target/linux/lantiq/dts/FRITZ3370.dts

   1 /dts-v1/;
   2
   3 #include "vr9.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         model = "FRITZ3370 - Fritz!Box WLAN 3370";
   9
  10         chosen {
  11                 bootargs = "ubi.mtd=1,512 root=/dev/mtdblock9";
  12         };
  13
  14         aliases {
  15                 led-boot = &power_green;
  16                 led-failsafe = &power_red;
  17                 led-running = &power_green;
  18
  19                 led-dsl = &dsl;
  20                 led-internet = &info_green;
  21                 led-wifi = &wifi;
  22         };
  23
  24         memory@0 {
  25                 reg = <0x0 0x8000000>;
  26         };
  27
  28         fpi@10000000 {
  29                 localbus@0 {
  30                         nand-parts@0 {
  31                                 compatible = "gen_nand", "lantiq,nand-xway";
  32                                 bank-width = <2>;
  33                                 reg = <1 0x0 0x2000000>;
  34                                 #address-cells = <1>;
  35                                 #size-cells = <1>;
  36
  37                                 partitions {
  38                                         compatible = "fixed-partitions";
  39                                         #address-cells = <1>;
  40                                         #size-cells = <1>;
  41
  42                                         partition@0 {
  43                                                 label = "kernel";
  44                                                 reg = <0x0 0x400000>;
  45                                         };
  46
  47                                         partition@400000 {
  48                                                 label = "rootfs_ubi";
  49                                                 reg = <0x400000 0x3000000>;
  50                                         };
  51
  52                                         partition@3400000 {
  53                                                 label = "vr9_firmware";
  54                                                 reg = <0x3400000 0x400000>;
  55                                         };
  56                                         partition@3800000 {
  57                                                 label = "reserved";
  58                                                 reg = <0x3800000 0x3000000>;
  59                                         };
  60                                         partition@6800000 {
  61                                                 label = "config";
  62                                                 reg = <0x6800000 0x200000>;
  63                                         };
  64                                         partition@6a00000 {
  65                                                 label = "nand-filesystem";
  66                                                 reg = <0x6a00000 0x1600000>;
  67                                         };
  68                                 };
  69                         };
  70                 };
  71
  72                 gpio: pinmux@E100B10 {
  73                         pinctrl-names = "default";
  74                         pinctrl-0 = <&state_default>;
  75
  76                         state_default: pinmux {
  77                                 mdio {
  78                                         lantiq,groups = "mdio";
  79                                         lantiq,function = "mdio";
  80                                 };
  81                                 nand {
  82                                         lantiq,groups = "nand cle", "nand ale",
  83                                                         "nand rd", "nand cs1", "nand rdy";
  84                                         lantiq,function = "ebu";
  85                                         lantiq,pull = <1>;
  86                                 };
  87                                 phy-rst {
  88                                         lantiq,pins = "io37", "io44";
  89                                         lantiq,pull = <0>;
  90                                         lantiq,open-drain = <0>;
  91                                         lantiq,output = <1>;
  92                                 };
  93                                 pcie-rst {
  94                                         lantiq,pins = "io38";
  95                                         lantiq,pull = <0>;
  96                                         lantiq,output = <1>;
  97                                 };
  98                         };
  99                         pins_spi_default: pins_spi_default {
 100                                 spi_in {
 101                                         lantiq,groups = "spi_di";
 102                                         lantiq,function = "spi";
 103                                 };
 104                                 spi_out {
 105                                         lantiq,groups = "spi_do", "spi_clk",
 106                                                 "spi_cs4";
 107                                         lantiq,function = "spi";
 108                                         lantiq,output = <1>;
 109                                 };
 110                         };
 111                 };
 112
 113                 ifxhcd@E101000 {
 114                         status = "okay";
 115                         gpios = <&gpio 5 GPIO_ACTIVE_HIGH
 116                                 &gpio 14 GPIO_ACTIVE_HIGH>;
 117                         lantiq,portmask = <0x3>;
 118                 };
 119         };
 120
 121         gphy-xrx200 {
 122                 compatible = "lantiq,phy-xrx200";
 123                 firmware = "lantiq/vr9_phy11g_a1x.bin";
 124                 phys = [ 00 01 ];
 125         };
 126
 127         gpio-keys-polled {
 128                 compatible = "gpio-keys-polled";
 129                 #address-cells = <1>;
 130                 #size-cells = <0>;
