c92c393b9311970f278708bbf21adb994d7dd741
[openwrt/openwrt.git] / target / linux / lantiq / dts / ARV7510PW22.dts
1 /dts-v1/;
2
3 /include/ "danube.dtsi"
4
5 / {
6 model = "ARV7510PW22 - Astoria Networks";
7
8 chosen {
9 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
10
11 leds {
12 boot = &power;
13 failsafe = &power;
14 running = &power;
15
16 internet = &internet;
17 wifi = &wlan;
18 };
19 };
20
21 memory@0 {
22 reg = <0x0 0x4000000>;
23 };
24
25 sram@1F000000 {
26 vmmc@107000 {
27 status = "okay";
28 gpios = <&gpio 9 0>;
29 };
30 };
31
32 fpi@10000000 {
33 localbus@0 {
34 nor-boot@0 {
35 compatible = "lantiq,nor";
36 bank-width = <2>;
37 reg = <0 0x0 0x1000000>;
38 #address-cells = <1>;
39 #size-cells = <1>;
40
41 partition@0 {
42 label = "uboot";
43 reg = <0x00000 0x40000>;
44 read-only;
45 };
46
47 partition@40000 {
48 label = "uboot_env";
49 reg = <0x40000 0x20000>;
50 read-only;
51 };
52
53 partition@60000 {
54 label = "firmware";
55 reg = <0x60000 0xf80000>;
56 };
57
58 partition@fe0000 {
59 label = "board_config";
60 reg = <0xfe0000 0x20000>;
61 read-only;
62 };
63 };
64
65 mac_addr {
66 compatible = "lantiq,eth-mac";
67 reg = <0 0xfe0016 0x6>;
68 mac-increment = <2>;
69 };
70 };
71
72 gpio: pinmux@E100B10 {
73 pinctrl-names = "default";
74 pinctrl-0 = <&state_default>;
75
76 state_default: pinmux {
77 exin {
78 lantiq,groups = "exin1";
79 lantiq,function = "exin";
80 lantiq,pull = <2>;
81 lantiq,output = <0>;
82 };
83 pci_in {
84 lantiq,groups = "req1", "req2";
85 lantiq,function = "pci";
86 lantiq,open-drain = <1>;
87 lantiq,pull = <2>;
88 lantiq,output = <0>;
89 };
90 pci_out {
91 lantiq,groups = "gnt1";
92 lantiq,function = "pci";
93 lantiq,output = <1>;
94 };
95 pci_rst {
96 lantiq,pins = "io21";
97 lantiq,pull = <2>;
98 lantiq,output = <1>;
99 };
100 pins_out {
101 lantiq,pins = "io2", "io4", "io8", "io9", "io10", "io15", "io20";
102 lantiq,output = <1>;
103 };
104 pins_in {
105 lantiq,pins = "io11", "io12", "io28";
106 lantiq,open-drain = <1>;
107 lantiq,pull = <2>;
108 lantiq,output = <0>;
109 };
110 };
111 };
112
113 ifxhcd@E101000 {
114 status = "okay";
115 gpios = <&gpio 8 0>;
116 };
117
118 etop@E180000 {
119 phy-mode = "mii";
120 /* Switch reset 19 */
121 };
122
123 pci@E105400 {
124 status = "okay";
125 lantiq,external-clock;
126 interrupt-map = <
127 0x7000 0 0 1 &icu0 30
128 0x7800 0 0 1 &icu0 135
129 0x7800 0 0 2 &icu0 135
130 0x7800 0 0 3 &icu0 135
131 >;
132 gpio-reset = <&gpio 21 0>;
133 req-mask = <0x3>;
134 };
135 };
136
137 ralink_eep {
138 compatible = "ralink,eeprom";
139 ralink,eeprom = "RT2860.eeprom";
140 };
141
142 gpio-keys-polled {
143 compatible = "gpio-keys-polled";
144 #address-cells = <1>;
145 #size-cells = <0>;
146 poll-interval = <100>;
147
148 rfkill {
149 label = "rfkill";
150 gpios = <&gpio 11 1>;
151 linux,code = <0xf7>;
152 };
153 restart {
154 label = "restart";
155 gpios = <&gpio 12 1>;
156 linux,code = <0x100>;
157 };
158 reset {
159 label = "reset";
160 gpios = <&gpio 28 1>;
161 linux,code = <0x198>;
162 };
163 };
164
165 gpio-leds {
166 compatible = "gpio-leds";
167 power: power {
168 label = "power";
169 gpios = <&gpio 2 1>;
170 default-state = "keep";
171 };
172 internet: internet {
173 label = "internet";
174 gpios = <&gpio 4 1>;
175 };
176 wlan: wlan {
177 label = "wlan";
178 gpios = <&gpio 10 1>;
179 };
180 3g {
181 label = "3g";
182 gpios = <&gpio 15 1>;
183 };
184 message {
185 label = "message";
186 gpios = <&gpio 20 1>;
187 };
188 };
189 };