target/linux/lantiq/dts/ARV7506PW11.dts

   1 /dts-v1/;
   2
   3 #include "danube.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         model = "ARV7506PW11 - Alice/O2 IAD 4421";
   9
  10         aliases {
  11                 led-boot = &power;
  12                 led-failsafe = &power_red;
  13                 led-running = &power;
  14
  15                 led-dsl = &dsl;
  16                 led-internet = &internet;
  17                 led-wifi = &wlan;
  18         };
  19
  20         memory@0 {
  21                 reg = <0x0 0x4000000>;
  22         };
  23
  24         fpi@10000000 {
  25                 localbus@0 {
  26                         nor-boot@0 {
  27                                 compatible = "lantiq,nor";
  28                                 bank-width = <2>;
  29                                 reg = <0 0x0 0x800000>;
  30
  31                                 partitions {
  32                                         compatible = "fixed-partitions";
  33                                         #address-cells = <1>;
  34                                         #size-cells = <1>;
  35
  36                                         partition@0 {
  37                                                 label = "uboot";
  38                                                 reg = <0x00000 0x40000>;
  39                                                 read-only;
  40                                         };
  41
  42                                         partition@40000 {
  43                                                 label = "uboot_env";
  44                                                 reg = <0x40000 0x10000>;
  45                                                 read-only;
  46                                         };
  47
  48                                         partition@50000 {
  49                                                 label = "firmware";
  50                                                 reg = <0x50000 0x7a0000>;
  51                                         };
  52
  53                                         boardconfig: partition@7f0000 {
  54                                                 label = "board_config";
  55                                                 reg = <0x7f0000 0x10000>;
  56                                                 read-only;
  57                                         };
  58                                 };
  59                         };
  60                 };
  61
  62                 gpio: pinmux@E100B10 {
  63                         pinctrl-names = "default";
  64                         pinctrl-0 = <&state_default>;
  65
  66                         state_default: pinmux {
  67                                 pci {
  68                                         lantiq,groups = "gnt1";
  69                                         lantiq,function = "pci";
  70                                         lantiq,output = <1>;
  71                                 };
  72                                 pci_rst {
  73                                         lantiq,pins = "io21";
  74                                         lantiq,pull = <2>;
  75                                         lantiq,output = <1>;
  76                                 };
  77                         };
  78                 };
  79
  80                 /* GPIO 19: switch reset */
  81                 etop@E180000 {
  82                         phy-mode = "rmii";
  83                         mtd-mac-address = <&boardconfig 0x16>;
  84                 };
  85         };
  86
  87         gpio-keys-polled {
  88                 compatible = "gpio-keys-polled";
  89                 #address-cells = <1>;
  90                 #size-cells = <0>;
  91                 poll-interval = <100>;
  92
  93                 rfkill {
  94                         label = "rfkill";
  95                         gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
  96                         linux,code = <KEY_RFKILL>;
  97                 };
  98                 reset {
  99                         label = "reset";
 100                         gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
 101                         linux,code = <KEY_RESTART>;
 102                 };
 103         };
 104
 105         gpio-leds {
 106                 compatible = "gpio-leds";
 107                 wlan: wlan {
 108                         label = "arv7506pw11:green:wlan";
 109                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
 110                 };
 111                 power: power {
 112                         label = "arv7506pw11:green:power";
 113                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
 114                         default-state = "keep";
 115                 };
 116                 dsl: dsl {
 117                         label = "arv7506pw11:green:dsl";
 118                         gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
 119                 };
 120                 internet: internet {
 121                         label = "arv7506pw11:green:internet";
 122                         gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
 123                 };
 124                 power_red: power_red {
 125                         label = "arv7506pw11:red:power";
 126                         gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
 127                 };
 128                 internet_red {
 129                         label = "arv7506pw11:red:internet";
 130                         gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
 131                 };
 132                 info {
 133                         label = "arv7506pw11:green:info";
 134                         gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
 135                 };
 136                 telefon {
 137                         label = "arv7506pw11:green:telefon";
 138                         gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
 139                 };
 140                 info_red {
 141                         label = "arv7506pw11:red:info";
 142                         gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
 143                 };
 144         };
 145 };
 146
 147 &pci0 {
 148         status = "okay";
 149         lantiq,external-clock;
 150         gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
 151
 152         wifi@1814,3592 {
 153                 compatible = "pci1814,3592";
 154                 reg = <0x7000 0 0 0 0>;
 155                 ralink,mtd-eeprom = <&boardconfig 0x410>;
 156                 ralink,mtd-eeprom-swap;
 157                 mtd-mac-address = <&boardconfig 0x16>;
 158                 mtd-mac-address-increment = <1>;
 159         };
 160 };