target/linux/lantiq/dts/ARV7525PW.dts

   1 /dts-v1/;
   2
   3 /include/ "danube.dtsi"
   4
   5 / {
   6         model = "ARV7525PW - Speedport W303V Typ A";
   7
   8         chosen {
   9                 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
  10
  11                 leds {
  12                         boot = &power_green;
  13                         failsafe = &power_red;
  14                         running = &power_green;
  15
  16                         dsl = &power_green;
  17                         internet = &online;
  18                         wifi = &wifi;
  19                 };
  20         };
  21
  22         memory@0 {
  23                 reg = <0x0 0x2000000>;
  24         };
  25
  26         sram@1F000000 {
  27                 vmmc@107000 {
  28                         status = "okay";
  29                         gpios = <&gpio 31 0>;
  30                 };
  31         };
  32
  33         fpi@10000000 {
  34                 localbus@0 {
  35                         nor-boot@0 {
  36                                 compatible = "lantiq,nor";
  37                                 bank-width = <2>;
  38                                 reg = <0 0x0 0x2000000>;
  39                                 #address-cells = <1>;
  40                                 #size-cells = <1>;
  41
  42                                 partition@0 {
  43                                         label = "uboot";
  44                                         reg = <0x00000 0x10000>;
  45                                         read-only;
  46                                 };
  47
  48                                 partition@10000 {
  49                                         label = "uboot_env";
  50                                         reg = <0x10000 0x10000>;
  51                                         read-only;
  52                                 };
  53
  54                                 partition@20000 {
  55                                         label = "firmware";
  56                                         reg = <0x20000 0x3d0000>;
  57                                 };
  58
  59                                 partition@400000 {
  60                                         label = "board_config";
  61                                         reg = <0x3f0000 0x10000>;
  62                                         read-only;
  63                                 };
  64                         };
  65
  66                         mac_addr {
  67                                 compatible = "lantiq,eth-mac";
  68                                 reg = <0 0x3f0016 0x6>;
  69                                 mac-increment = <2>;
  70                         };
  71
  72                         ralink_eep {
  73                                 compatible = "ralink,eeprom";
  74                                 ralink,eeprom = "RT2860.eeprom";
  75                                 reg = <0 0x3f0410 0x110>;
  76                         };
  77                 };
  78
  79                 gpio: pinmux@E100B10 {
  80                         pinctrl-names = "default";
  81                         pinctrl-0 = <&state_default>;
  82
  83                         state_default: pinmux {
  84                                 exin {
  85                                         lantiq,groups = "exin1";
  86                                         lantiq,function = "exin";
  87                                 };
  88                                 pci {
  89                                         lantiq,groups = "gnt1", "req1";
  90                                         lantiq,function = "pci";
  91                                 };
  92                         };
  93                 };
  94
  95                 etop@E180000 {
  96                         phy-mode = "mii";
  97                 };
  98
  99                 pci@E105400 {
 100                         status = "okay";
 101                         interrupt-map = <0x7000 0 0 1 &icu0 135 1>;
 102                         req-mask = <0x1>;
 103                 };
 104
 105         };
 106
 107         gpio-keys-polled {
 108                 compatible = "gpio-keys-polled";
 109                 #address-cells = <1>;
 110                 #size-cells = <0>;
 111                 poll-interval = <100>;
 112
 113                 wps {
 114                         label = "wps";
 115                         gpios = <&gpio 29 1>;
 116                         linux,code = <0x211>;
 117                 };
 118                 reset {
 119                         label = "reset";
 120                         gpios = <&gpio 30 1>;
 121                         linux,code = <0x198>;
 122                 };
 123         };
 124
 125         gpio-leds {
 126                 compatible = "gpio-leds";
 127                 power_green: power {
 128                         label = "arv7525pw:green:power";
 129                         gpios = <&gpio 3 1>;
 130                         default-state = "keep";
 131                 };
 132                 power_red: power1 {
 133                         label = "arv7525pw:red:power";
 134                         gpios = <&gpio 4 1>;
 135                 };
 136                 online: online {
 137                         label = "arv7525pw:green:online";
 138                         gpios = <&gpio 5 1>;
 139                 };
 140                 voice {
 141                         label = "arv7525pw:green:telefonie";
 142                         gpios = <&gpio 6 1>;
 143                 };
 144                 voice2 {
 145                         label = "arv7525pw:red:telefonie";
 146                         gpios = <&gpio 8 1>;
 147                 };
 148                 wifi: wifi {
 149                         label = "arv7525pw:green:wlan";
 150                         gpios = <&gpio 9 1>;
 151                 };
 152         };
 153 };