target/linux/lantiq/dts/ARV7510PW22.dts

   1 /dts-v1/;
   2
   3 /include/ "danube.dtsi"
   4
   5 / {
   6         model = "ARV7510PW22 - Astoria Networks";
   7
   8         chosen {
   9                 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
  10
  11                 leds {
  12                         internet = &internet;
  13                         power = &power;
  14                         wifi = &wlan;
  15                 };
  16         };
  17
  18         memory@0 {
  19                 reg = <0x0 0x4000000>;
  20         };
  21
  22         sram@1F000000 {
  23                 vmmc@107000 {
  24                         status = "okay";
  25                         gpios = <&gpio 9 0>;
  26                 };
  27         };
  28
  29         fpi@10000000 {
  30                 localbus@0 {
  31                         nor-boot@0 {
  32                                 compatible = "lantiq,nor";
  33                                 bank-width = <2>;
  34                                 reg = <0 0x0 0x1000000>;
  35                                 #address-cells = <1>;
  36                                 #size-cells = <1>;
  37
  38                                 partition@0 {
  39                                         label = "uboot";
  40                                         reg = <0x00000 0x40000>;
  41                                         read-only;
  42                                 };
  43
  44                                 partition@40000 {
  45                                         label = "uboot_env";
  46                                         reg = <0x40000 0x20000>;
  47                                         read-only;
  48                                 };
  49
  50                                 partition@60000 {
  51                                         label = "firmware";
  52                                         reg = <0x60000 0xf80000>;
  53                                 };
  54
  55                                 partition@fe0000 {
  56                                         label = "board_config";
  57                                         reg = <0xfe0000 0x20000>;
  58                                         read-only;
  59                                 };
  60                         };
  61
  62                         mac_addr {
  63                                 compatible = "lantiq,eth-mac";
  64                                 reg = <0 0xfe0016 0x6>;
  65                                 mac-increment = <2>;
  66                         };
  67                 };
  68
  69                 gpio: pinmux@E100B10 {
  70                         pinctrl-names = "default";
  71                         pinctrl-0 = <&state_default>;
  72
  73                         state_default: pinmux {
  74                                 exin {
  75                                         lantiq,groups = "exin1";
  76                                         lantiq,function = "exin";
  77                                         lantiq,pull = <2>;
  78                                         lantiq,output = <0>;
  79                                 };
  80                                 pci_in {
  81                                         lantiq,groups = "req1", "req2";
  82                                         lantiq,function = "pci";
  83                                         lantiq,open-drain = <1>;
  84                                         lantiq,pull = <2>;
  85                                         lantiq,output = <0>;
  86                                 };
  87                                 pci_out {
  88                                         lantiq,groups = "gnt1";
  89                                         lantiq,function = "pci";
  90                                         lantiq,output = <1>;
  91                                 };
  92                                 pci_rst {
  93                                         lantiq,pins = "io21";
  94                                         lantiq,pull = <2>;
  95                                         lantiq,output = <1>;
  96                                 };
  97                                 pins_out {
  98                                         lantiq,pins = "io2", "io4", "io8", "io9", "io10", "io15", "io20";
  99                                         lantiq,output = <1>;
 100                                 };
 101                                 pins_in {
 102                                         lantiq,pins = "io11", "io12", "io28";
 103                                         lantiq,open-drain = <1>;
 104                                         lantiq,pull = <2>;
 105                                         lantiq,output = <0>;
 106                                 };
 107                         };
 108                 };
 109
 110                 ifxhcd@E101000 {
 111                         status = "okay";
 112                         gpios = <&gpio 8 0>;
 113                 };
 114
 115                 etop@E180000 {
 116                         phy-mode = "mii";
 117                         /* Switch reset 19 */
 118                 };
 119
 120                 pci@E105400 {
 121                         status = "okay";
 122                         lantiq,external-clock;
 123                         interrupt-map = <
 124                                 0x7000 0 0 1 &icu0 30
 125                                 0x7800 0 0 1 &icu0 135
 126                                 0x7800 0 0 2 &icu0 135
 127                                 0x7800 0 0 3 &icu0 135
 128                         >;
 129                         gpio-reset = <&gpio 21 0>;
 130                         req-mask = <0x3>;
 131                 };
 132         };
 133
 134         ralink_eep {
 135                 compatible = "ralink,eeprom";
 136                 ralink,eeprom = "RT2860.eeprom";
 137         };
 138
 139         gpio-keys-polled {
 140                 compatible = "gpio-keys-polled";
 141                 #address-cells = <1>;
 142                 #size-cells = <0>;
 143                 poll-interval = <100>;
 144
 145                 rfkill {
 146                         label = "rfkill";
 147                         gpios = <&gpio 11 1>;
 148                         linux,code = <0xf7>;
 149                 };
 150                 restart {
 151                         label = "restart";
 152                         gpios = <&gpio 12 1>;
 153                         linux,code = <0x100>;
 154                 };
 155                 reset {
 156                         label = "reset";
 157                         gpios = <&gpio 28 1>;
 158                         linux,code = <0x198>;
 159                 };
 160         };
 161
 162         gpio-leds {
 163                 compatible = "gpio-leds";
 164                 power: power {
 165                         label = "power";
 166                         gpios = <&gpio 2 1>;
 167                 };
 168                 internet: internet {
 169                         label = "internet";
 170                         gpios = <&gpio 4 1>;
 171                 };
 172                 wlan: wlan {
 173                         label = "wlan";
 174                         gpios = <&gpio 10 1>;
 175                 };
 176                 3g {
 177                         label = "3g";
 178                         gpios = <&gpio 15 1>;
 179                 };
 180                 message {
 181                         label = "message";
 182                         gpios = <&gpio 20 1>;
 183                 };
 184         };
 185 };