44723a1d52ecef924a39a077804c1ef123c83e72
[openwrt/openwrt.git] / target / linux / lantiq / dts / EASY80920.dtsi
1 /include/ "vr9.dtsi"
2
3 / {
4 chosen {
5 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
6
7 leds {
8 boot = &power;
9 failsafe = &power;
10 running = &power;
11
12 usb = &usb1;
13 usb2 = &usb2;
14 };
15 };
16
17 memory@0 {
18 reg = <0x0 0x4000000>;
19 };
20
21 fpi@10000000 {
22 #address-cells = <1>;
23 #size-cells = <1>;
24 compatible = "lantiq,fpi", "simple-bus";
25 ranges = <0x0 0x10000000 0xEEFFFFF>;
26 reg = <0x10000000 0xEF00000>;
27
28 localbus@0 {
29 #address-cells = <2>;
30 #size-cells = <1>;
31 compatible = "lantiq,localbus", "simple-bus";
32
33 };
34
35 gpio: pinmux@E100B10 {
36 compatible = "lantiq,pinctrl-xr9";
37 pinctrl-names = "default";
38 pinctrl-0 = <&state_default>;
39
40 interrupt-parent = <&icu0>;
41 interrupts = <166 135 66 40 41 42 38>;
42
43 #gpio-cells = <2>;
44 gpio-controller;
45 reg = <0xE100B10 0xA0>;
46
47 state_default: pinmux {
48 exin3 {
49 lantiq,groups = "exin3";
50 lantiq,function = "exin";
51 };
52 stp {
53 lantiq,groups = "stp";
54 lantiq,function = "stp";
55 };
56 nand {
57 lantiq,groups = "nand cle", "nand ale",
58 "nand rd", "nand rdy";
59 lantiq,function = "ebu";
60 };
61 mdio {
62 lantiq,groups = "mdio";
63 lantiq,function = "mdio";
64 };
65 pci {
66 lantiq,groups = "gnt1", "req1";
67 lantiq,function = "pci";
68 };
69 conf_out {
70 lantiq,pins = "io24", "io13", "io49", /* nand cle, ale and rd */
71 "io4", "io5", "io6", /* stp */
72 "io21",
73 "io33";
74 lantiq,open-drain;
75 lantiq,pull = <0>;
76 lantiq,output = <1>;
77 };
78 pcie-rst {
79 lantiq,pins = "io38";
80 lantiq,pull = <0>;
81 lantiq,output = <1>;
82 };
83 conf_in {
84 lantiq,pins = "io39", /* exin3 */
85 "io48"; /* nand rdy */
86 lantiq,pull = <2>;
87 };
88 };
89 pins_spi_default: pins_spi_default {
90 spi_in {
91 lantiq,groups = "spi_di";
92 lantiq,function = "spi";
93 };
94 spi_out {
95 lantiq,groups = "spi_do", "spi_clk",
96 "spi_cs4";
97 lantiq,function = "spi";
98 lantiq,output = <1>;
99 };
100 };
101 };
102
103 stp: stp@E100BB0 {
104 compatible = "lantiq,gpio-stp-xway";
105 reg = <0xE100BB0 0x40>;
106 #gpio-cells = <2>;
107 gpio-controller;
108
109 lantiq,shadow = <0xffff>;
110 lantiq,groups = <0x7>;
111 lantiq,dsl = <0x3>;
112 lantiq,phy1 = <0x7>;
113 lantiq,phy2 = <0x7>;
114 /* lantiq,rising; */
115 };
116
117 ifxhcd@E101000 {
118 status = "okay";
119 gpios = <&gpio 33 0>;
120 lantiq,portmask = <0x3>;
121 };
122
123 pci@E105400 {
124 #address-cells = <3>;
125 #size-cells = <2>;
126 #interrupt-cells = <1>;
127 compatible = "lantiq,pci-xway1";
128 bus-range = <0x0 0x0>;
129 ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000 /* pci memory */
130 0x1000000 0 0x00000000 0xAE00000 0 0x200000>; /* io space */
131 reg = <0x7000000 0x8000 /* config space */
132 0xE105400 0x400>; /* pci bridge */
133 lantiq,bus-clock = <33333333>;
134 /*lantiq,external-clock;*/
135 lantiq,delay-hi = <0>; /* 0ns delay */
136 lantiq,delay-lo = <0>; /* 0.0ns delay */
137 interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
138 interrupt-map = <
139 0x7000 0 0 1 &icu0 29 1 // slot 14, irq 29
140 >;
141 gpios-reset = <&gpio 21 0>;
142 req-mask = <0x1>; /* GNT1 */
143 };
144 };
145
146 gphy-xrx200 {
147 compatible = "lantiq,phy-xrx200";
148 firmware = "lantiq/vr9_phy11g_a2x.bin";
149 phys = [ 00 01 ];
150 };
151
152 gpio-keys-polled {
153 compatible = "gpio-keys-polled";
154 #address-cells = <1>;
155 #size-cells = <0>;
156 poll-interval = <100>;
157 /* reset {
158 label = "reset";
159 gpios = <&gpio 7 1>;
160 linux,code = <0x198>;
