target/linux/lantiq/dts/BTHOMEHUBV5A.dts

   1 /dts-v1/;
   2
   3 /include/ "vr9.dtsi"
   4
   5 / {
   6         model = "BTHOMEHUBV5A - BT Home Hub 5A";
   7
   8         chosen {
   9                 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
  10
  11                 leds {
  12                         boot = &power_green;
  13                         failsafe = &power_red;
  14                         running = &power_blue;
  15
  16                         internet = &broadband_blue;
  17                         wifi = &wireless_blue;
  18                 };
  19         };
  20
  21         memory@0 {
  22                 reg = <0x0 0x8000000>;
  23         };
  24
  25         fpi@10000000 {
  26                 localbus@0 {
  27                         nand-parts@0 {
  28                                 compatible = "gen_nand", "lantiq,nand-xway";
  29                                 lantiq,cs = <1>;
  30                                 bank-width = <2>;
  31                                 reg = <0x1 0x0 0x2000000>;
  32                                 #address-cells = <1>;
  33                                 #size-cells = <1>;
  34
  35                                 partitions {
  36                                         compatible = "fixed-partitions";
  37                                         #address-cells = <1>;
  38                                         #size-cells = <1>;
  39
  40                                         partition@0 {
  41                                                 label = "u-boot";
  42                                                 reg = <0x0 0x40000>;
  43                                                 read-only;
  44                                         };
  45                                         partition@40000 {
  46                                                 label = "uboot-env";
  47                                                 reg = <0x40000 0x40000>;
  48                                         };
  49                                         caldata: partition@80000 {
  50                                                 label = "caldata";
  51                                                 reg = <0x80000 0x20000>;
  52                                                 read-only;
  53                                         };
  54                                         partition@a0000 {
  55                                                 label = "kernel";
  56                                                 reg = <0xa0000 0x200000>;
  57                                         };
  58                                         partition@2a0000 {
  59                                                 label = "ubi";
  60                                                 reg = <0x2a0000 0x7d60000>;
  61                                         };
  62                                 };
  63                         };
  64                 };
  65
  66                 gpio: pinmux@E100B10 {
  67                         pinctrl-names = "default";
  68                         pinctrl-0 = <&state_default>;
  69
  70                         interrupt-parent = <&icu0>;
  71                         interrupts = <166 135 66 40 41 42 38>;
  72
  73                         state_default: pinmux {
  74                                 mdio {
  75                                         lantiq,groups = "mdio";
  76                                         lantiq,function = "mdio";
  77                                 };
  78                                 pci_rst {
  79                                         lantiq,pins = "io21";
  80                                         lantiq,output = <1>;
  81                                         lantiq,open-drain;
  82                                 };
  83                                 pcie_rst {
  84                                         lantiq,pins = "io38";
  85                                         lantiq,pull = <0>;
  86                                         lantiq,output = <1>;
  87                                         lantiq,open-drain;
  88                                 };
  89                                 usb_vbus {
  90                                         lantiq,pins = "io33";
  91                                         lantiq,pull = <0>;
  92                                         lantiq,open-drain = <0>;
  93                                         lantiq,output = <1>;
  94                                 };
  95                                 nand_out {
  96                                         lantiq,groups = "nand cle", "nand ale";
  97                                         lantiq,function = "ebu";
  98                                         lantiq,output = <1>;
  99                                         lantiq,open-drain = <0>;
 100                                         lantiq,pull = <0>;
 101                                 };
 102                                 nand_cs1 {
 103                                         lantiq,groups = "nand cs1";
 104                                         lantiq,function = "ebu";
 105                                         lantiq,open-drain = <0>;
 106                                         lantiq,pull = <0>;
 107                                 };
 108                         };
 109                 };
 110
 111                 ifxhcd@E101000 {
 112                         status = "okay";
 113                         gpios = <&gpio 33 0>;
 114                 };
 115
 116                 pci@E105400 {
 117                         status = "okay";
 118                         lantiq,bus-clock = <33333333>;
 119                         interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 120                         interrupt-map = <0x7000 0 0 1 &icu0 30 1>;
 121                         gpio-reset = <&gpio 21 0>;
 122                 };
 123         };
 124
 125         gphy-xrx200 {
 126                 compatible = "lantiq,phy-xrx200";
 127                 firmware1 = "lantiq/vr9_phy11g_a1x.bin";        /*VR9 1.1*/
 128                 firmware2 = "lantiq/vr9_phy11g_a2x.bin";        /*VR9 1.2*/
 129                 phys = [ 00 01 ];
 130         };
 131
 132         ath9k_eep {
 133                 compatible = "ath9k,eeprom";
