target/linux/lantiq/dts/BTHOMEHUBV5A.dts

   1 /dts-v1/;
   2
   3 #include "vr9.dtsi"
   4
   5 / {
   6         model = "BTHOMEHUBV5A - BT Home Hub 5A";
   7
   8         chosen {
   9                 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
  10         };
  11
  12         aliases {
  13                 led-boot = &power_green;
  14                 led-failsafe = &power_red;
  15                 led-running = &power_blue;
  16
  17                 led-internet = &broadband_blue;
  18                 led-wifi = &wireless_blue;
  19         };
  20
  21         memory@0 {
  22                 reg = <0x0 0x8000000>;
  23         };
  24
  25         cputemp@0 {
  26                 compatible = "lantiq,cputemp";
  27         };
  28
  29         fpi@10000000 {
  30                 localbus@0 {
  31                         nand-parts@0 {
  32                                 compatible = "gen_nand", "lantiq,nand-xway";
  33                                 lantiq,cs = <1>;
  34                                 bank-width = <2>;
  35                                 reg = <0x1 0x0 0x2000000>;
  36                                 #address-cells = <1>;
  37                                 #size-cells = <1>;
  38
  39                                 partitions {
  40                                         compatible = "fixed-partitions";
  41                                         #address-cells = <1>;
  42                                         #size-cells = <1>;
  43
  44                                         partition@0 {
  45                                                 label = "u-boot";
  46                                                 reg = <0x0 0x40000>;
  47                                                 read-only;
  48                                         };
  49                                         partition@40000 {
  50                                                 label = "uboot-env";
  51                                                 reg = <0x40000 0x40000>;
  52                                         };
  53                                         caldata: partition@80000 {
  54                                                 label = "caldata";
  55                                                 reg = <0x80000 0x20000>;
  56                                                 read-only;
  57                                         };
  58                                         partition@a0000 {
  59                                                 label = "kernel";
  60                                                 reg = <0xa0000 0x200000>;
  61                                         };
  62                                         partition@2a0000 {
  63                                                 label = "ubi";
  64                                                 reg = <0x2a0000 0x7d60000>;
  65                                         };
  66                                 };
  67                         };
  68                 };
  69
  70                 gpio: pinmux@E100B10 {
  71                         pinctrl-names = "default";
  72                         pinctrl-0 = <&state_default>;
  73
  74                         interrupt-parent = <&icu0>;
  75                         interrupts = <166 135 66 40 41 42 38>;
  76
  77                         state_default: pinmux {
  78                                 mdio {
  79                                         lantiq,groups = "mdio";
  80                                         lantiq,function = "mdio";
  81                                 };
  82                                 pci_rst {
  83                                         lantiq,pins = "io21";
  84                                         lantiq,output = <1>;
  85                                         lantiq,open-drain;
  86                                 };
  87                                 pcie_rst {
  88                                         lantiq,pins = "io38";
  89                                         lantiq,pull = <0>;
  90                                         lantiq,output = <1>;
  91                                         lantiq,open-drain;
  92                                 };
  93                                 usb_vbus {
  94                                         lantiq,pins = "io33";
  95                                         lantiq,pull = <0>;
  96                                         lantiq,open-drain = <0>;
  97                                         lantiq,output = <1>;
  98                                 };
  99                                 nand_out {
 100                                         lantiq,groups = "nand cle", "nand ale";
 101                                         lantiq,function = "ebu";
 102                                         lantiq,output = <1>;
 103                                         lantiq,open-drain = <0>;
 104                                         lantiq,pull = <0>;
 105                                 };
 106                                 nand_cs1 {
 107                                         lantiq,groups = "nand cs1";
 108                                         lantiq,function = "ebu";
 109                                         lantiq,open-drain = <0>;
 110                                         lantiq,pull = <0>;
 111                                 };
 112                         };
 113                 };
 114
 115                 ifxhcd@E101000 {
 116                         status = "okay";
 117                         gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
 118                 };
 119
 120                 pci@E105400 {
 121                         status = "okay";
 122                         lantiq,bus-clock = <33333333>;
 123                         interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 124                         interrupt-map = <0x7000 0 0 1 &icu0 30 1>;
 125                         gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
 126                 };
 127         };
 128
 129         gphy-xrx200 {
 130                 compatible = "lantiq,phy-xrx200";
 131                 firmware1 = "lantiq/vr9_phy11g_a1x.bin";        /*VR9 1.1*/
 132                 firmware2 = "lantiq/vr9_phy11g_a2x.bin";        /*VR9 1.2*/
 133                 phys = [ 00 01 ];
 134         };
 135
 136         ath9k_eep {
 137                 compatible = "ath9k,eeprom";
 138                 ath,eep-flash = <&caldata 0x1000>;
 139                 ath,mac-offset = <0x110c>;
 140                 ath,mac-increment = <2>;
