target/linux/lantiq/dts/BTHOMEHUBV5A.dts

   1 /dts-v1/;
   2
   3 /include/ "vr9.dtsi"
   4
   5 / {
   6         model = "BTHOMEHUBV5A - BT Home Hub 5A";
   7
   8         chosen {
   9                 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
  10
  11                 leds {
  12                         boot = &power_green;
  13                         failsafe = &power_red;
  14                         running = &power_blue;
  15
  16                         internet = &broadband_blue;
  17                         wifi = &wireless_blue;
  18                 };
  19         };
  20
  21         memory@0 {
  22                 reg = <0x0 0x8000000>;
  23         };
  24
  25         fpi@10000000 {
  26                 localbus@0 {
  27                         nand-parts@0 {
  28                                 compatible = "gen_nand", "lantiq,nand-xway";
  29                                 lantiq,cs = <1>;
  30                                 bank-width = <2>;
  31                                 reg = <0 0x0 0x2000000>;
  32                                 #address-cells = <1>;
  33                                 #size-cells = <1>;
  34
  35                                 partition@0 {
  36                                         label = "u-boot";
  37                                         reg = <0x0 0x40000>;
  38                                         read-only;
  39                                 };
  40                                 partition@40000 {
  41                                         label = "uboot-env";
  42                                         reg = <0x40000 0x40000>;
  43                                 };
  44                                 caldata: partition@80000 {
  45                                         label = "caldata";
  46                                         reg = <0x80000 0x20000>;
  47                                         read-only;
  48                                 };
  49                                 partition@a0000 {
  50                                         label = "kernel";
  51                                         reg = <0xa0000 0x200000>;
  52                                 };
  53                                 partition@2a0000 {
  54                                         label = "ubi";
  55                                         reg = <0x2a0000 0x7d60000>;
  56                                 };
  57                         };
  58                 };
  59
  60                 gpio: pinmux@E100B10 {
  61                         pinctrl-names = "default";
  62                         pinctrl-0 = <&state_default>;
  63
  64                         interrupt-parent = <&icu0>;
  65                         interrupts = <166 135 66 40 41 42 38>;
  66
  67                         state_default: pinmux {
  68                                 mdio {
  69                                         lantiq,groups = "mdio";
  70                                         lantiq,function = "mdio";
  71                                 };
  72                                 pci_rst {
  73                                         lantiq,pins = "io21";
  74                                         lantiq,output = <1>;
  75                                         lantiq,open-drain;
  76                                 };
  77                                 pcie_rst {
  78                                         lantiq,pins = "io38";
  79                                         lantiq,pull = <0>;
  80                                         lantiq,output = <1>;
  81                                         lantiq,open-drain;
  82                                 };
  83                                 usb_vbus {
  84                                         lantiq,pins = "io33";
  85                                         lantiq,pull = <0>;
  86                                         lantiq,open-drain = <0>;
  87                                         lantiq,output = <1>;
  88                                 };
  89                                 nand_out {
  90                                         lantiq,groups = "nand cle", "nand ale";
  91                                         lantiq,function = "ebu";
  92                                         lantiq,output = <1>;
  93                                         lantiq,open-drain = <0>;
  94                                         lantiq,pull = <0>;
  95                                 };
  96                                 nand_cs1 {
  97                                         lantiq,groups = "nand cs1";
  98                                         lantiq,function = "ebu";
  99                                         lantiq,open-drain = <0>;
 100                                         lantiq,pull = <0>;
 101                                 };
 102                         };
 103                 };
 104
 105                 eth@E108000 {
 106                         #address-cells = <1>;
 107                         #size-cells = <0>;
 108                         compatible = "lantiq,xrx200-net";
 109                         reg = < 0xE108000 0x3000        /* switch */
 110                                 0xE10B100 0x70          /* mdio */
 111                                 0xE10B1D8 0x30          /* mii */
 112                                 0xE10B308 0x30 >;       /* pmac */
 113                         interrupt-parent = <&icu0>;
 114                         interrupts = <73 72>;
 115
 116                         lan: interface@0 {
 117                                 compatible = "lantiq,xrx200-pdi";
 118                                 #address-cells = <1>;
 119                                 #size-cells = <0>;
 120                                 reg = <0>;
 121                                 mtd-mac-address = <&caldata 0x110c>;
 122                                 lantiq,switch;
 123
 124                                 ethernet@0 {
 125                                         compatible = "lantiq,xrx200-pdi-port";
 126                                         reg = <0>;
 127                                         phy-mode = "rgmii";
 128                                         phy-handle = <&phy0>;
 129                                 };
 130                                 ethernet@1 {
 131                                         compatible = "lantiq,xrx200-pdi-port";
 132                                         reg = <1>;
 133                                         phy-mode = "rgmii";
 134                                         phy-handle = <&phy1>;
 135                                 };
 136                                 ethernet@2 {
 137                                         compatible = "lantiq,xrx200-pdi-port";
 138                                         reg = <2>;
 139                                         phy-mode = "gmii";
 140                                         phy-handle = <&phy11>;
 141                                 };