 134                 ath,eep-flash = <&caldata 0x1000>;
 135                 ath,mac-offset = <0x110c>;
 136                 ath,mac-increment = <2>;
 137                 ath,pci-slot = <0xe>; /* 14 */
 138         };
 139
 140         gpio-keys-polled {
 141                 compatible = "gpio-keys-polled";
 142                 #address-cells = <1>;
 143                 #size-cells = <0>;
 144                 poll-interval = <100>;
 145
 146                 reset {
 147                         label = "reset";
 148                         gpios = <&gpio 2 1>;
 149                         linux,code = <0x198>;
 150                 };
 151
 152                 wps {
 153                         label = "wps";
 154                         gpios = <&gpio 25 1>;
 155                         linux,code = <0x211>;
 156                 };
 157
 158                 restart {
 159                         label = "restart";
 160                         gpios = <&gpio 39 1>;
 161                         linux,code = <0x74>;
 162                 };
 163         };
 164
 165         gpio-leds {
 166                 compatible = "gpio-leds";
 167
 168                 /* broadband-* is a single RGB led */
 169                 broadband-red {
 170                         label = "bthomehubv5a:red:broadband";
 171                         gpios = <&gpio 0 1>;
 172                 };
 173                 broadband-green {
 174                         label = "bthomehubv5a:green:broadband";
 175                         gpios = <&gpio 3 1>;
 176                 };
 177                 broadband_blue: broadband-blue {
 178                         label = "bthomehubv5a:blue:broadband";
 179                         gpios = <&gpio 8 1>;
 180                 };
 181
 182                 /* wireless-* is a single RGB led */
 183                 wireless-red {
 184                         label = "bthomehubv5a:red:wireless";
 185                         gpios = <&gpio 9 1>;
 186                 };
 187                 wireless-green {
 188                         label = "bthomehubv5a:green:wireless";
 189                         gpios = <&gpio 10 1>;
 190                 };
 191                 wireless_blue: wireless-blue {
 192                         label = "bthomehubv5a:blue:wireless";
 193                         gpios = <&gpio 11 1>;
 194                 };
 195
 196                 /* power-* is a single RGB led */
 197                 power_red: power-red {
 198                         label = "bthomehubv5a:red:power";
 199                         gpios = <&gpio 12 1>;
 200                 };
 201                 power_green: power-green {
 202                         label = "bthomehubv5a:green:power";
 203                         gpios = <&gpio 14 1>;
 204                         default-state = "keep";
 205                 };
 206                 power_blue: power-blue {
 207                         label = "bthomehubv5a:blue:power";
 208                         gpios = <&gpio 15 1>;
 209                 };
 210
 211                 dimmed {
 212                         label = "dimmed";
 213                         gpios = <&gpio 19 0>;
 214                 };
 215         };
 216 };
 217
 218 &eth0 {
 219         lan: interface@0 {
 220                 compatible = "lantiq,xrx200-pdi";
 221                 #address-cells = <1>;
 222                 #size-cells = <0>;
 223                 reg = <0>;
 224                 mtd-mac-address = <&caldata 0x110c>;
 225                 lantiq,switch;
 226
 227                 ethernet@0 {
 228                         compatible = "lantiq,xrx200-pdi-port";
 229                         reg = <0>;
 230                         phy-mode = "rgmii";
 231                         phy-handle = <&phy0>;
 232                 };
 233                 ethernet@1 {
 234                         compatible = "lantiq,xrx200-pdi-port";
 235                         reg = <1>;
 236                         phy-mode = "rgmii";
 237                         phy-handle = <&phy1>;
 238                 };
 239                 ethernet@2 {
 240                         compatible = "lantiq,xrx200-pdi-port";
 241                         reg = <2>;
 242                         phy-mode = "gmii";
 243                         phy-handle = <&phy11>;
 244                 };
 245                 ethernet@4 {
 246                         compatible = "lantiq,xrx200-pdi-port";
 247                         reg = <4>;
 248                         phy-mode = "gmii";
 249                         phy-handle = <&phy13>;
 250                 };
 251         };
 252
 253         wan: interface@1 {
 254                 compatible = "lantiq,xrx200-pdi";
 255                 #address-cells = <1>;
 256                 #size-cells = <0>;
 257                 reg = <1>;
 258                 mtd-mac-address = <&caldata 0x110c>;
 259                 mtd-mac-address-increment = <4>;
 260                 lantiq,wan;
 261
 262                 ethernet@5 {
 263                         compatible = "lantiq,xrx200-pdi-port";
 264                         reg = <5>;
 265                         phy-mode = "rgmii";
 266                         phy-handle = <&phy5>;
 267                 };
 268         };
 269
 270         mdio@0 {
 271                 #address-cells = <1>;
 272                 #size-cells = <0>;
 273                 compatible = "lantiq,xrx200-mdio";
 274
 275                 phy0: ethernet-phy@0 {
 276                         reg = <0x0>;
 277                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 278                 };
 279                 phy1: ethernet-phy@1 {
 280                         reg = <0x1>;
 281                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 282                 };
 283                 phy5: ethernet-phy@5 {
 284                         reg = <0x5>;
 285                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 286                 };
 287                 phy11: ethernet-phy@11 {
 288                         reg = <0x11>;
 289                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 290                 };
 291                 phy13: ethernet-phy@13 {
 292                         reg = <0x13>;
 293                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 294                 };
 295         };
 296 };