target/linux/lantiq/dts/ARV7510PW22.dts

   1 /dts-v1/;
   2
   3 /include/ "danube.dtsi"
   4
   5 / {
   6         model = "ARV7510PW22 - Astoria Networks";
   7
   8         chosen {
   9                 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
  10
  11                 leds {
  12                         boot = &power;
  13                         failsafe = &power;
  14                         running = &power;
  15
  16                         internet = &internet;
  17                         wifi = &wlan;
  18                 };
  19         };
  20
  21         memory@0 {
  22                 reg = <0x0 0x4000000>;
  23         };
  24
  25         sram@1F000000 {
  26                 vmmc@107000 {
  27                         status = "okay";
  28                         gpios = <&gpio 9 0>;
  29                 };
  30         };
  31
  32         fpi@10000000 {
  33                 localbus@0 {
  34                         nor-boot@0 {
  35                                 compatible = "lantiq,nor";
  36                                 bank-width = <2>;
  37                                 reg = <0 0x0 0x1000000>;
  38                                 #address-cells = <1>;
  39                                 #size-cells = <1>;
  40
  41                                 partitions {
  42                                         compatible = "fixed-partitions";
  43                                         #address-cells = <1>;
  44                                         #size-cells = <1>;
  45
  46                                         partition@0 {
  47                                                 label = "uboot";
  48                                                 reg = <0x00000 0x40000>;
  49                                                 read-only;
  50                                         };
  51
  52                                         partition@40000 {
  53                                                 label = "uboot_env";
  54                                                 reg = <0x40000 0x20000>;
  55                                                 read-only;
  56                                         };
  57
  58                                         partition@60000 {
  59                                                 label = "firmware";
  60                                                 reg = <0x60000 0xf80000>;
  61                                         };
  62
  63                                         boardconfig: partition@fe0000 {
  64                                                 label = "board_config";
  65                                                 reg = <0xfe0000 0x20000>;
  66                                                 read-only;
  67                                         };
  68                                 };
  69                         };
  70                 };
  71
  72                 gpio: pinmux@E100B10 {
  73                         pinctrl-names = "default";
  74                         pinctrl-0 = <&state_default>;
  75
  76                         state_default: pinmux {
  77                                 exin {
  78                                         lantiq,groups = "exin1";
  79                                         lantiq,function = "exin";
  80                                         lantiq,pull = <2>;
  81                                         lantiq,output = <0>;
  82                                 };
  83                                 pci_in {
  84                                         lantiq,groups = "req1", "req2";
  85                                         lantiq,function = "pci";
  86                                         lantiq,open-drain = <1>;
  87                                         lantiq,pull = <2>;
  88                                         lantiq,output = <0>;
  89                                 };
  90                                 pci_out {
  91                                         lantiq,groups = "gnt1";
  92                                         lantiq,function = "pci";
  93                                         lantiq,output = <1>;
  94                                 };
  95                                 pci_rst {
  96                                         lantiq,pins = "io21";
  97                                         lantiq,pull = <2>;
  98                                         lantiq,output = <1>;
  99                                 };
 100                                 pins_out {
 101                                         lantiq,pins = "io2", "io4", "io8", "io9", "io10", "io15", "io20";
 102                                         lantiq,output = <1>;
 103                                 };
 104                                 pins_in {
 105                                         lantiq,pins = "io11", "io12", "io28";
 106                                         lantiq,open-drain = <1>;
 107                                         lantiq,pull = <2>;
 108                                         lantiq,output = <0>;
 109                                 };
 110                         };
 111                 };
 112
 113                 ifxhcd@E101000 {
 114                         status = "okay";
 115                         gpios = <&gpio 8 0>;
 116                 };
 117
 118                 etop@E180000 {
 119                         /* Switch reset 19 */
 120                         phy-mode = "mii";
 121                         mtd-mac-address = <&boardconfig 0x16>;
 122                 };
 123
 124                 pci@E105400 {
 125                         status = "okay";
 126                         lantiq,external-clock;
 127                         interrupt-map = <
 128                                 0x7000 0 0 1 &icu0 30
 129                                 0x7800 0 0 1 &icu0 135
 130                                 0x7800 0 0 2 &icu0 135
 131                                 0x7800 0 0 3 &icu0 135
 132                         >;
 133                         gpio-reset = <&gpio 21 0>;
 134                         req-mask = <0x3>;
 135                 };
 136         };
 137
 138         ralink_eep {
 139                 compatible = "ralink,eeprom";
 140                 ralink,eeprom = "RT2860.eeprom";
 141         };
 142
 143         gpio-keys-polled {
 144                 compatible = "gpio-keys-polled";
 145                 #address-cells = <1>;
 146                 #size-cells = <0>;
 147                 poll-interval = <100>;
 148
 149                 rfkill {
 150                         label = "rfkill";
 151                         gpios = <&gpio 11 1>;
 152                         linux,code = <0xf7>;
 153                 };
 154                 restart {
 155                         label = "restart";
 156                         gpios = <&gpio 12 1>;
 157                         linux,code = <0x100>;
 158                 };
 159                 reset {
 160                         label = "reset";
 161                         gpios = <&gpio 28 1>;
 162                         linux,code = <0x198>;
 163                 };
 164         };
 165
 166         gpio-leds {
 167                 compatible = "gpio-leds";
 168                 power: power {
 169                         label = "power";
 170                         gpios = <&gpio 2 1>;
 171                         default-state = "keep";
 172                 };
 173                 internet: internet {
 174                         label = "internet";
 175                         gpios = <&gpio 4 1>;
 176                 };
 177                 wlan: wlan {
 178                         label = "wlan";
 179                         gpios = <&gpio 10 1>;
 180                 };
 181                 3g {
 182                         label = "3g";
 183                         gpios = <&gpio 15 1>;
 184                 };
 185                 message {
 186                         label = "message";
 187                         gpios = <&gpio 20 1>;
 188                 };
 189         };
 190 };