 142                                 ethernet@4 {
 143                                         compatible = "lantiq,xrx200-pdi-port";
 144                                         reg = <4>;
 145                                         phy-mode = "gmii";
 146                                         phy-handle = <&phy13>;
 147                                 };
 148                         };
 149
 150                         wan: interface@1 {
 151                                 compatible = "lantiq,xrx200-pdi";
 152                                 #address-cells = <1>;
 153                                 #size-cells = <0>;
 154                                 reg = <1>;
 155                                 mtd-mac-address = <&caldata 0x110c>;
 156                                 mtd-mac-address-increment = <4>;
 157                                 lantiq,wan;
 158
 159                                 ethernet@5 {
 160                                         compatible = "lantiq,xrx200-pdi-port";
 161                                         reg = <5>;
 162                                         phy-mode = "rgmii";
 163                                         phy-handle = <&phy5>;
 164                                 };
 165                         };
 166
 167                         mdio@0 {
 168                                 #address-cells = <1>;
 169                                 #size-cells = <0>;
 170                                 compatible = "lantiq,xrx200-mdio";
 171
 172                                 phy0: ethernet-phy@0 {
 173                                         reg = <0x0>;
 174                                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 175                                 };
 176                                 phy1: ethernet-phy@1 {
 177                                         reg = <0x1>;
 178                                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 179                                 };
 180                                 phy5: ethernet-phy@5 {
 181                                         reg = <0x5>;
 182                                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 183                                 };
 184                                 phy11: ethernet-phy@11 {
 185                                         reg = <0x11>;
 186                                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 187                                 };
 188                                 phy13: ethernet-phy@13 {
 189                                         reg = <0x13>;
 190                                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 191                                 };
 192                         };
 193                 };
 194
 195                 ifxhcd@E101000 {
 196                         status = "okay";
 197                         gpios = <&gpio 33 0>;
 198                 };
 199
 200                 pci@E105400 {
 201                         status = "okay";
 202                         lantiq,bus-clock = <33333333>;
 203                         interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 204                         interrupt-map = <0x7000 0 0 1 &icu0 30 1>;
 205                         gpio-reset = <&gpio 21 0>;
 206                 };
 207         };
 208
 209         gphy-xrx200 {
 210                 compatible = "lantiq,phy-xrx200";
 211                 firmware1 = "lantiq/vr9_phy11g_a1x.bin";        /*VR9 1.1*/
 212                 firmware2 = "lantiq/vr9_phy11g_a2x.bin";        /*VR9 1.2*/
 213                 phys = [ 00 01 ];
 214         };
 215
 216         ath9k_eep {
 217                 compatible = "ath9k,eeprom";
 218                 ath,eep-flash = <&caldata 0x1000>;
 219                 ath,mac-offset = <0x110c>;
 220                 ath,mac-increment = <2>;
 221                 ath,pci-slot = <0xe>; /* 14 */
 222         };
 223
 224         gpio-keys-polled {
 225                 compatible = "gpio-keys-polled";
 226                 #address-cells = <1>;
 227                 #size-cells = <0>;
 228                 poll-interval = <100>;
 229
 230                 reset {
 231                         label = "reset";
 232                         gpios = <&gpio 2 1>;
 233                         linux,code = <0x198>;
 234                 };
 235
 236                 wps {
 237                         label = "wps";
 238                         gpios = <&gpio 25 1>;
 239                         linux,code = <0x211>;
 240                 };
 241
 242                 restart {
 243                         label = "restart";
 244                         gpios = <&gpio 39 1>;
 245                         linux,code = <0x198>;
 246                 };
 247         };
 248
 249         gpio-leds {
 250                 compatible = "gpio-leds";
 251
 252                 /* broadband-* is a single RGB led */
 253                 broadband-red {
 254                         label = "bthomehubv5a:red:broadband";
 255                         gpios = <&gpio 0 1>;
 256                 };
 257                 broadband-green {
 258                         label = "bthomehubv5a:green:broadband";
 259                         gpios = <&gpio 3 1>;
 260                 };
 261                 broadband_blue: broadband-blue {
 262                         label = "bthomehubv5a:blue:broadband";
 263                         gpios = <&gpio 8 1>;
 264                 };
 265
 266                 /* wireless-* is a single RGB led */
 267                 wireless-red {
 268                         label = "bthomehubv5a:red:wireless";
 269                         gpios = <&gpio 9 1>;
 270                 };
 271                 wireless-green {
 272                         label = "bthomehubv5a:green:wireless";
 273                         gpios = <&gpio 10 1>;
 274                 };
 275                 wireless_blue: wireless-blue {
 276                         label = "bthomehubv5a:blue:wireless";
 277                         gpios = <&gpio 11 1>;
 278                 };
 279
 280                 /* power-* is a single RGB led */
 281                 power_red: power-red {
 282                         label = "bthomehubv5a:red:power";
 283                         gpios = <&gpio 12 1>;
 284                 };
 285                 power_green: power-green {
 286                         label = "bthomehubv5a:green:power";
 287                         gpios = <&gpio 14 1>;
 288                         default-state = "keep";
 289                 };
 290                 power_blue: power-blue {
 291                         label = "bthomehubv5a:blue:power";
 292                         gpios = <&gpio 15 1>;
 293                 };
 294
 295                 dimmed {
 296                         label = "dimmed";
 297                         gpios = <&gpio 19 0>;
 298                 };
 299         };
 300 };