target/linux/lantiq/dts/BTHOMEHUBV5A.dts

   1 /dts-v1/;
   2
   3 #include "vr9.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         model = "BTHOMEHUBV5A - BT Home Hub 5A";
   9
  10         chosen {
  11                 bootargs = "console=ttyLTQ0,115200";
  12         };
  13
  14         aliases {
  15                 led-boot = &power_green;
  16                 led-failsafe = &power_red;
  17                 led-running = &power_blue;
  18
  19                 led-dsl = &broadband_blue;
  20                 led-wifi = &wireless_blue;
  21         };
  22
  23         memory@0 {
  24                 reg = <0x0 0x8000000>;
  25         };
  26
  27         fpi@10000000 {
  28                 localbus@0 {
  29                         nand-parts@0 {
  30                                 compatible = "lantiq,nand-xway";
  31                                 lantiq,cs = <1>;
  32                                 bank-width = <2>;
  33                                 reg = <0x1 0x0 0x2000000>;
  34                                 #address-cells = <1>;
  35                                 #size-cells = <1>;
  36                                 nand-on-flash-bbt;
  37                                 nand-ecc-strength = <3>;
  38                                 nand-ecc-step-size = <256>;
  39
  40                                 partitions {
  41                                         compatible = "fixed-partitions";
  42                                         #address-cells = <1>;
  43                                         #size-cells = <1>;
  44
  45                                         partition@0 {
  46                                                 label = "u-boot";
  47                                                 reg = <0x0 0xa0000>;
  48                                                 read-only;
  49                                         };
  50                                         partition@a0000 {
  51                                                 label = "uboot-env";
  52                                                 reg = <0xa0000 0x20000>;
  53                                                 read-only;
  54                                         };
  55                                         partition@c0000 {
  56                                                 label = "unused";
  57                                                 reg = <0xc0000 0x40000>;
  58                                         };
  59                                         partition@100000 {
  60                                                 label = "ubi";
  61                                                 reg = <0x100000 0x7e80000>;
  62                                         };
  63                                         /*
  64                                          * last 512 KiB are for the bad block table, not writable
  65                                          */
  66                                 };
  67                         };
  68                 };
  69
  70                 gpio: pinmux@E100B10 {
  71                         pinctrl-names = "default";
  72                         pinctrl-0 = <&state_default>;
  73
  74                         state_default: pinmux {
  75                                 mdio {
  76                                         lantiq,groups = "mdio";
  77                                         lantiq,function = "mdio";
  78                                 };
  79                                 pci_rst {
  80                                         lantiq,pins = "io21";
  81                                         lantiq,output = <1>;
  82                                         lantiq,open-drain;
  83                                 };
  84                                 pcie_rst {
  85                                         lantiq,pins = "io38";
  86                                         lantiq,pull = <0>;
  87                                         lantiq,output = <1>;
  88                                         lantiq,open-drain;
  89                                 };
  90                                 usb_vbus {
  91                                         lantiq,pins = "io33";
  92                                         lantiq,pull = <0>;
  93                                         lantiq,open-drain = <0>;
  94                                         lantiq,output = <1>;
  95                                 };
  96                                 nand_out {
  97                                         lantiq,groups = "nand cle", "nand ale";
  98                                         lantiq,function = "ebu";
  99                                         lantiq,output = <1>;
 100                                         lantiq,open-drain = <0>;
 101                                         lantiq,pull = <0>;
 102                                 };
 103                                 nand_cs1 {
 104                                         lantiq,groups = "nand cs1";
 105                                         lantiq,function = "ebu";
 106                                         lantiq,open-drain = <0>;
 107                                         lantiq,pull = <0>;
 108                                 };
 109                         };
 110                 };
 111
 112                 ifxhcd@E101000 {
 113                         status = "okay";
 114                         gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
 115                 };
 116         };
 117
 118         gphy-xrx200 {
 119                 compatible = "lantiq,phy-xrx200";
 120                 firmware1 = "lantiq/vr9_phy11g_a1x.bin";        /*VR9 1.1*/
 121                 firmware2 = "lantiq/vr9_phy11g_a2x.bin";        /*VR9 1.2*/
 122                 phys = [ 00 01 ];
 123         };
 124
 125         gpio-keys-polled {
 126                 compatible = "gpio-keys-polled";
 127                 #address-cells = <1>;
 128                 #size-cells = <0>;
 129                 poll-interval = <100>;
 130
 131                 reset {
 132                         label = "reset";