 141                 ath,pci-slot = <0xe>; /* 14 */
 142         };
 143
 144         gpio-keys-polled {
 145                 compatible = "gpio-keys-polled";
 146                 #address-cells = <1>;
 147                 #size-cells = <0>;
 148                 poll-interval = <100>;
 149
 150                 reset {
 151                         label = "reset";
 152                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
 153                         linux,code = <KEY_RESTART>;
 154                 };
 155
 156                 wps {
 157                         label = "wps";
 158                         gpios = <&gpio 25 GPIO_ACTIVE_LOW>;
 159                         linux,code = <KEY_WPS_BUTTON>;
 160                 };
 161
 162                 restart {
 163                         label = "restart";
 164                         gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
 165                         linux,code = <KEY_POWER>;
 166                 };
 167         };
 168
 169         gpio-leds {
 170                 compatible = "gpio-leds";
 171
 172                 /* broadband-* is a single RGB led */
 173                 broadband-red {
 174                         label = "bthomehubv5a:red:broadband";
 175                         gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
 176                 };
 177                 broadband-green {
 178                         label = "bthomehubv5a:green:broadband";
 179                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
 180                 };
 181                 broadband_blue: broadband-blue {
 182                         label = "bthomehubv5a:blue:broadband";
 183                         gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
 184                 };
 185
 186                 /* wireless-* is a single RGB led */
 187                 wireless-red {
 188                         label = "bthomehubv5a:red:wireless";
 189                         gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
 190                 };
 191                 wireless-green {
 192                         label = "bthomehubv5a:green:wireless";
 193                         gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
 194                 };
 195                 wireless_blue: wireless-blue {
 196                         label = "bthomehubv5a:blue:wireless";
 197                         gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
 198                 };
 199
 200                 /* power-* is a single RGB led */
 201                 power_red: power-red {
 202                         label = "bthomehubv5a:red:power";
 203                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
 204                 };
 205                 power_green: power-green {
 206                         label = "bthomehubv5a:green:power";
 207                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
 208                         default-state = "keep";
 209                 };
 210                 power_blue: power-blue {
 211                         label = "bthomehubv5a:blue:power";
 212                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
 213                 };
 214
 215                 dimmed {
 216                         label = "dimmed";
 217                         gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
 218                 };
 219         };
 220 };
 221
 222 &eth0 {
 223         lan: interface@0 {
 224                 compatible = "lantiq,xrx200-pdi";
 225                 #address-cells = <1>;
 226                 #size-cells = <0>;
 227                 reg = <0>;
 228                 mtd-mac-address = <&caldata 0x110c>;
 229                 lantiq,switch;
 230
 231                 ethernet@0 {
 232                         compatible = "lantiq,xrx200-pdi-port";
 233                         reg = <0>;
 234                         phy-mode = "rgmii";
 235                         phy-handle = <&phy0>;
 236                 };
 237                 ethernet@1 {
 238                         compatible = "lantiq,xrx200-pdi-port";
 239                         reg = <1>;
 240                         phy-mode = "rgmii";
 241                         phy-handle = <&phy1>;
 242                 };
 243                 ethernet@2 {
 244                         compatible = "lantiq,xrx200-pdi-port";
 245                         reg = <2>;
 246                         phy-mode = "gmii";
 247                         phy-handle = <&phy11>;
 248                 };
 249                 ethernet@4 {
 250                         compatible = "lantiq,xrx200-pdi-port";
 251                         reg = <4>;
 252                         phy-mode = "gmii";
 253                         phy-handle = <&phy13>;
 254                 };
 255         };
 256
 257         wan: interface@1 {
 258                 compatible = "lantiq,xrx200-pdi";
 259                 #address-cells = <1>;
 260                 #size-cells = <0>;
 261                 reg = <1>;
 262                 mtd-mac-address = <&caldata 0x110c>;
 263                 mtd-mac-address-increment = <4>;
 264                 lantiq,wan;
 265
 266                 ethernet@5 {
 267                         compatible = "lantiq,xrx200-pdi-port";
 268                         reg = <5>;
 269                         phy-mode = "rgmii";
 270                         phy-handle = <&phy5>;
 271                 };
 272         };
 273
 274         mdio@0 {
 275                 #address-cells = <1>;
 276                 #size-cells = <0>;
 277                 compatible = "lantiq,xrx200-mdio";
 278
 279                 phy0: ethernet-phy@0 {
 280                         reg = <0x0>;
 281                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 282                 };
 283                 phy1: ethernet-phy@1 {
 284                         reg = <0x1>;
 285                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 286                 };
 287                 phy5: ethernet-phy@5 {
 288                         reg = <0x5>;
 289                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 290                 };
 291                 phy11: ethernet-phy@11 {
 292                         reg = <0x11>;
 293                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 294                 };
 295                 phy13: ethernet-phy@13 {
 296                         reg = <0x13>;
 297                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 298                 };
 299         };
 300 };