target/linux/lantiq/dts/FRITZ7360SL.dts

   1 /dts-v1/;
   2
   3 #include "vr9.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         model = "FRITZ7360SL - 1&1 HomeServer";
   9
  10         chosen {
  11                 bootargs = "console=ttyLTQ0,115200";
  12         };
  13
  14         aliases {
  15                 led-boot = &power_green;
  16                 led-failsafe = &power_red;
  17                 led-running = &power_green;
  18
  19                 led-internet = &info_green;
  20                 led-wifi = &wifi;
  21         };
  22
  23         memory@0 {
  24                 reg = <0x0 0x8000000>;
  25         };
  26
  27         fpi@10000000 {
  28                 localbus@0 {
  29                         nor-boot@0 {
  30                                 compatible = "lantiq,nor";
  31                                 bank-width = <2>;
  32                                 reg = <0 0x0 0x1000000>;
  33                                 #address-cells = <1>;
  34                                 #size-cells = <1>;
  35                                 partitions {
  36                                         compatible = "fixed-partitions";
  37                                         #address-cells = <1>;
  38                                         #size-cells = <1>;
  39                                         urlader: partition@0 {
  40                                                 label = "urlader";
  41                                                 reg = <0x00000 0x20000>;
  42                                                 read-only;
  43                                         };
  44
  45                                         partition@20000 {
  46                                                 label = "firmware";
  47                                                 reg = <0x20000 0xf60000>;
  48                                         };
  49
  50                                         partition@f80000 {
  51                                                 label = "tffs (1)";
  52                                                 reg = <0xf80000 0x40000>;
  53                                                 read-only;
  54                                         };
  55
  56                                         partition@fc0000 {
  57                                                 label = "tffs (2)";
  58                                                 reg = <0xfc0000 0x40000>;
  59                                                 read-only;
  60                                         };
  61                                 };
  62                         };
  63                 };
  64
  65                 gpio: pinmux@E100B10 {
  66                         pinctrl-names = "default";
  67                         pinctrl-0 = <&state_default>;
  68
  69                         state_default: pinmux {
  70                                 mdio {
  71                                         lantiq,groups = "mdio";
  72                                         lantiq,function = "mdio";
  73                                 };
  74                                 phy-rst {
  75                                         lantiq,pins = "io37", "io44";
  76                                         lantiq,pull = <0>;
  77                                         lantiq,open-drain;
  78                                         lantiq,output = <1>;
  79                                 };
  80                                 pcie-rst {
  81                                         lantiq,pins = "io38";
  82                                         lantiq,pull = <0>;
  83                                         lantiq,output = <1>;
  84                                 };
  85                         };
  86                 };
  87
  88                 ifxhcd@E101000 {
  89                         status = "okay";
  90                         lantiq,portmask = <0x3>;
  91                 };
  92
  93                 ifxhcd@E106000 {
  94                         status = "okay";
  95                 };
  96         };
  97
  98         gphy-xrx200 {
  99                 compatible = "lantiq,phy-xrx200";
 100                 firmware = "lantiq/vr9_phy11g_a2x.bin";
 101                 phys = [ 00 01 ];
 102         };
 103
 104         gpio-keys-polled {
 105                 compatible = "gpio-keys-polled";
 106                 #address-cells = <1>;
 107                 #size-cells = <0>;
 108                 poll-interval = <100>;
 109                 dect {
 110                         label = "dect";
 111                         gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
 112                         linux,code = <KEY_PHONE>;
 113                 };
 114                 wifi {
 115                         label = "wifi";
 116                         gpios = <&gpio 29 GPIO_ACTIVE_HIGH>;
 117                         linux,code = <KEY_WLAN>;
 118                 };
 119         };
 120
 121         gpio-leds {
 122                 compatible = "gpio-leds";
 123
 124                 power_green: power {
 125                         label = "fritz7360sl:green:power";
 126                         gpios = <&gpio 32 GPIO_ACTIVE_LOW>;
 127                         default-state = "keep";
 128                 };
 129                 power_red: power2 {
 130                         label = "fritz7360sl:red:power";
 131                         gpios = <&gpio 33 GPIO_ACTIVE_LOW>;
 132                 };
 133                 info_red {
 134                         label = "fritz7360sl:red:info";
 135                         gpios = <&gpio 34 GPIO_ACTIVE_LOW>;
 136                 };
 137                 info_green: info_green {
 138                         label = "fritz7360sl:green:info";
 139                         gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
 140                 };
 141                 wifi: wifi {
 142                         label = "fritz7360sl:green:wlan";
 143                         gpios = <&gpio 36 GPIO_ACTIVE_LOW>;
 144                 };
 145                 dect {
 146                         label = "fritz7360sl:green:dect";
 147                         gpios = <&gpio 35 GPIO_ACTIVE_LOW>;
 148                 };
 149         };
 150 };
 151
 152 &eth0 {
 153         lan: interface@0 {
 154                 compatible = "lantiq,xrx200-pdi";
 155                 #address-cells = <1>;
 156                 #size-cells = <0>;
 157                 reg = <0>;
 158                 mtd-mac-address = <&urlader 0xa91>;
 159                 mtd-mac-address-increment = <(-2)>;
 160                 lantiq,switch;
 161
 162                 ethernet@0 {
 163                         compatible = "lantiq,xrx200-pdi-port";
 164                         reg = <0>;
 165                         phy-mode = "rmii";
 166                         phy-handle = <&phy0>;
 167                 };
 168                 ethernet@1 {
 169                         compatible = "lantiq,xrx200-pdi-port";
 170                         reg = <1>;
 171                         phy-mode = "rmii";
 172                         phy-handle = <&phy1>;
 173                 };
 174                 ethernet@2 {
 175                         compatible = "lantiq,xrx200-pdi-port";
 176                         reg = <2>;
 177                         phy-mode = "gmii";
 178                         phy-handle = <&phy11>;
 179                 };
 180                 ethernet@3 {
 181                         compatible = "lantiq,xrx200-pdi-port";
 182                         reg = <4>;
 183                         phy-mode = "gmii";
 184                         phy-handle = <&phy13>;
 185                 };
 186         };
 187
 188         mdio@0 {
 189                 #address-cells = <1>;
 190                 #size-cells = <0>;
 191                 compatible = "lantiq,xrx200-mdio";
 192                 phy0: ethernet-phy@0 {
 193                         reg = <0x00>;
 194                         compatible = "ethernet-phy-id004d.d076", "ethernet-phy-ieee802.3-c22";
 195                         reset-gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
 196                 };
 197                 phy1: ethernet-phy@1 {
 198                         reg = <0x01>;
 199                         compatible = "ethernet-phy-id004d.d076", "ethernet-phy-ieee802.3-c22";
 200                         reset-gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
 201                 };
 202                 phy11: ethernet-phy@11 {
 203                         reg = <0x11>;
 204                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 205                 };
 206                 phy13: ethernet-phy@13 {
 207                         reg = <0x13>;
 208                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 209                 };
 210         };
 211 };
 212
 213 &pcie0 {
 214         pcie@0 {
 215                 reg = <0 0 0 0 0>;
 216                 #interrupt-cells = <1>;
 217                 #size-cells = <2>;
 218                 #address-cells = <3>;
 219                 device_type = "pci";
 220
 221                 wifi@168c,002e {
 222                         compatible = "pci168c,002e";
 223                         reg = <0 0 0 0 0>;
 224                         qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:01:00.0.bin */
 225                 };
 226         };
 227 };