lantiq: move dts files to thir own folder
[openwrt/openwrt.git] / target / linux / lantiq / dts / ARV752DPW22.dts
1 /dts-v1/;
2
3 /include/ "danube.dtsi"
4
5 / {
6 model = "ARV752DPW22 - Arcor 803";
7
8 chosen {
9 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
10 };
11
12 memory@0 {
13 reg = <0x0 0x4000000>;
14 };
15
16 sram@1F000000 {
17 vmmc@107000 {
18 status = "okay";
19 gpios = <&gpiomm 1 0>;
20 };
21 };
22
23 fpi@10000000 {
24 localbus@0 {
25 nor-boot@0 {
26 compatible = "lantiq,nor";
27 bank-width = <2>;
28 reg = <0 0x0 0x800000>;
29 #address-cells = <1>;
30 #size-cells = <1>;
31
32 partition@0 {
33 label = "uboot";
34 reg = <0x00000 0x10000>;
35 read-only;
36 };
37
38 partition@10000 {
39 label = "uboot_env";
40 reg = <0x10000 0x10000>;
41 read-only;
42 };
43
44 partition@20000 {
45 label = "linux";
46 reg = <0x20000 0x7d0000>;
47 };
48
49 partition@7f0000 {
50 label = "board_config";
51 reg = <0x7f0000 0x10000>;
52 read-only;
53 };
54 };
55
56 mac_addr {
57 compatible = "lantiq,eth-mac";
58 reg = <0 0x7f0016 0x6>;
59 mac-increment = <2>;
60 };
61
62 gpiomm: gpiomm@4000000 {
63 compatible = "lantiq,gpio-mm";
64 reg = <1 0x0 0x10 >;
65 #address-cells = <1>;
66 #size-cells = <1>;
67 #gpio-cells = <2>;
68 gpio-controller;
69 lantiq,shadow = <3>;
70 };
71 };
72
73 gpio: pinmux@E100B10 {
74 pinctrl-names = "default";
75 pinctrl-0 = <&state_default>;
76
77 state_default: pinmux {
78 ebu {
79 lantiq,groups = "ebu cs1";
80 lantiq,function = "ebu";
81 };
82 exin {
83 lantiq,groups = "exin1";
84 lantiq,function = "exin";
85 lantiq,pull = <2>;
86 lantiq,output = <0>;
87 };
88 pci_in {
89 lantiq,groups = "req1", "req2";
90 lantiq,function = "pci";
91 lantiq,open-drain = <1>;
92 lantiq,pull = <2>;
93 lantiq,output = <0>;
94 };
95 pci_out {
96 lantiq,groups = "gnt1";
97 lantiq,function = "pci";
98 lantiq,output = <1>;
99 };
100 pci_rst {
101 lantiq,pins = "io21";
102 lantiq,pull = <2>;
103 lantiq,output = <1>;
104 };
105 leds {
106 lantiq,pins = "io3", "io5", "io6", "io8";
107 lantiq,output = <1>;
108 };
109 };
110 };
111
112 ifxhcd@E101000 {
113 status = "okay";
114 gpios = <&gpiomm 0 0>;
115 };
116
117 etop@E180000 {
118 phy-mode = "rmii";
119 };
120
121 pci@E105400 {
122 status = "okay";
123 lantiq,external-clock;
124 interrupt-map = <
125 0x7000 0 0 1 &icu0 30
126 0x7800 0 0 1 &icu0 135
127 0x7800 0 0 2 &icu0 135
128 0x7800 0 0 3 &icu0 135
129 >;
130 gpio-reset = <&gpio 21 0>;
131 req-mask = <0x3>;
132 };
133
134 };
135
136 gpio-keys-polled {
137 compatible = "gpio-keys-polled";
138 #address-cells = <1>;
139 #size-cells = <0>;
140 poll-interval = <100>;
141
142 wps {
143 label = "wps";
144 gpios = <&gpio 11 1>;
145 linux,code = <0x211>;
146 };
147 restart {
148 label = "restart";
149 gpios = <&gpio 12 1>;
150 linux,code = <0x110>;
151 };
152 dsl {
153 label = "dsl";
154 gpios = <&gpio 13 1>;
155 linux,code = <0x111>;
156 };
157 reset {
158 label = "reset";
159 gpios = <&gpio 28 1>;
160 linux,code = <0x198>;
161 };
162 };
163
164 gpio-leds {
165 compatible = "gpio-leds";
166 power {
167 label = "power";
168 gpios = <&gpio 3 1>;
169 default-state = "on";
170 };
171 message {
172 label = "message";
173 gpios = <&gpio 5 1>;
174 default-state = "on";
175 };
176 power1 {
177 label = "power1";
178 gpios = <&gpio 6 1>;
179 default-state = "on";
180 };
181 voice1 {
182 label = "voice1";
183 gpios = <&gpio 8 1>;
184 default-state = "on";
185 };
186 microphone {
187 label = "microphone";
188 gpios = <&gpiomm 3 1>;
189 default-state = "on";
190 };
191 wifi {
192 label = "wifi_rt";
193 gpios = <&gpiomm 4 1>;
194 default-state = "on";
195 };
196 fxs1 {
197 label = "fxs1";
198 gpios = <&gpiomm 5 1>;
199 default-state = "on";
200 };
201 fxs2 {
202 label = "fxs2";
203 gpios = <&gpiomm 6 1>;
204 default-state = "on";
205 };
206 fxo {
207 label = "fxo";
208 gpios = <&gpiomm 7 1>;
209 default-state = "on";
210 };
211 dsl {
212 label = "dsl";
213 gpios = <&gpiomm 8 1>;
214 default-state = "on";
215 };
216 voice2 {
217 label = "voice2";
218 gpios = <&gpiomm 9 1>;
219 default-state = "on";
220 };
221 eth1 {
222 label = "eth1";
223 gpios = <&gpiomm 11 1>;
224 default-state = "on";
225 };
226 eth2 {
227 label = "eth2";
228 gpios = <&gpiomm 12 1>;
229 default-state = "on";
230 };
231 eth3 {
232 label = "eth3";
233 gpios = <&gpiomm 13 1>;
234 default-state = "on";
235 };
236 eth4 {
237 label = "eth4";
238 gpios = <&gpiomm 14 1>;
239 default-state = "on";
240 };
241 };
242 };