target/linux/lantiq/dts/ARV7510PW22.dts

   1 /dts-v1/;
   2
   3 /include/ "danube.dtsi"
   4
   5 / {
   6         model = "ARV7510PW22 - Astoria Networks";
   7
   8         chosen {
   9                 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
  10         };
  11
  12         aliases {
  13                 led-boot = &power;
  14                 led-failsafe = &power;
  15                 led-running = &power;
  16
  17                 led-internet = &internet;
  18                 led-usb = &umts;
  19                 led-wifi = &wlan;
  20         };
  21
  22         memory@0 {
  23                 reg = <0x0 0x4000000>;
  24         };
  25
  26         sram@1F000000 {
  27                 vmmc@107000 {
  28                         status = "okay";
  29                         gpios = <&gpio 9 0>;
  30                 };
  31         };
  32
  33         fpi@10000000 {
  34                 localbus@0 {
  35                         nor-boot@0 {
  36                                 compatible = "lantiq,nor";
  37                                 bank-width = <2>;
  38                                 reg = <0 0x0 0x1000000>;
  39                                 #address-cells = <1>;
  40                                 #size-cells = <1>;
  41
  42                                 partitions {
  43                                         compatible = "fixed-partitions";
  44                                         #address-cells = <1>;
  45                                         #size-cells = <1>;
  46
  47                                         partition@0 {
  48                                                 label = "uboot";
  49                                                 reg = <0x00000 0x40000>;
  50                                                 read-only;
  51                                         };
  52
  53                                         partition@40000 {
  54                                                 label = "uboot_env";
  55                                                 reg = <0x40000 0x20000>;
  56                                                 read-only;
  57                                         };
  58
  59                                         partition@60000 {
  60                                                 label = "firmware";
  61                                                 reg = <0x60000 0xf80000>;
  62                                         };
  63
  64                                         boardconfig: partition@fe0000 {
  65                                                 label = "board_config";
  66                                                 reg = <0xfe0000 0x20000>;
  67                                                 read-only;
  68                                         };
  69                                 };
  70                         };
  71                 };
  72
  73                 gpio: pinmux@E100B10 {
  74                         pinctrl-names = "default";
  75                         pinctrl-0 = <&state_default>;
  76
  77                         state_default: pinmux {
  78                                 exin {
  79                                         lantiq,groups = "exin1";
  80                                         lantiq,function = "exin";
  81                                         lantiq,pull = <2>;
  82                                         lantiq,output = <0>;
  83                                 };
  84                                 pci_in {
  85                                         lantiq,groups = "req1", "req2";
  86                                         lantiq,function = "pci";
  87                                         lantiq,open-drain = <1>;
  88                                         lantiq,pull = <2>;
  89                                         lantiq,output = <0>;
  90                                 };
  91                                 pci_out {
  92                                         lantiq,groups = "gnt1";
  93                                         lantiq,function = "pci";
  94                                         lantiq,output = <1>;
  95                                 };
  96                                 pci_rst {
  97                                         lantiq,pins = "io21";
  98                                         lantiq,pull = <2>;
  99                                         lantiq,output = <1>;
 100                                 };
 101                                 pins_out {
 102                                         lantiq,pins = "io2", "io4", "io8", "io9", "io10", "io15", "io20";
 103                                         lantiq,output = <1>;
 104                                 };
 105                                 pins_in {
 106                                         lantiq,pins = "io11", "io12", "io28";
 107                                         lantiq,open-drain = <1>;
 108                                         lantiq,pull = <2>;
 109                                         lantiq,output = <0>;
 110                                 };
 111                         };
 112                 };
 113
 114                 ifxhcd@E101000 {
 115                         status = "okay";
 116                         gpios = <&gpio 8 0>;
 117                 };
 118
 119                 etop@E180000 {
 120                         /* Switch reset 19 */
 121                         phy-mode = "mii";
 122                         mtd-mac-address = <&boardconfig 0x16>;
 123                 };
 124
 125                 pci@E105400 {
 126                         status = "okay";
 127                         lantiq,external-clock;
 128                         interrupt-map = <
 129                                 0x7000 0 0 1 &icu0 30
 130                                 0x7800 0 0 1 &icu0 135
 131                                 0x7800 0 0 2 &icu0 135
 132                                 0x7800 0 0 3 &icu0 135
 133                         >;
 134                         gpio-reset = <&gpio 21 0>;
 135                         req-mask = <0x3>;
 136                 };
 137         };
 138
 139         ralink_eep {
 140                 compatible = "ralink,eeprom";
 141                 ralink,eeprom = "RT2860.eeprom";
 142         };
 143
 144         gpio-keys-polled {
 145                 compatible = "gpio-keys-polled";
 146                 #address-cells = <1>;
 147                 #size-cells = <0>;
 148                 poll-interval = <100>;
 149
 150                 rfkill {
 151                         label = "rfkill";
 152                         gpios = <&gpio 11 1>;
 153                         linux,code = <0xf7>;
 154                 };
 155                 restart {
 156                         label = "restart";
 157                         gpios = <&gpio 12 1>;
 158                         linux,code = <0x100>;
 159                 };
 160                 reset {
 161                         label = "reset";
 162                         gpios = <&gpio 28 1>;
 163                         linux,code = <0x198>;
 164                 };
 165         };
 166
 167         gpio-leds {
 168                 compatible = "gpio-leds";
 169                 power: power {
 170                         label = "power";
 171                         gpios = <&gpio 2 1>;
 172                         default-state = "keep";
 173                 };
 174                 internet: internet {
 175                         label = "internet";
 176                         gpios = <&gpio 4 1>;
 177                 };
 178                 wlan: wlan {
 179                         label = "wlan";
 180                         gpios = <&gpio 10 1>;
 181                 };
 182                 umts: 3g {
 183                         label = "3g";
 184                         gpios = <&gpio 15 1>;
 185                 };
 186                 message {
 187                         label = "message";
 188                         gpios = <&gpio 20 1>;
 189                 };
 190         };
 191 };