lantiq: move partitions into partion table node
[openwrt/openwrt.git] / target / linux / lantiq / dts / ACMP252.dts
1 /dts-v1/;
2
3 /include/ "danube.dtsi"
4
5 / {
6 model = "ACMP252 - AudioCodes MediaPack MP-252";
7
8 chosen {
9 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
10 };
11
12 memory@0 {
13 reg = <0x0 0x4000000>;
14 };
15
16 sram@1F000000 {
17 vmmc@107000 {
18 status = "okay";
19 gpios = <&gpio 31 0>;
20 };
21 };
22
23 fpi@10000000 {
24 localbus@0 {
25 nor-boot@0 {
26 compatible = "lantiq,nor";
27 bank-width = <2>;
28 reg = <0 0x0 0x2000000>;
29 #address-cells = <1>;
30 #size-cells = <1>;
31
32 partitions {
33 compatible = "fixed-partitions";
34 #address-cells = <1>;
35 #size-cells = <1>;
36
37 partition@0 {
38 label = "uboot";
39 reg = <0x0 0x20000>;
40 read-only;
41 };
42
43 partition@20000 {
44 label = "uboot_env";
45 reg = <0x20000 0x20000>;
46 };
47
48 partition@40000 {
49 label = "boardconfig";
50 reg = <0x40000 0x60000>;
51 read-only;
52 };
53
54 partition@a0000 {
55 label = "firmware";
56 reg = <0xa0000 0xf20000>;
57 };
58
59 partition@fc0000 {
60 label = "sysconfig";
61 reg = <0xfc0000 0x40000>;
62 };
63
64 partition@0x1000000 {
65 label = "rootfs_data";
66 reg = <0x1000000 0x1000000>;
67 };
68 };
69 };
70 };
71
72 gpio: pinmux@E100B10 {
73 pinctrl-names = "default";
74 pinctrl-0 = <&state_default>;
75
76 state_default: pinmux {
77 exin {
78 lantiq,groups = "exin1";
79 lantiq,function = "exin";
80 };
81 pci {
82 lantiq,groups = "gnt1", "req1";
83 lantiq,function = "pci";
84 };
85 };
86 };
87
88 ifxhcd@E101000 {
89 status = "okay";
90 gpios = <&gpio 3 0>;
91 };
92
93 etop@E180000 {
94 phy-mode = "rmii";
95 };
96
97 pci@E105400 {
98 status = "okay";
99 };
100 };
101 };