 131                 poll-interval = <100>;
 132                 power {
 133                         label = "power";
 134                         gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
 135                         linux,code = <KEY_POWER>;
 136                 };
 137 /*              wifi {
 138                         label = "wifi";
 139                         gpios = <&gpio 29 GPIO_ACTIVE_HIGH>;
 140                         linux,code = <BTN_1>;
 141                 };*/
 142         };
 143
 144         gpio-leds {
 145                 compatible = "gpio-leds";
 146
 147                 power_green: power {
 148                         label = "fritz3370:green:power";
 149                         gpios = <&gpio 32 GPIO_ACTIVE_LOW>;
 150                         default-state = "keep";
 151                 };
 152                 power_red: power2 {
 153                         label = "fritz3370:red:power";
 154                         gpios = <&gpio 33 GPIO_ACTIVE_LOW>;
 155                 };
 156                 info_red {
 157                         label = "fritz3370:red:info";
 158                         gpios = <&gpio 34 GPIO_ACTIVE_LOW>;
 159                 };
 160                 wifi: wifi {
 161                         label = "fritz3370:green:wlan";
 162                         gpios = <&gpio 35 GPIO_ACTIVE_LOW>;
 163                 };
 164                 dsl: dsl {
 165                         label = "fritz3370:green:dsl";
 166                         gpios = <&gpio 36 GPIO_ACTIVE_LOW>;
 167                 };
 168                 lan {
 169                         label = "fritz3370:green:lan";
 170                         gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
 171                 };
 172                 info_green: info_green {
 173                         label = "fritz3370:green:info";
 174                         gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
 175                 };
 176         };
 177 };
 178
 179 &spi {
 180         pinctrl-names = "default";
 181         pinctrl-0 = <&pins_spi_default>;
 182
 183         status = "ok";
 184
 185         m25p80@4 {
 186                 #address-cells = <1>;
 187                 #size-cells = <1>;
 188                 compatible = "jedec,spi-nor";
 189                 reg = <4 0>;
 190                 spi-max-frequency = <1000000>;
 191
 192                 partition@0 {
 193                         reg = <0x0 0x20000>;
 194                         label = "urlader";
 195                         read-only;
 196                 };
 197
 198                 partition@20000 {
 199                         reg = <0x20000 0x10000>;
 200                         label = "tffs (1)";
 201                         read-only;
 202                 };
 203
 204                 partition@30000 {
 205                         reg = <0x30000 0x10000>;
 206                         label = "tffs (2)";
 207                         read-only;
 208                 };
 209         };
 210 };
 211
 212 &eth0 {
 213         lan: interface@0 {
 214                 compatible = "lantiq,xrx200-pdi";
 215                 #address-cells = <1>;
 216                 #size-cells = <0>;
 217                 reg = <0>;
 218                 mac-address = [ 00 11 22 33 44 55 ];
 219                 lantiq,switch;
 220
 221                 ethernet@0 {
 222                         compatible = "lantiq,xrx200-pdi-port";
 223                         reg = <0>;
 224                         phy-mode = "rgmii";
 225                         phy-handle = <&phy0>;
 226                         gpios = <&gpio 37 GPIO_ACTIVE_HIGH>;
 227                 };
 228                 ethernet@1 {
 229                         compatible = "lantiq,xrx200-pdi-port";
 230                         reg = <1>;
 231                         phy-mode = "rgmii";
 232                         phy-handle = <&phy1>;
 233                         gpios = <&gpio 44 GPIO_ACTIVE_HIGH>;
 234                 };
 235                 ethernet@2 {
 236                         compatible = "lantiq,xrx200-pdi-port";
 237                         reg = <2>;
 238                         phy-mode = "gmii";
 239                         phy-handle = <&phy11>;
 240                 };
 241                 ethernet@3 {
 242                         compatible = "lantiq,xrx200-pdi-port";
 243                         reg = <4>;
 244                         phy-mode = "gmii";
 245                         phy-handle = <&phy13>;
 246                 };
 247         };
 248
 249         mdio@0 {
 250                 #address-cells = <1>;
 251                 #size-cells = <0>;
 252                 compatible = "lantiq,xrx200-mdio";
 253                 phy0: ethernet-phy@0 {
 254                         reg = <0x0>;
 255                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 256                 };
 257                 phy1: ethernet-phy@1 {
 258                         reg = <0x1>;
 259                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 260                 };
 261                 phy11: ethernet-phy@11 {
 262                         reg = <0x11>;
 263                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 264                 };
 265                 phy13: ethernet-phy@13 {
 266                         reg = <0x13>;
 267                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 268                 };
 269         };
 270 };
 271
 272 &pcie0 {
 273         pcie@0 {
 274                 reg = <0 0 0 0 0>;
 275                 #interrupt-cells = <1>;
 276                 #size-cells = <2>;
 277                 #address-cells = <3>;
 278                 device_type = "pci";
 279
 280                 wifi@0,0 {
 281                         compatible = "pci0,0";
 282                         reg = <0 0 0 0 0>;
 283                         qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:01:00.0.bin */
 284                 };
 285         };
 286 };