$(mtd_get_mac_binary board_config 22)" 1)
  70         ucidef_add_switch "switch0" \
  71                 "0:lan" "1:lan" "2:lan" "3:lan" "4t@eth0"
  72         ;;
  73
  74 ARV7519RW22)
  75         wan_mac=$(macaddr_add "$(mtd_get_mac_binary boardconfig 22)" 1)
  76         ucidef_add_switch "switch0" \
  77                 "0:lan:5" "2:lan:3" "3:lan:4" "4:lan:1" "5:lan:2" "6t@eth0"
  78         ;;
  79
  80 ARV752DPW22|ARV8539PW22)
  81         annex="b"
  82         ucidef_add_switch "switch0" \
  83                 "0t@eth0" "2:lan" "3:lan" "4:lan" "5:lan"
  84         ;;
  85
  86 ASL56026)
  87         lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
  88         wan_mac=$(mtd_get_mac_ascii uboot_env wanmac)
  89         ucidef_add_switch "switch0"\
  90                 "2:lan" "3:lan" "6t@eth0"
  91         ;;
  92
  93 BTHOMEHUBV2B)
  94         lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
  95         wan_mac=$(macaddr_add "$lan_mac" 1)
  96         ucidef_add_switch "switch0" \
  97                 "1:lan" "2:lan" "3:lan" "4:lan" "5t@eth0"
  98         ;;
  99
 100 BTHOMEHUBV3A)
 101         lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
 102         wan_mac=$(macaddr_add "$lan_mac" 1)
 103         ucidef_set_interface_lan 'eth0'
 104         ;;
 105
 106 BTHOMEHUBV5A)
 107         lan_mac=$(mtd_get_mac_binary_ubi caldata 4364)
 108         wan_mac=$(macaddr_add "$lan_mac" 1)
 109         ucidef_add_switch "switch0" \
 110                 "0:lan:3" "1:lan:4" "2:lan:2" "4:lan:1" "5:wan:5" "6t@eth0"
 111         ;;
 112
 113 DGN1000B)
 114         annex="b"
 115         ucidef_set_interface_lan 'eth0'
 116         ;;
 117
 118 DGN3500*)
 119         lan_mac=$(mtd_get_mac_ascii uboot-env ethaddr)
 120         wan_mac=$(macaddr_add "$lan_mac" 1)
 121         ucidef_add_switch "switch0" \
 122                 "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5t@eth0"
 123         ;;
 124
 125 DM200)
 126         lan_mac=$(mtd_get_mac_binary ART 0)
 127         wan_mac=$(macaddr_add "$lan_mac" 1)
 128         ucidef_set_interface_lan 'eth0'
 129         ;;
 130
 131 EASY80920NAND|EASY80920NOR)
 132         lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
 133         wan_mac=$(macaddr_add "$lan_mac" 1)
 134         ucidef_add_switch "switch0" \
 135                 "0:lan:4" "1:lan:3" "2:lan:2" "4:lan:1" "5:wan:5" "6t@eth0"
 136         ;;
 137
 138 FRITZ3370)
 139         annex="b"
 140         wan_mac=$(macaddr_add "$(mtd_get_mac_binary urlader 2439)" 1)
 141         ucidef_set_interface_lan 'eth0'
 142         ;;
 143
 144 FRITZ7320)
 145         annex="b"
 146         wan_mac=$(macaddr_add "$(mtd_get_mac_binary urlader 2705)" 1)
 147         ucidef_set_interface_lan 'eth0'
 148         ;;
 149
 150 FRITZ7360SL)
 151         annex="b"
 152         wan_mac=$(macaddr_add "$(mtd_get_mac_binary urlader 2705)" 1)
 153         ucidef_add_switch "switch0" \
 154                 "0:lan:3" "1:lan:4" "2:lan:2" "4:lan:1" "6t@eth0"
