target/linux/lantiq/base-files/etc/board.d/02_network

   1 #!/bin/sh
   2 #
   3 # Copyright (C) 2011-2015 OpenWrt.org
   4 #
   5
   6 . /lib/functions/uci-defaults.sh
   7 . /lib/functions/system.sh
   8 . /lib/functions/lantiq.sh
   9
  10 board_config_update
  11
  12 vpi=1
  13 vci=32
  14 annex="a"
  15 tone="av"
  16 xfer_mode=""
  17 encaps="llc"
  18 payload="bridged"
  19 lan_mac=""
  20 wan_mac=""
  21 interface_wan="dsl0"
  22
  23 board=$(board_name)
  24
  25 case "$board" in
  26 ACMP252)
  27         ucidef_add_switch "switch0" \
  28                 "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5t@eth0"
  29         ;;
  30
  31 ALL0333CJ)
  32         annex="b"
  33         lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
  34         wan_mac=$(macaddr_add "$lan_mac" 1)
  35         ucidef_set_interface_lan 'eth0'
  36         ;;
  37
  38 ARV4510PW)
  39         lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
  40         wan_mac=$(macaddr_add "$lan_mac" 1)
  41         ucidef_add_switch "switch0" \
  42                 "0:lan:4" "2:lan:2" "1:lan:3" "3:lan:1" "5t@eth0"
  43         ;;
  44
  45 ARV4519PW|ARV7510PW22|ARV7518PW)
  46         ucidef_add_switch "switch0" \
  47                 "0t@eth0" "2:lan" "3:lan" "4:lan" "5:lan"
  48         ;;
  49
  50 ARV4520PW)
  51         annex="b"
  52         ucidef_add_switch "switch0" \
  53                 "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5t@eth0"
  54         ;;
  55
  56 ARV4525PW|ARV452CQW|ARV7525PW|ARV752DPW)
  57         annex="b"
  58         ucidef_set_interface_lan 'eth0'
  59         ;;
  60
  61 ARV7506PW11)
  62         annex="b"
  63         wan_mac=$(macaddr_add "$(mtd_get_mac_binary board_config 22)" 2)
  64         ucidef_add_switch "switch0" \
  65                 "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5t@eth0"
  66         ;;
  67
  68 ARV7519PW)
  69         wan_mac=$(macaddr_add "$(mtd_get_mac_binary board_config 22)" 1)
  70         ucidef_add_switch "switch0" \
  71                 "0:lan" "1:lan" "2:lan" "3:lan" "4t@eth0"
  72         ;;
  73
  74 ARV7519RW22)
  75         wan_mac=$(macaddr_add "$(mtd_get_mac_binary boardconfig 22)" 1)
  76         ucidef_add_switch "switch0" \
  77                 "0:lan:5" "2:lan:3" "3:lan:4" "4:lan:1" "5:lan:2" "6t@eth0"
  78         ;;
  79
  80 ARV752DPW22|ARV8539PW22)
  81         annex="b"
  82         ucidef_add_switch "switch0" \
  83                 "0t@eth0" "2:lan" "3:lan" "4:lan" "5:lan"
  84         ;;
  85
  86 ASL56026)
  87         lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
  88         wan_mac=$(mtd_get_mac_ascii uboot_env wanmac)
  89         ucidef_add_switch "switch0"\
  90                 "2:lan" "3:lan" "6t@eth0"
  91         ;;
  92
  93 BTHOMEHUBV2B)
  94         lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
  95         wan_mac=$(macaddr_add "$lan_mac" 1)
  96         ucidef_add_switch "switch0" \
  97                 "1:lan" "2:lan" "3:lan" "4:lan" "5t@eth0"
  98         ;;
  99
 100 BTHOMEHUBV3A)
 101         lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
 102         wan_mac=$(macaddr_add "$lan_mac" 1)
 103         ucidef_set_interface_lan 'eth0'
 104         ;;
 105
 106 BTHOMEHUBV5A)
 107         lan_mac=$(mtd_get_mac_binary_ubi caldata 4364)
 108         wan_mac=$(macaddr_add "$lan_mac" 1)
 109         ucidef_add_switch "switch0" \
 110                 "0:lan:3" "1:lan:4" "2:lan:2" "4:lan:1" "5:wan:5" "6t@eth0"
 111         ;;
 112
 113 DGN1000B)
 114         annex="b"
 115         ucidef_set_interface_lan 'eth0'
 116         ;;
 117
 118 DGN3500*)
 119         ucidef_add_switch "switch0" \
 120                 "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5t@eth0"
 121         ;;
 122
 123 DM200)
 124         lan_mac=$(mtd_get_mac_binary ART 0)
 125         wan_mac=$(macaddr_add "$lan_mac" 1)
 126         ucidef_set_interface_lan 'eth0'
