target/linux/lantiq/dts/FALCON-MDU.dts

   1 /dts-v1/;
   2
   3 #include <dt-bindings/gpio/gpio.h>
   4
   5 #include "falcon.dtsi"
   6 #include "falcon-sflash-16M.dtsi"
   7
   8 / {
   9         model = "Lantiq Falcon / Vinax MDU Board";
  10         compatible = "lantiq,falcon-mdu", "lantiq,falcon";
  11
  12         aliases {
  13                 spi0 = &ebu_cs0;
  14         };
  15
  16         memory@0 {
  17                 device_type = "memory";
  18                 reg = <0x0 0x4000000>;  // 64M at 0x0
  19         };
  20
  21         mdu-leds {
  22                 compatible = "gpio-leds";
  23                 pinctrl-names = "default";
  24                 pinctrl-0 = <&bootled_pins>;
  25
  26                 LED_0 {
  27                         label = "mdu:green:gpon";
  28                         gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
  29                         default-state = "keep";
  30                 };
  31                 LED_1 {
  32                         label = "mdu:green:status";
  33                         gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>;
  34                         default-state = "keep";
  35                 };
  36                 LED_2 {
  37                         label = "mdu:green:2";
  38                         gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
  39                         default-state = "keep";
  40                 };
  41                 LED_3 {
  42                         label = "mdu:green:3";
  43                         gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
  44                         default-state = "keep";
  45                 };
  46                 LED_4 {
  47                         label = "mdu:green:4";
  48                         gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
  49                         default-state = "keep";
  50                 };
  51         };
  52 };
  53