161 };*/
162 paging {
163 label = "paging";
164 gpios = <&gpio 11 1>;
165 linux,code = <0x100>;
166 };
167 };
168
169 gpio-leds {
170 compatible = "gpio-leds";
171
172 power: power {
173 label = "easy80920:green:power";
174 gpios = <&stp 9 0>;
175 default-state = "keep";
176 };
177 warning {
178 label = "easy80920:green:warning";
179 gpios = <&stp 22 0>;
180 };
181 fxs1 {
182 label = "easy80920:green:fxs1";
183 gpios = <&stp 21 0>;
184 };
185 fxs2 {
186 label = "easy80920:green:fxs2";
187 gpios = <&stp 20 0>;
188 };
189 fxo {
190 label = "easy80920:green:fxo";
191 gpios = <&stp 19 0>;
192 };
193 usb1: usb1 {
194 label = "easy80920:green:usb1";
195 gpios = <&stp 18 0>;
196 };
197 usb2: usb2 {
198 label = "easy80920:green:usb2";
199 gpios = <&stp 15 0>;
200 };
201 sd {
202 label = "easy80920:green:sd";
203 gpios = <&stp 14 0>;
204 };
205 wps {
206 label = "easy80920:green:wps";
207 gpios = <&stp 12 0>;
208 };
209 };
210 };
211
212 &spi {
213 pinctrl-names = "default";
214 pinctrl-0 = <&pins_spi_default>;
215
216 status = "ok";
217
218 m25p80@4 {
219 #address-cells = <1>;
220 #size-cells = <1>;
221 compatible = "jedec,spi-nor";
222 reg = <4 0>;
223 spi-max-frequency = <1000000>;
224
225 partition@0 {
226 reg = <0x0 0x20000>;
227 label = "SPI (RO) U-Boot Image";
228 read-only;
229 };
230
231 partition@20000 {
232 reg = <0x20000 0x10000>;
233 label = "ENV_MAC";
234 read-only;
235 };
236
237 partition@30000 {
238 reg = <0x30000 0x10000>;
239 label = "DPF";
240 read-only;
241 };
242
243 partition@40000 {
244 reg = <0x40000 0x10000>;
245 label = "NVRAM";
246 read-only;
247 };
248
249 partition@500000 {
250 reg = <0x50000 0x003a0000>;
251 label = "kernel";
252 };
253 };
254 };
255
256 &eth0 {
257 lan: interface@0 {
258 compatible = "lantiq,xrx200-pdi";
259 #address-cells = <1>;
260 #size-cells = <0>;
261 reg = <0>;
262 mac-address = [ 00 11 22 33 44 55 ];
263
264 ethernet@0 {
265 compatible = "lantiq,xrx200-pdi-port";
266 reg = <0>;
267 phy-mode = "rgmii";
268 phy-handle = <&phy0>;
269 };
270 ethernet@1 {
271 compatible = "lantiq,xrx200-pdi-port";
272 reg = <1>;
273 phy-mode = "rgmii";
274 phy-handle = <&phy1>;
275 };
276 ethernet@2 {
277 compatible = "lantiq,xrx200-pdi-port";
278 reg = <2>;
279 phy-mode = "gmii";
280 phy-handle = <&phy11>;
281 };
282 };
283
284 wan: interface@1 {
285 compatible = "lantiq,xrx200-pdi";
286 #address-cells = <1>;
287 #size-cells = <0>;
288 reg = <1>;
289 mac-address = [ 00 11 22 33 44 56 ];
290 lantiq,wan;
291 ethernet@5 {
292 compatible = "lantiq,xrx200-pdi-port";
293 reg = <5>;
294 phy-mode = "rgmii";
295 phy-handle = <&phy5>;
296 };
297 };
298
299 test: interface@2 {
300 compatible = "lantiq,xrx200-pdi";
301 #address-cells = <1>;
302 #size-cells = <0>;
303 reg = <2>;
304 mac-address = [ 00 11 22 33 44 57 ];
305 ethernet@4 {
306 compatible = "lantiq,xrx200-pdi-port";
307 reg = <4>;
308 phynmode0 = "gmii";
309 phy-handle = <&phy13>;
310 };
311 };
312
313 mdio@0 {
314 #address-cells = <1>;
315 #size-cells = <0>;
316 compatible = "lantiq,xrx200-mdio";
317 phy0: ethernet-phy@0 {
318 reg = <0x0>;
319 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
320 };
321 phy1: ethernet-phy@1 {
322 reg = <0x1>;
323 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
324 };
325 phy5: ethernet-phy@5 {
326 reg = <0x5>;
327 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
328 };
329 phy11: ethernet-phy@11 {
330 reg = <0x11>;
331 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
332 };
333 phy13: ethernet-phy@13 {
334 reg = <0x13>;
335 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
336 };
337 };
338 };