 133                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
 134                         linux,code = <KEY_RESTART>;
 135                 };
 136
 137                 wps {
 138                         label = "wps";
 139                         gpios = <&gpio 25 GPIO_ACTIVE_LOW>;
 140                         linux,code = <KEY_WPS_BUTTON>;
 141                 };
 142
 143                 restart {
 144                         label = "restart";
 145                         gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
 146                         linux,code = <KEY_POWER>;
 147                 };
 148         };
 149
 150         gpio-leds {
 151                 compatible = "gpio-leds";
 152
 153                 /* broadband-* is a single RGB led */
 154                 broadband-red {
 155                         label = "bthomehubv5a:red:broadband";
 156                         gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
 157                 };
 158                 broadband-green {
 159                         label = "bthomehubv5a:green:broadband";
 160                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
 161                 };
 162                 broadband_blue: broadband-blue {
 163                         label = "bthomehubv5a:blue:broadband";
 164                         gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
 165                 };
 166
 167                 /* wireless-* is a single RGB led */
 168                 wireless-red {
 169                         label = "bthomehubv5a:red:wireless";
 170                         gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
 171                 };
 172                 wireless-green {
 173                         label = "bthomehubv5a:green:wireless";
 174                         gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
 175                 };
 176                 wireless_blue: wireless-blue {
 177                         label = "bthomehubv5a:blue:wireless";
 178                         gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
 179                 };
 180
 181                 /* power-* is a single RGB led */
 182                 power_red: power-red {
 183                         label = "bthomehubv5a:red:power";
 184                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
 185                 };
 186                 power_green: power-green {
 187                         label = "bthomehubv5a:green:power";
 188                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
 189                         default-state = "keep";
 190                 };
 191                 power_blue: power-blue {
 192                         label = "bthomehubv5a:blue:power";
 193                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
 194                 };
 195
 196                 dimmed {
 197                         label = "dimmed";
 198                         gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
 199                 };
 200         };
 201 };
 202
 203 &pci0 {
 204         status = "okay";
 205         gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
 206
 207         wifi@168c,002d {
 208                 compatible = "pci168c,002d";
 209                 reg = <0x7000 0 0 0 0>;
 210                 qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */
 211                 qca,disable-5ghz;
 212         };
 213 };
 214
 215 &eth0 {
 216         lan: interface@0 {
 217                 compatible = "lantiq,xrx200-pdi";
 218                 #address-cells = <1>;
 219                 #size-cells = <0>;
 220                 reg = <0>;
 221                 lantiq,switch;
 222
 223                 ethernet@0 {
 224                         compatible = "lantiq,xrx200-pdi-port";
 225                         reg = <0>;
 226                         phy-mode = "rgmii";
 227                         phy-handle = <&phy0>;
 228                 };
 229                 ethernet@1 {
 230                         compatible = "lantiq,xrx200-pdi-port";
 231                         reg = <1>;
 232                         phy-mode = "rgmii";
 233                         phy-handle = <&phy1>;
 234                 };
 235                 ethernet@2 {
 236                         compatible = "lantiq,xrx200-pdi-port";
 237                         reg = <2>;
 238                         phy-mode = "gmii";
 239                         phy-handle = <&phy11>;
 240                 };
 241                 ethernet@4 {
 242                         compatible = "lantiq,xrx200-pdi-port";
 243                         reg = <4>;
 244                         phy-mode = "gmii";
 245                         phy-handle = <&phy13>;
 246                 };
 247                 ethernet@5 {
 248                         compatible = "lantiq,xrx200-pdi-port";
 249                         reg = <5>;
 250                         phy-mode = "rgmii";
 251                         phy-handle = <&phy5>;
 252                 };
 253         };
 254
 255         mdio@0 {
 256                 #address-cells = <1>;
 257                 #size-cells = <0>;
 258                 compatible = "lantiq,xrx200-mdio";
 259
 260                 phy0: ethernet-phy@0 {
 261                         reg = <0x0>;
 262                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 263                 };
 264                 phy1: ethernet-phy@1 {
 265                         reg = <0x1>;
 266                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 267                 };
 268                 phy5: ethernet-phy@5 {
 269                         reg = <0x5>;
 270                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 271                 };
 272                 phy11: ethernet-phy@11 {
 273                         reg = <0x11>;
 274                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 275                 };
 276                 phy13: ethernet-phy@13 {
 277                         reg = <0x13>;
 278                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 279                 };
 280         };
 281 };