 127         ;;
 128
 129 EASY80920NAND|EASY80920NOR)
 130         lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
 131         wan_mac=$(macaddr_add "$lan_mac" 1)
 132         ucidef_add_switch "switch0" \
 133                 "0:lan:4" "1:lan:3" "2:lan:2" "4:lan:1" "5:wan:5" "6t@eth0"
 134         ;;
 135
 136 FRITZ3370)
 137         annex="b"
 138         wan_mac=$(macaddr_add "$(mtd_get_mac_binary urlader 2439)" 1)
 139         ucidef_set_interface_lan 'eth0'
 140         ;;
 141
 142 FRITZ7320)
 143         annex="b"
 144         wan_mac=$(macaddr_add "$(mtd_get_mac_binary urlader 2705)" 1)
 145         ucidef_set_interface_lan 'eth0'
 146         ;;
 147
 148 FRITZ7360SL)
 149         annex="b"
 150         wan_mac=$(macaddr_add "$(mtd_get_mac_binary urlader 2705)" 1)
 151         ucidef_add_switch "switch0" \
 152                 "0:lan:3" "1:lan:4" "2:lan:2" "4:lan:1" "6t@eth0"
 153         ;;
 154
 155 GIGASX76X)
 156         annex="b"
 157         ucidef_add_switch "switch0" \
 158                 "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5t@eth0"
 159         ;;
 160
 161 H201L)
 162         annex="b"
 163         ucidef_add_switch "switch0" \
 164                 "0:lan" "1:lan" "2:lan" "3:lan" "4t@eth0"
 165         ;;
 166
 167 P2601HNFX)
 168         ucidef_add_switch "switch0" \
 169                 "0:lan" "1:lan" "2:lan" "3:lan" "5t@eth0"
 170         ;;
 171
 172 P2812HNUF*)
 173         lan_mac=$(mtd_get_mac_ascii uboot-env ethaddr)
 174         wan_mac=$(macaddr_add "$lan_mac" 1)
 175         ucidef_add_switch "switch0" \
 176                 "0:lan" "1:lan" "2:lan" "4:lan" "5:wan" "6t@eth0"
 177         ;;
 178
 179 TDW8970|TDW8980)
 180         wan_mac=$(macaddr_add "$(mtd_get_mac_binary boardconfig 61696)" 1)
 181         ucidef_add_switch "switch0" \
 182                 "0:lan:2" "2:lan:3" "4:lan:4" "5:lan:1" "6t@eth0"
 183         ;;
 184
 185 VG3503J)
 186         lan_mac=$(mtd_get_mac_ascii uboot-env ethaddr)
 187         wan_mac=$(macaddr_add "$lan_mac" 1)
 188         ucidef_add_switch "switch0" \
 189                 "2:lan:1" "4:lan:2" "6t@eth0"
 190         ;;
 191
 192 VR200v)
 193         wan_mac=$(macaddr_add "$(mtd_get_mac_binary romfile 61696)" 1)
 194         ucidef_add_switch "switch0" \
 195                 "0:lan" "2:lan" "4:lan" "5:lan" "6t@eth0"
 196         ;;
 197
 198 VGV7510KW22*)
 199         annex="b"
 200         wan_mac=$(macaddr_add "$(mtd_get_mac_binary board_config 22)" 2)
 201         ucidef_add_switch "switch0" \
 202                 "2:lan:2" "3:lan:1" "4:lan:4" "5:lan:3" "0:wan:5" "6t@eth0"
 203         ;;
 204
 205 VGV7519*)
 206         wan_mac=$(mtd_get_mac_binary board_config 22)
 207         ucidef_add_switch "switch0" \
 208                 "0:lan:4" "1:lan:3" "2:lan:2" "4:lan:1" "5:wan:5" "6t@eth0"
 209         ;;
 210
 211 WBMR)
 212         ucidef_add_switch "switch0" \
 213                 "0t@eth0" "2:lan" "3:lan" "4:lan" "5:lan"
 214         ;;
 215
 216 WBMR300)
 217         lan_mac=$(mtd_get_mac_ascii ubootconfig ethaddr)
 218         wan_mac="$lan_mac"
 219         ucidef_add_switch "switch0" \
 220                 "5:lan:2" "2:lan:3" "3:lan:4" "4:wan:1" "6t@eth0"
 221         ;;
 222
 223 *)
 224         ucidef_set_interface_lan 'eth0'
 225         ;;
 226
 227 esac
 228
 229 ls /lib/modules/$(uname -r)/ltq_atm* 1> /dev/null 2>&1 && \
 230         ucidef_add_atm_bridge "$vpi" "$vci" "$encaps" "$payload"
 231
 232 if lantiq_is_vdsl_system; then
 233         ucidef_add_vdsl_modem "$annex" "$tone" "$xfer_mode"
 234 else
 235         ucidef_add_adsl_modem "$annex" "/lib/firmware/adsl.bin"
 236 fi
 237
 238 ucidef_set_interface_wan "$interface_wan" "pppoe"
 239
 240 [ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" "$lan_mac"
 241 [ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" "$wan_mac"
 242
 243 board_config_flush
 244
 245 exit 0
 246