 155         ;;
 156
 157 GIGASX76X)
 158         annex="b"
 159         ucidef_add_switch "switch0" \
 160                 "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5t@eth0"
 161         ;;
 162
 163 H201L)
 164         annex="b"
 165         ucidef_add_switch "switch0" \
 166                 "0:lan" "1:lan" "2:lan" "3:lan" "4t@eth0"
 167         ;;
 168
 169 P2601HNFX)
 170         ucidef_add_switch "switch0" \
 171                 "0:lan" "1:lan" "2:lan" "3:lan" "5t@eth0"
 172         ;;
 173
 174 P2812HNUF*)
 175         lan_mac=$(mtd_get_mac_ascii uboot-env ethaddr)
 176         wan_mac=$(macaddr_add "$lan_mac" 1)
 177         ucidef_add_switch "switch0" \
 178                 "0:lan" "1:lan" "2:lan" "4:lan" "5:wan" "6t@eth0"
 179         ;;
 180
 181 TDW8970|TDW8980)
 182         wan_mac=$(macaddr_add "$(mtd_get_mac_binary boardconfig 61696)" 1)
 183         ucidef_add_switch "switch0" \
 184                 "0:lan:2" "2:lan:3" "4:lan:4" "5:lan:1" "6t@eth0"
 185         ;;
 186
 187 VG3503J)
 188         lan_mac=$(mtd_get_mac_ascii uboot-env ethaddr)
 189         wan_mac=$(macaddr_add "$lan_mac" 1)
 190         ucidef_add_switch "switch0" \
 191                 "2:lan:1" "4:lan:2" "6t@eth0"
 192         ;;
 193
 194 VR200v)
 195         wan_mac=$(macaddr_add "$(mtd_get_mac_binary romfile 61696)" 1)
 196         ucidef_add_switch "switch0" \
 197                 "0:lan" "2:lan" "4:lan" "5:lan" "6t@eth0"
 198         ;;
 199
 200 VGV7510KW22*)
 201         annex="b"
 202         wan_mac=$(macaddr_add "$(mtd_get_mac_binary board_config 22)" 2)
 203         ucidef_add_switch "switch0" \
 204                 "2:lan:2" "3:lan:1" "4:lan:4" "5:lan:3" "0:wan:5" "6t@eth0"
 205         ;;
 206
 207 VGV7519*)
 208         wan_mac=$(mtd_get_mac_binary board_config 22)
 209         ucidef_add_switch "switch0" \
 210                 "0:lan:4" "1:lan:3" "2:lan:2" "4:lan:1" "5:wan:5" "6t@eth0"
 211         ;;
 212
 213 WBMR)
 214         ucidef_add_switch "switch0" \
 215                 "0t@eth0" "2:lan" "3:lan" "4:lan" "5:lan"
 216         ;;
 217
 218 WBMR300)
 219         lan_mac=$(mtd_get_mac_ascii ubootconfig ethaddr)
 220         wan_mac="$lan_mac"
 221         ucidef_add_switch "switch0" \
 222                 "5:lan:2" "2:lan:3" "3:lan:4" "4:wan:1" "6t@eth0"
 223         ;;
 224
 225 *)
 226         ucidef_set_interface_lan 'eth0'
 227         ;;
 228
 229 esac
 230
 231 ls /lib/modules/$(uname -r)/ltq_atm* 1> /dev/null 2>&1 && \
 232         ucidef_add_atm_bridge "$vpi" "$vci" "$encaps" "$payload"
 233
 234 if lantiq_is_vdsl_system; then
 235         ucidef_add_vdsl_modem "$annex" "$tone" "$xfer_mode"
 236 else
 237         ucidef_add_adsl_modem "$annex" "/lib/firmware/adsl.bin"
 238 fi
 239
 240 ucidef_set_interface_wan "$interface_wan" "pppoe"
 241
 242 [ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" "$lan_mac"
 243 [ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" "$wan_mac"
 244
 245 board_config_flush
 246
 247 exit 0
 248