lantiq - vgv7519: we don't have pcie bus so we don't need the reset device tree for...
[openwrt/openwrt.git] / target / linux / lantiq / dts / FRITZ7320.dts
1 /dts-v1/;
2
3 /include/ "ar9.dtsi"
4
5 / {
6 model = "FRITZ7320 - 1&1 HomeServer";
7
8 chosen {
9 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
10 };
11
12 memory@0 {
13 reg = <0x0 0x4000000>;
14 };
15
16 fpi@10000000 {
17 localbus@0 {
18 nor-boot@0 {
19 compatible = "lantiq,nor";
20 bank-width = <2>;
21 reg = <0 0x0 0x1000000>;
22 #address-cells = <1>;
23 #size-cells = <1>;
24
25 partition@0 {
26 label = "urlader";
27 reg = <0x00000 0x20000>;
28 read-only;
29 };
30
31 partition@20000 {
32 label = "firmware";
33 reg = <0x20000 0xf60000>;
34 };
35
36 partition@f80000 {
37 label = "tffs (1)";
38 reg = <0xf80000 0x40000>;
39 read-only;
40 };
41
42 partition@fc0000 {
43 label = "tffs (2)";
44 reg = <0xfc0000 0x40000>;
45 read-only;
46 };
47 };
48 };
49
50 gpio: pinmux@E100B10 {
51 pinctrl-names = "default";
52 pinctrl-0 = <&state_default>;
53
54 state_default: pinmux {
55 pci {
56 lantiq,groups = "gnt1", "req1", "req2", "req3", "req4", "gnt2", "gnt3", "gnt4";
57 lantiq,function = "pci";
58 };
59 pci-in {
60 lantiq,groups = "req1", "req2", "req3", "req4";
61 lantiq,output = <0>;
62 lantiq,open-drain = <1>;
63 lantiq,pull = <2>;
64 };
65 pci-out {
66 lantiq,groups = "gnt1", "gnt2", "gnt3", "gnt4";
67 lantiq,output = <1>;
68 lantiq,pull = <0>;
69 };
70 };
71 };
72
73 etop@E180000 {
74 phy-mode = "mii";
75 mac-address = [ 00 11 22 33 44 55 ];
76 };
77
78 ifxhcd@E101000 {
79 status = "okay";
80 };
81
82 pci@E105400 {
83 status = "okay";
84 req-mask = <0xf>;
85 lantiq,bus-clock = <33333333>;
86 interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
87 interrupt-map = <0x7000 0 0 1 &icu0 30 1>;
88 gpio-reset = <&gpio 21 0>;
89 req-mask = <0xf>; /* GNT1 */
90 };
91 };
92
93 gpio-keys-polled {
94 compatible = "gpio-keys-polled";
95 #address-cells = <1>;
96 #size-cells = <0>;
97 poll-interval = <100>;
98
99 rfkill {
100 label = "rfkill";
101 gpios = <&gpio 1 1>;
102 linux,code = <0xf7>;
103 };
104 dect {
105 label = "dect";
106 gpios = <&gpio 2 1>;
107 linux,code = <0x102>;
108 };
109 };
110
111 gpio-leds {
112 compatible = "gpio-leds";
113 power {
114 label = "power";
115 gpios = <&gpio 44 1>;
116 };
117 voice {
118 label = "voice";
119 gpios = <&gpio 47 1>;
120 };
121 dect {
122 label = "dect";
123 gpios = <&gpio 38 1>;
124 };
125 wlan {
126 label = "wlan";
127 gpios = <&gpio 37 1>;
128 };
129 online {
130 label = "online";
131 gpios = <&gpio 35 1>;
132 };
133 online2 {
134 label = "online2";
135 gpios = <&gpio 45 1>;
136 };
137 };
138 };